Site Map

The following is a list of all the content on our site.

Product:

INC Warehouse Shade Int./Ext.

WS1210INC,WS1410INC,WS1611INC,
WS1812INC,WS2015INC

INTERIOR / EXTERIOR


APPLICATION
The Warehouse Shade is one of our most popular RLM styles for general lighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Warehouse Dome w/ Door Interior Only

WD1611INC,WD1812INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Warehouse Dome is designed for decorative general illumination. Domed deco lens glows softly. INC Series is designed for covered or indoor dry/damp locations.

INC Warehouse Dome Int./Ext.

WD1611INC,WD1812INC,WD2015INC
INTERIOR / EXTERIOR


APPLICATION
The Warehouse Dome is designed for decorative general illumination. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Wall Mount Int./Ext.

DL1600INC
INTERIOR / EXTERIOR


APPLICATION
Decorative wall mount fixture casts light back onto wall surface. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Vapor Tight Series Int./Ext.

WJ1INCX2 - SURFACE MOUNT
INTERIOR / EXTERIOR


APPLICATION
The Vapor Tight Series offers rugged design and three mounting options. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Tech Tier Series Int./Ext.

TT0510INC,TT1010INC,TT1610INC
INTERIOR / EXTERIOR


APPLICATION
Tech Tier series for decorative general area lighting. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Subway Series Int./Ext.

SJ1INC - SURFACE MOUNT
INTERIOR / EXTERIOR


APPLICATION
The INC Subway Series offers rugged design and decorative perforated accent. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Subway Series Int./Ext.

WJ1INC - WALL MOUNT
INTERIOR / EXTERIOR


APPLICATION
The LED Bulkhead Series offers rugged design.
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Subway Series Int./Ext.

SB1016INC
INTERIOR / EXTERIOR


APPLICATION
The Subway series inspired by the Boston “T” Train offers rugged design and a variety of decorative options. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Subway Series Int./Ext.

SB1014INC
INTERIOR / EXTERIOR


APPLICATION
The Subway series inspired by the Boston “T” Train offers rugged design and a variety of decorative options. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Subway Series Int./Ext.

PJ1INC - PENDANT MOUNT
INTERIOR / EXTERIOR


APPLICATION
The LED Bulkhead Series offers rugged design and three mounting options. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Subway Series Int./Ext.

WJ2INC - WALL MOUNT
INTERIOR / EXTERIOR

APPLICATION
The LED Bulkhead Series offers rugged design.
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Stepped Glass Interior Only

ST1310INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
The Stepped Glass Bankers Light offers traditional looks with modern lamping options. INC Series is designed for covered or indoor dry/damp locations.

INC Stepped Dome Interior Only

SD1208INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Cafe series offers a playful variety of fixture shapes. 
INC Series is designed for covered or indoor dry/damp locations.

INC Step Cylinder

SPTB703

APPLICATIONS
Step Neck “Classic” PAR tracklight.
FEATURES
For Use with Spectrum Lighting “Basix” Track.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V only.
LABELS
UL listed to Standard No. 1598.

INC Stagecoach Interior/Exterior

SV1007INC,SV1411INC
INTERIOR / EXTERIOR


APPLICATION
The Stagecoach Shade RLM has a classic bell shape for decorative downlighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Spike Sconce Series

FRMC0314UDINC

APPLICATION

Spike Sconce for decorative wall accent lighting.
FEATURES
Speclume series fixtures offers contemporary style with functional luminaire performance. All fixtures are designed and manufactured in our factory. Spike wall sconce sits flat against wall and projects “Hot” light pattern against wall for dramatic effect. A variety of lens, wattage and other options available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
50 watt max MR16. 120 volt standard (E1). 277 volt optional (E2).
CONSTRUCTION
Fixtures are fabricated in our factory from aluminum extrusion.
LABELS
ARRA Compliant. ETL/UL/CSA listed for damp locations. Manufactured and tested to UL standards No. 1598.

