LED
WET LOCATION
TAMPER RESISTANT
LUTRON DIMMING
OS 6" Round Retrofit/Remodel Tamper Resistant
SGRTP6LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
Round OS Tamper Resistant retrofit/remodel downlight.
FEATURES
Tamper Resistant hardware with stainless steel bezel and flush lens. Captive stainless hardware. Polycarbonate underlay option for impact resistance (PC). Lens is silicone sealed to prevent dust or moisture from entering optical chamber. Designed for retrofit into existing fixture, or remodel where no fixture exists. Intended for Non-IC retrofit. Posi-lock trim retention torsion springs. Includes set of three retrofit clips to accommodate
most installations. Fixture will work in up to 1" thick ceiling.
TRIM FINISH
A variety of architectural powdercoat and anodized finishes are available.
ELECTRONICS
LED module features high brightness white Osram LEDs. 3-step MacAdam Ellipse binning and CRI 84 minimum. Full range of electronic 120V/277V and dimming drivers.
CONSTRUCTION
Housing/frame constructed of #20 ga. galvanized steel to resist corrosion. Stainless steel bezel finished to specification. Passive machined aluminum heatsink.
CODE COMPLIANCE
ARRA Compliant. Non-IC rated. ETL/CSA listed for damp locations. Optional Wet location. LM79/LM80/TM21 data available. Manufactured and tested to UL standards No. 1598/8750.
Spec Sheet
|