Category:
- Contact
- Products
- Representative Access
- Resources
- Spectrum Lighting
- Manufacturing
- Paint Shop
- Sheet Metal Shop
- Spinning
- Tool & Die Machining
- Welding Shop
- Cylinder Series
- Lumen Max High Bays
- MULTIPLES SERIES
- Quick Ship
- Recessed Fixtures
- Retrofits Remodelights
- RLM Classics
- Specline Linear
- Speclume Decorative
- Spectrac Track Lighting
- Color Options
- Dimming
- Emergency Battery
- Forms
- Literature
- Options + Info
- Project Galleries
- Remodel Lighting Request
- Warranties & Compliances
- Cylinder Series
- Lumen Max High Bays
- Multiples Series
- Recessed Fixtures
- Retrofits Remodelights
- RLM Classics
- Speclume Decorative
- Spectrac
- Email Spectrum
- Find a Rep
- Personnel and Contacts List
- Pricesheets
Product:
- XT Vapor Tight Series
WJ1LEDTX2
APPLICATION
The XI Series LED Vapor Tight series with T-fitting for twin fixture mount.
FEATURES
Spectrum Lighting’s RLM Classics are reproductions of early American lighting fixtures reimagined with modern LED light sources and materials. The wide range of combinations for lamping, mounting, enclosures, guards and finishes allows for creative fixture specification and design. Frosted lamp enclosure (FJ1) is standard. A variety of colored lamp enclosures are available as well as guards and light shields. LED module and driver are serviceable for future replacement.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
LED system features Xicato LED module with proprietary phosphor technology that converts high brightness blue LEDs into uniform white light. Designed to provide consistent, stable color with CCT control of +/- 100K over life of the light engine. Base CRI is 80 with 90, 95 CRI and VividTM options. Variety of electronic 120v/277v and dimming drivers.
CONSTRUCTION
Fixture is constructed of spun and die-cast heavy gauge aluminum.
CODE COMPLIANCE
ARRA Compliant. ETL/UL/CSA for damp locations. Optional Wet location. Manufactured and tested to UL standards No. 1598/8750.- XT Subway Series
SJ1LEDXT
APPLICATION
The LED Subway Series offers rugged design and decorative perforated accent.- XT STV 4" Tracklight 5000Lm
STV4XT
APPLICATION
STV 4" Powertrack Series tracklight for accent, display lighting, high ceiling and general illumination.- XT STT 4" Tracklight 3000Lm
STT4XT
APPLICATION
STT 4" Powertrack Series tracklight for accent, display lighting and general illumination.
- XT STT 3" Tracklight 2000Lm
STT3XT
APPLICATIONS
STT 3" Euro Series track light for accent, display and general illumination.- XT STQ 16" Tracklight 3000Lm
STQ16LEDXT, STX16LEDXT
APPLICATION
STQ 16" Photo Style Series tracklight for accent display lighting and decorative lighting application.
- XT STH 4" Tracklight 5000Lm
STH4XT
APPLICATION
STH 4" Powertrack Series LED tracklight for accent, display lighting, high ceiling, and general illumination.- XT STC 4" Surface Light 4000Lm
STC4XT
APPLICATION
STC 4" Euro Series surface light for accent, display and general illumination.
- XT STC 3" Surface Light 2000Lm
STC3XT
APPLICATION
STC 3" Euro Series surface light for accent, display and general illumination.
- XT Sign Light Series
SL0306LEDXT
APPLICATION
3" diameter machined aluminum Sign Light for focused adjustable spot lighting.
FEATURES
The wide range of combinations for illumination, mounting and finishes allows for creative fixture specification and design. Fixtures may be wall mounted with standard or custom wall arm (goosenecks). LED module and driver are serviceable for future replacement.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
LED system features Xicato LED module with proprietary phosphor technology that converts high brightness blue LEDs into uniform white light. Designed to provide consistent, stable color with CCT control of +/- 100K over life of the light engine. Base CRI is 82 with 90, 95 CRI and VividTM options. Variety of electronic 120v/277v and dimming drivers.
CONSTRUCTION
Fixture shades are spun in our factory from 0.063 high purity aluminum. Wall enclosures and fittings are die-cast aluminum with stainless steel hardware. Wall arms are formed 3/4 NPT aluminum pipe. Gaskets are machine cut neoprene.
CODE COMPLIANCE
ARRA Compliant. ETL listed for damp locations. Optional Wet location. Manufactured and built to UL standards No. 1598/8750.
- XT SDT 3" Dual Surface Tracklight 4000Lm
SDT3XT
APPLICATION
SDT 3" Dual Euro Series tracklight for accent, display lighting and general illumination.
- XT SARV 3" Tracklight 2000Lm
SARVXT
APPLICATION
SARV 3" Theatrical Pro Series Tracklight for accent, stage, studio and decorative lighting applications.