INC Small Schoolhouse Shade Int. Only

SS0806INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
The Small Schoolhouse Shade is ideal for entryways and as a wall mount sconce. 
INC Series is designed for covered or indoor dry/damp locations.

INC Sign Light Series

SL0306INC

APPLICATION
The Sign Light is perfect for a variety of sign and surface lighting applications.
FEATURES
Spectrum Lighting's RLM Series are interpretations of classic lighting fixtures reimagined with modern INC light sources and materials. The wide range of combinations for illumination, mounting, enclosures, guards and finishes allows for creative fixture specification and design. A variety of lamp enclosures are available as well as guards and light shields. Fixtures may be wall or pendant mounted with standard or custom wall arm (goosenecks) and pendants. MR16 and LED lamping available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
CONSTRUCTION
Fixture shades are spun in our factory from 0.063 high purity aluminum. Wall enclosures and fittings are die-cast aluminum with stainless steel hardware. Wall arms are formed 3/4 NPT aluminum pipe. Gaskets are machine cut neoprene.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and tested to UL standard No. 1598.

INC SHS Theatrical Tracklight

SHSINC
APPLICATIONS
SHS series theatrical track fixture for PAR30/PAR38 incandescent lamps.
FEATURES
Tilt and rotation points for optimal aiming. SHSSR Sparkle Design option. Integral barn doors.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.

INC Short Warehouse Shade Int./Ext.

SW1509INC,SW1910INC
INTERIOR / EXTERIOR


APPLICATION
The Short Warehouse Shade is a shallow version of most popular Warehouse Shades. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Ship Light Interior Only

PY1824INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Ship Light fixture evokes classic nautical fixture design. 
INC Series is designed for covered or indoor dry/damp locations.

INC Schoolhouse Shade Int. Only

SS12INC,SS14INC,SS16INC,SS18INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Decorative glass pendant schoolhouse shade for general area lighting. 
INC Series is designed for covered or indoor dry/damp locations.

INC SAR38 Canopy Stage Tracklight

SAR38INC

APPLICATIONS

SAR Series surface mount track fixture for Incandescent lamps.
FEATURES
Three tilt and rotation points for optional aiming.
Rotation lock available on TEK100HTEK100 and GA100 adaptors.
Accepts up to 3 accessories.
Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations.
Manufactured and tested to UL Standards No. 1598.

INC Round Back Cylinder

SPTB718

APPLICATIONS
Round back “Classic” PAR tracklight.
FEATURES
For Use with Spectrum Lighting “Basix” Track.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V only.
LABELS
UL listed to Standard No. 1598.

INC Retro Pendant

ALAT18INC

APPLICATION
Retro Pendant offers a clean, simple design for area lighting. INC Series is designed for indoor damp locations or outdoor wet locations

INC Rayed Bullet Interior Only

RB70INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Cafe series offers a playful variety of fixture shapes. 
INC Series is designed for covered or indoor dry/damp locations.

INC Radial Wave Interior/Exterior

RW1205INC, RW1405INC
INTERIOR / EXTERIOR


APPLICATION
The Radial Wave is a classic RLM “Wave” style for decorative area lighting. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Quadro 6" / 8" Pendant

CY0618SQFAINC, CY0820SQFAINC
 

APPLICATION
Quadro 6" and 8" Pendants features clean design for a variety of architectural area lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations

INC Quadro 15" Pendant

CY1520SQFAINC

APPLICATION
Quadro 15" Pendant features a clean design for a variety of architectural area lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations

INC Quadro 12" Pendant

CY1226SQFAINC


APPLICATION
Quadro 12" Pendant features clean design for a variety of architectural area lighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Prismatic 12"/16"/22" DDH Series

PRDDH12INC,PRDDH16INC,PRDDH22INC

APPLICATION
Prismatic Acrylic Tech pendant offers modern style with a variety of lamping options.

INC PAR56 Stage Tracklight

SAR56INC

APPLICATIONS

Stage lighting style track head for PAR56 lamping.
FEATURES
Housing tilts and locks for precision aiming.
Beam rotation lock.
Rotation lock available on TEK100 and GA100 adaptors.
Accepts up to 3 accessories.
Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
Variety of dimming, controls and battery backup available.
LABELS
Manufactured and tested to UL standard No. 1598. ETL Listed.

INC PAR38 Stage Tracklight

SAR38INC
APPLICATIONS
PAR38 rugged stage lighting style track head for Incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 2 accessories. Positive lock bracket disk. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.

INC PAR38 Stage Tracklight

SNR38INC

APPLICATIONS
PAR38 Stage lighting style track head with integral one piece snoot
for Incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 2 accessories. Positive locking bracket. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.

INC PAR30L Series 6" Regressed Razor

RC66NF3INC, RC612NF3INC, RC618NF3INC, RC624NF3INC
REGRESSED RAZOR EDGE / NON-IC RATED


APPLICATION
RC series PAR30L Incandescent modular fixture for retail, residential and commercial accent lighting.

INC PAR30L Series 6" Regressed Beveled

RC66RT3INC, RC612RT3INC, RC618RT3INC, RC624RT3INC
REGRESSED BEVELED FLANGED / NON-IC RATED


APPLICATION
RC series PAR30L Incandescent modular fixture for retail, residential and commercial accent lighting.

INC PAR30L Series 6" Flush Flat

RC66FT3INC, RC612FT3INC, RC618FT3INC, RC624FT3INC
FLUSH FLAT FLANGED / NON-IC RATED


APPLICATION
RC series PAR30L Incandescent modular fixture for retail, residential and commercial accent lighting.

INC PAR30 Stage Tracklight

SAR30INC
APPLICATIONS
PAR30 stage lighting track head for Incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
120V only.
CODE COMPLIANCE
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.

INC PAR20 Stage Tracklight

SAR20INC
APPLICATIONS
PAR20 mini stage lighting track head for incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.

INC PAR20 Series 6" Regressed Razor

RC66NF2INC, RC612NF2INC, RC618NF2INC, RC624NF2INC
REGRESSED RAZOR EDGE / NON-IC RATED


APPLICATION
RC series PAR20 Incandescent modular fixture for retail, residential and commercial accent lighting.

INC PAR20 Series 6" Regressed Beveled

RC66RT2INC, RC612RT2INC, RC618RT2INC, RC624RT2INC
REGRESSED BEVELED FLANGED / NON-IC RATED


APPLICATION
RC series PAR20 Incandescent modular fixture for retail, residential and commercial accent lighting.

INC PAR20 Series 6" Flush Flat

RC66FT2INC, RC612FT2INC, RC618FT2INC, RC24FT2INC
FLUSH FLAT FLANGED / NON-IC RATED


APPLICATION
RC series PAR20 Incandescent modular fixture for retail, residential and commercial accent lighting.

INC PAR20 MD Tracklight

CAR20MDINC

APPLICATIONS
Mini cylinder lighting track head for PAR20 lamps.
FEATURES
Designed for shallow mounting areas (5.3" to track). Quick twist front bezel. Max watts label for low watts, Inc or LED lamps. Tilt and rotation points for optional aiming.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Machined and cast aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.

INC PAR Basix Line Voltage Tracklight

TL880PAR20, TL880PAR30, TL880PAR38

APPLICATIONS

Spectrum Basix track for line voltage PAR lamp base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.

INC PAR Basix Line Voltage Tracklight

TL704S, TL704M, TL704L

APPLICATIONS

Spectrum Basix track for line voltage PAR lamp base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.

INC PAR Basix Line Voltage Tracklight

TL960

APPLICATIONS

Spectrum Basix track for line voltage PAR lamp base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.

INC PAR 4" Round Trimless Downlight

SG4PZIN

APPLICATION

4" aperture series with deep cutoff for flush fit plaster installations.
FEATURES
Efficient reflector design optimized for Incandescent or LED lamps. Posi-lock reflector attachment. Integral 5/8" (0.625) plaster ring. Maximum wattage label (MWL) for low wattage Incandescent or LED lamps. Tool-less ballast access. Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector. Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120 Volt is standard.  Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel. Reflectors spun from .063 high purity aluminum and finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598. ETL listed for damp locations.

INC Open Reflector Int. Only

OR1212, OR1818

APPLICATION
The Open Reflector RLM offers 80% downlight and 20% up-light.

INC Open 3" Round Cylinder

SPC0306INC
APPLICATION
3" Compact round cylinder series for use with PAR lamps. 
 

INC Nautical Light Interior/Exterior

NL1008INC
INTERIOR / EXTERIOR

APPLICATION
Nautical Light RLM series for decorative area lighting. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Nautical Light Interior/Exterior

NL1012INC
INTERIOR / EXTERIOR


APPLICATION
Nautical Light RLM series for decorative area lighting. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Mini Dock Light Int./Ext.

DG09INC,DS09INC,DV06INC
INTERIOR / EXTERIOR


APPLICATION
Mini Dock Light INC Series for area lighting. 
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Milk Shade Interior Only

GS1410INC,GS2112INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
The Milk Shade Pendant offers traditional looks with modern lamping options. 
INC Series is designed for covered or indoor dry/damp locations.

INC Lava Cone Interior Only

LC50INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Cafe series offers a playful variety of fixture shapes. 
INC Series is designed for covered or indoor dry/damp locations.

INC Icon 7" Glass Pendant

DP7FGINC

APPLICATION
The Icon Pendant series features curved molded glass shade for decorative area lighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Icon 7" Aluminum Pendant

DP7ALINC

APPLICATION
The Icon Pendant series features curved hand spun aluminum shade for decorative area lighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Icon 12" Glass Pendant

DP12FGINC

APPLICATION
The Icon Pendant series features curved molded glass shade for decorative area lighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Icon 12" Aluminum Pendant

DP12ALINC
 

APPLICATION
The Icon Pendant series features curved hand spun aluminum shade for decorative area lighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Half Dome

HD24INC 
APPLICATION
Half dome hemisphere pendant for decorative area lighting.
 

INC GU10 Basix Line Voltage Tracklight

TL010GU10

APPLICATIONS
Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. Accepts up to 3 accessories. Front Loading lamp / accessory ring adaptors fit a wide range of lamps. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.

INC GU10 Basix Line Voltage Tracklight

TL020GU10

APPLICATIONS

Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun and Die-cast aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.

INC GU10 Basix Line Voltage Tracklight

TL030GU10

APPLICATIONS
Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun and Die-cast aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.

INC GU10 Basix Line Voltage Tracklight

TL040GU10

APPLICATIONS

Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.

INC Giant Globe Radius Fitter Pendant

GPRF1200INC, GPRF1600INC, GPRF2000INC, GPRF2400INC

APPLICATION
Giant frosted acrylic globe fixture for area lighting with Radius fitter. INC Series is designed for indoor damp locations

INC Giant Dome Interior Only

GD2619INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Giant Dome fixture offers wide distribution for general illumination. 
INC Series is designed for covered or indoor dry/damp locations.

INC Flat Pendant Interior Only

FP1906INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Cafe series offers a playful variety of fixture shapes. 
INC Series is designed for covered or indoor dry/damp locations.

INC Flat Back Cylinder

SPTB704

APPLICATIONS
Flat back “Classic” PAR can tracklight.
FEATURES
Rotates 359° degrees, tilts 60° degrees.
Front loading MR16 lamp/lens.
For use with Spectrum Basix track (TM3) series.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V only.
LABELS
UL listed to Standard No. 1598.

INC Expanded Dome Int./Ext.

ED2015INC
INTERIOR / EXTERIOR


APPLICATION
The Expanded Dome has an LED integral driver and LED for a simple installation. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Euro Bullet Interior Only

ET60INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Cafe series offers a playful variety of fixture shapes. 
INC Series is designed for covered or indoor dry/damp locations.

INC Espresso Pendant

EP1010INC, EP1414INC

APPLICATION
Espresso is a popular European styled pendant fixture. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Emblem Sign Interior/Exterior

EB0910INC,EB1214INC
INTERIOR / EXTERIOR


APPLICATION
Emblem Sign light is perfect for a variety of sign and surface lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Domo Pendant

EG1612INC
APPLICATION
Domo Pendant is perfect for decorative and retail lighting.
 

INC Dodger Pendant

PAC0609INC, PAC0618INC, PAC0624INC,
PAC0810INC, PAC0820INC, PAC0824INC

APPLICATION
Dodger Pendant originally designed for Dodgers Stadium. Now available for decorative area lighting. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Deep Bowl Interior/Exterior

DB1009INC,DB1211INC,DB1413INC,
DB1615INC,DB1817INC

INTERIOR / EXTERIOR


APPLICATION
The Deep Bowl is one of our most popular RLM styles for general lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.

INC Dedal Pendant

TD1617INC
APPLICATION
Dedal Pendant is perfect for decorative and retail lighting.
 

INC Decorative Socket Pendant

DSP1INC, DSP2INC, DSP3INC, DSP4INC, DSP5INC
INTERIOR ONLY / DAMP LOCATION

APPLICATION
Decorative socket pendant for use with LED and incandescent lamps.
INC Series is designed for indoor locations.

INC Decorative Cast Gimbal

SPTB720S, SPTB720M, SPTB720L

APPLICATIONS
Spectrack basix series decorative die cast gimbal.
FEATURES
Unique front bezel adjusts to fit a variety of lamps including LED PAR lamps. Rotates 359° degrees, tilt 60° degrees. For use with Spectrum Basix track (TM3) series.
FINISH
Black, white and satin nickel available.
CONSTRUCTION
Die cast aluminum.
ELECTRONICS
120v only.
LABELS
UL/ETL listed for dry location. Manufactured and tested to UL standard No. 1598.

INC Deco Lamp Options
INC Cylindro 6"/8" Pendant

CY0618RDFAINC, CY0820RDFAINC
 

APPLICATION
Cylindro 6" and 8" Pendant features a clean design for a variety of architectural area lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Cylindro 6" Perforated Pendant

PF0614INC
 

APPLICATION
Cylindro 6" Pendant features a clean design for a variety of architectural area lighting application. Perforated edge creates sparkle effect. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Cloud 10" Surface Light

SX1003RDINC
APPLICATION
Cloud 10" surface light for area illumination.
 

INC Bullet Interior Only

BU40INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Cafe series offers a playful variety of fixture shapes. 
INC Series is designed for covered or indoor dry/damp locations.

INC Bistro Pendant

AF0609INC, AF0618INC, AF0624INC, AF0810INC, AF0820INC

APPLICATION
Bistro Pendant decorative area light is inspired by contemporary architecture. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Ballston Semi Direct Pendant

BL1317INC


APPLICATION
Ballston Pendant for general decorative illumination.

INC Angled Reflector with Adjustable Lamp

AR1214INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Angled Reflector light is perfect for a variety of sign and surface lighting applications. INC Series is designed for covered or indoor dry/damp locations.

INC Angled Contemporary Interior Only

AC1007INC
INTERIOR ONLY / DAMP LOCATION


APPLICATION
Cafe series offers a playful variety of fixture shapes. 
INC Series is designed for covered or indoor dry/damp locations.

INC Angle Reflector Int./Ext.

AR1012INC,AR1214INC
INTERIOR / EXTERIOR


APPLICATION
Angled Reflector light is perfect for a variety of sign and surface lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Acrylic Deco Tier

CY0608INC

APPLICATION
Acrylic Deco Tier features floating acrylic shade to obscure light source and cast a decorative light pattern on ceiling. INC Series is designed for indoor damp locations or outdoor wet locations.

INC Accent Corner Surface Mount

CM1010INCX1, CM1020INCX2, CM1030INCX3, 
CM1040INCX4

APPLICATION
CM10 series modular accent light designed for ceiling corner mounting.

INC 8" Round Pull Down Accent

SGP8IN/PDWH/8402, SGP8IN/PDBL/8402
 

APPLICATION
Adjustable Pull Down PAR30/ PAR38 accent light for Incandescent lamps.
FEATURES
Fixture rotates 360°/ locks 35°/ pulls down 6".
Can be set fully recessed or fully pulled down.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.

INC 8" Round Open Downlight

APPLICATION
8" Round PAR30/ PAR38 open downlight for Incandescent lamps.
FEATURES
Efficient trim design for PAR lamps.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.

FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp location.
Manufactured and tested to UL Standard No. 1598.

INC 8" Round Open Downlight

APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.

INC 8" Round Lens Downlight

APPLICATION
Series features a deep reflector and a wide variety of lenses and splays.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.

INC 8" Round Lens Downlight

APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp location. Wet location available.
Manufactured and tested to UL Standard No. 1598.

INC 8" Round Lens Adjustable

SGA8IN/AR8500, SGA8IN/AR8550

APPLICATION
8" Round PAR30/ PAR38 accent light for Incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 360°. Lamp tilts/ locks 35°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.


 

INC 6" Square Open Downlight

SGD6SQIN/AR0606, SGD6SQIN/AR0306

APPLICATION
6" Square PAR30/ PAR38 downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.

INC 6" Square Open Cylinder PAR

SPC0609SQINC

APPLICATION

6" Square cylinder series for use with incandescent PAR lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Formed .063 aluminum reflector/trim finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Square Open Adjustable

SGA6SQIN

APPLICATION
6" square PAR30/ PAR38 accent light for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 360°. Lamp tilts/ locks 35 °.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.


 

INC 6" Square Lens Wall Wash

APPLICATION
6" Square PAR30/ PAR38 lens wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.

INC 6" Round Open Downlight

APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.

INC 6" Round Open Cylinder w/ Yoke

SPCYK0609INC

APPLICATION

6" Diameter cylinder series for use with incandescent PAR lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Round Open Cylinder PAR

SPC0609INC

APPLICATION

6" Diameter cylinder series for use with incandescent PAR lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Round Lens Downlight

APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.

INC 6" Round Lens Cylinder w/ Yoke

SPCYK0609INC

APPLICATION

6" Diameter cylinder series for use with incandescent PAR lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Round Lens Cylinder PAR

SPC0609INC

APPLICATION

6" Diameter cylinder series for use with incandescent PAR lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Round Direct/Indirect Open

SPC0618UDINC

APPLICATION

6" Cylinder series provides direct & indirect lighting for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded and machined 6063 seamless aluminum fixture housing. Silicone gasket seals optical chamber. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. One piece finish trim spun from .063 thick high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Round Direct/Indirect Lens

SPC0618UDINC

APPLICATION

6" Cylinder series provides direct & indirect lighting for use with incandescent lamps. 

FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded and machined 6063 seamless aluminum fixture housing. Silicone gasket seals optical chamber. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. One piece finish trim spun from .063 thick high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Wet location optional. Manufactured and built to UL standard No. 1598.

INC 6" Round Adjustable Cylinder PAR

SPC0609ADJINC

APPLICATION

6" Internally Adjustable Cylinder Series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Round Adjustable Cylinder PAR

SPC0612ADJINC

APPLICATION

6" Diameter cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 6" Direct/Indirect Cylinder PAR

SPC0618SQUDINC

APPLICATION

6" Square cylinder series provides direct and indirect lighting for use with incandescent lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Formed seamless aluminum fixture housing. Silicone gasket seals optical chamber. Specular primary optical reflectors provide high efficiency illumination optional. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. One piece finish trim spun from .063 thick high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Wet location option. Manufactured and built to UL standard No. 1598.

INC 6" Deco Frosted Acrylic Accent

SPCY0620UDINC
 

APPLICATION
Deco frosted acrylic accent features a clean design for a variety of architectural area lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations.

INC 6" Adjustable Retrofit Series

SGRTA6INC

APPLICATION

6" Round adjustable retrofit accent PAR38 fixture for general downlighting.
FEATURES
Designed for retrofit into existing fixture, or remodel where no fixture exists. Tool-less access.One piece-self-flanged trim. Intended for Non-IC retrofit. Goof ring available for oversized or damaged ceiling installations. Posi-lock trim retention torsion springs. Designed for 0.5" - 1" thick ceilings. Contact factory for ceiling applications (over 1").
FINISH
Variety of powdercoat and anodized finishes available.
ELECTRONICS
120 Volt is standard.  Use option T277 for 277v supply feed.
CONSTRUCTION
Housing/frame constructed of .060 aluminum to resist corrosion. Self flanged one piece trim spun from 0.060" thick high purity aluminum and finished to specification.
INSTALLATION
Goof rings available for rough or OB-Round holes. Integral retrofit quick mount clips. Optional clips, springs and extended whips available (See options and installation details).
LABELS
ARRA Compliant. UL/ETL Listed for Damp location. Manufactured and tested to UL standard No. 1598.

INC 5" Shallow Adjustable Accent

SGA5SIN

APPLICATION

5" Shallow round PAR30 accent light for incandescent lamps.

INC 5" Round Open Downlight

APPLICATION
5" aperture open downlight series for Incandescent lamps.
FEATURES
Efficient reflector design accomodates A, PAR, and R lamps.
Intended for Non-IC new construction.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.

INC 5" Round Open Downlight

SGD5IN/AR5400, SGD5IN/AR5450

APPLICATION
5" Round PAR20/ PAR30 downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location available.
Manufactured and tested to UL Standard No. 1598.


 

INC 5" Round Open Cylinder PAR20

SPC0507INC

APPLICATION

5" Cylinder Series for use with PAR16 and PAR20 lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 5" Round Lens Downlight

APPLICATION
5" aperture lens downlight series with a wide variety of lenses and splays.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.

ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.

INC 4"-12" Rtrofit Downlight Ring

SGRM4IN, SGRM5IN, SGRM6IN, SGRM7IN, SGRM8IN, SGRM9IN, SGRM10IN, SGRM12IN

• Easy to install remodeling system.
• .063 Heavy gauge reflector, self flange/white flange standard.
• Remodel ring made of 20 gauge galvanized steel for corrosion resistance.
• Many finishes available on reflectors and flanges.
• Return flange on ring for positive "stop".
Aid in "trimming out" ceiling opening.
• Mounting hardware provided.
• Options include extended whip length.
• Junction box removable, 13" whip standard
• Electronic ballast 120/277.
• ETL listed

INC 4"-12" Retrofit Split Frame

SPRM4IN, SPRM5IN, SPRM6IN SPRM7IN, SPRM8IN, SPRM9IN, SPRM10IN, SPRM12IN

Easy to install remodeling system.
.063 Heavy gauge reflector, self flange/white flange standard.
Frame with junction box (and ballast) fits into existing aperture.
Many finishes available on reflectors and flanges.
Positive locking clips on frame to secure reflector.
Options include extended whip lengt, UL Listed.
Made in USA.

INC 4"-12" Retrofit Downlight Series

SGRT4IN, SGRT5IN, SGRT6IN, SGRT7IN, SGRT8IN, SGRT9IN, SGRT10IN, SGRT12IN

• Easy to install remodeling system, for installations where frame is existing.
• . 063 Heavy gauge reflector, self flange/white flange standard.
• Other finishes and trims may be available.
• Options include extended whip length, goof ring, and fusing.
• 13” whip standard.
• Manufactured and tested to UL standard No. 1598.

INC 4" Square Open Downlight

APPLICATION
Square aperture MR16 downlight with good cutoff.
FEATURES
Efficient trim design optimized for Halogen lamps.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.  Wet location available.
Manufactured and tested to UL Standard No. 1598.

INC 4" Square Open Downlight

APPLICATION
4" square PAR20 downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL listed for damp locations. Wet locationavaliable.
Manufactured and tested to UL Standard No. 1598.


 

INC 4" Square Open Adjustable

APPLICATION
4" Square PAR20 accent light for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 36°. Lamp tilts/ locks 35°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.


 

INC 4" Round Open Downlight

APPLICATION
Small aperture series with medium cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
ETL listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.

INC 4" Round Open Downlight

APPLICATION
4" Round PAR20 downlight for Incandescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.


 

INC 4" Round Open Downlight

APPLICATION
4" aperture series with deep cutoff for Incandescent lamps.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.
ETL listed for Damp locations.

INC 4" Round Lens Wall Wash

APPLICATION
4" round PAR20 lens wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Lamp/ trim rotate 360°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.

INC 4" Round Lens Wall Wash

SGL4SQIN

APPLICATION

4" Square spread lens wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 360°. Lamp tilts/locks 35°.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.

INC 4" Round Lens Adjustable

SGA4IN/AR4500

APPLICATION
4" Round PAR20 accent light for incandescent lamps.
FEATURES
Trim rotates/ locks 360°, lamp tilts/ locks 35°
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.

INC 4" Round Cylinder PAR20/PAR30S

SPC0405INC

APPLICATION

4" Cylinder Series for use with PAR20 lamps.
 

INC 3" Round Up Down Cylinder

SPC0310UD
APPLICATION
3" Mini wall up down cylinder for hallways and walkway lighting is ADA Compliant.  
 

INC 3" Round Cylinder

SPC0310D
3" Mini wall cylinder for hallways and walkway lighting is ADA Compliant.  
 

INC 3" Mini Square Cylinder PAR20

SPC0306SQINC

APPLICATION

3" Compact square cylinder series for use with PAR lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Stainless steel hardware with galvanized steel brackets to resist corrosion. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 3" Mini Round Cylinder PAR20

SPC0304INC

APPLICATION

3" Compact round cylinder series for use with PAR lamps. 
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Stainless steel hardware with galvanized steel brackets to resist corrosion. 
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.

INC 2'x2' Grid Ceiling 4 x PAR38

GC24244XPAR38INC
FLUSH TRIM / NON-IC RATED


APPLICATION
GC 2' x 2' Series INC accent light designed for automotive and retail applications where crisp focused light is desired.

INC 2'x2' Grid Ceiling 2 x PAR38

GC24242XPAR38INC
FLUSH TRIM / NON-IC RATED


APPLICATION
GC 2' x 2' Series INC accent light designed for automotive and retail applications where crisp focused light is desired.

INC 2'x2' Grid Ceiling 1 x PAR38

GC24241XPAR38INC
FLUSH TRIM / NON-IC RATED


APPLICATION
GC 2' x 2' Series INC accent light designed for automotive and retail applications where crisp focused light is desired.

INC 12" Round Open Downlight

APPLICATION
Series features a deep reflector and excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.

INC 12" Round Lens Downlight

APPLICATION
12" aperture horizontal A-lamp lens downlight.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.

INC 12" Round Lens Downlight

APPLICATION
Series features a deep reflector and a wide variety of lenses and splays.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.

INC 12" / 16" Prismatic DDT Series 100W Max

PRDDT12INC, PRDDT16INC - PRISMATIC REFRACTOR
APPLICATION
Lumen Max Incandescent High/Low Bay is designed for gymnasium, retail and industrial lighting.
 

INC 10" Round Open Downlight

APPLICATION
Series features a deep reflector and excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.

INC 10" Round Lens Downlight

APPLICATION
Series features a deep reflector and a wide variety of lenses and splays.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.

Feature Article

Insulated Ceiling Specification and Limitations
Intertek Scope of Accreditation

Complete Site Directory