- XT SARH 3" Tracklight 3000Lm
SARHXT
APPLICATION
Theatrical Pro SARH Series Tracklight for accent display lighting and decorative lighting application.
- XT SARC 4" Surface Light 2000Lm
SARCXT
APPLICATION
SARC 4" Theatrical Pro Series surface light for accent, display and general illumination.
- XT LED Icon 8" Glass Pendant 3000 Lm Max
DP8LEDXT
APPLICATION
The Icon Pendant series features a classic glass shade for decorative area lighting.- XT LED Icon 2'x2' Recessed Decorative
SGV22LEDXT - TRIM FLANGE / NON-IC RATED
APPLICATION
SG22V features a shallow matte white reflector that glows gently from deco triplex glass cone. May be recessed in dry wall ceiling or used in 2' x 2' grid lay in applications.- XT LED 9" Round Downlight 5000Lm
SGE9LEDXT - TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 9" Round aperture recessed LED downlight with a wide range of lumens and optical controls.- XT LED 8"x96" Suspended / Surface 8x4000 Lumens
RCC896P1LEDXT, RCC896P2LEDXT,
RCC896P3LEDXT
APPLICATION
RCC 8" x 96" series modular fixture for suspended / surface accent lighting.- XT LED 8"x48" Suspended / Surface 4x4000 Lumens
RCC848P1LEDXT, RCC848P2LEDXT,
RCC848P3LEDXT, RCC848P4LEDXT
APPLICATION
RCC 8" x 48" series modular fixture for suspended / surface accent lighting.- XT LED 8"x24" Suspended / Surface 3x4000 Lumens
RCC824P1LEDXT, RCC824P2LEDXT,
RCC824P3LEDXT
APPLICATION
RCC 8" x 24" series modular fixture for suspended / surface accent lighting.- XT LED 8"x16" Suspended / Surface 2x4000 Lumens
RCC816P1LEDXT, RCC816P2LEDXT
APPLICATION
RCC 8" x 16" series modular fixture for suspended / surface accent lighting.- XT LED 8" Slope Ceiling Downlight
SGSC8LEDXT
APPLICATION
8" Round recessed slope ceiling downlight with optical control for high ceilings illumination in shopping malls, churches and commercial applications.- XT LED 8" Round Downlight 5000Lm
RDFO8LEDXT - TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 8" Round aperture recessed LED downlight with a wide range of lumens and optical controls.- XT LED 8" Round Adjustable 5000Lm
RAFO8LEDXT - TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 8" Round aperture recessed LED accent light with a wide range of lumens and optical controls. Tilts and locks to 35°. Rotates and locks 360°.- XT LED 8" Grid Ceiling / Trimless 9x5000 Lumens
RC896LEDXT, RC8120LEDXT, RC8144LEDXT,
RC8168LEDXT, RC8192LEDXT
APPLICATION
RC 8" series Continuous slot fixture for runs up to 16'. Designed for automotive and retail applications where crisp focused light and a finished ceiling design in desired.- XT LED 6"-8" Round Adjustable Accent Remodel
SGRTA6LEDXT, SGRTA7LEDXT, SGRTA8LEDXT
TRIM FLANGE / NON-IC RATED
APPLICATION
6" - 8" Round adjustable LED remodelight platform for focused downlighting.- XT LED 6" Suspended / Surface 4x2000 Lumens
RCC66LEDXT, RCC612LEDXT,
RCC618LEDXT, RCC624LEDXT
APPLICATION
RCC 6" series modular fixture for suspended/surface accent lighting.- XT LED 6" Square Wall Wash 5000Lm
SWFO6XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED wall wash with a wide range of lumens and control options.- XT LED 6" Square Trimless Wall Wash 2000Lm
SWZO6XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED wall wash with flangeless trim and a wide range of lumens and control options.- XT LED 6" Square Trimless Downlight 5000Lm
SDZO6XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED downlight with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Square Trimless Adjustable 5000Lm
SAZO6XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED accent light with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Square Illumitech Decorative Accent
SDFO6LEDXT - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative recessed series offers four suspended glass elements. These create visual focus and ceiling brightness while functioning as a performance downlight.- XT LED 6" Square IC Wall Wash 2000Lm
SWFI6XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED wall wash for Insulated Ceiling installations with a wide range of lumens and control options.- XT LED 6" Square IC Trimless Wall Wash 2000Lm
SWZI6XT
TRIMLESS / IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED wall wash for Insulated Ceiling installations with flangeless trim and a wide range of lumens and control options.- XT LED 6" Square IC Trimless Downlight 2000Lm
SDZI6XT
TRIMLESS / IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED downlight for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Square IC Trimless Adjustable 2000Lm
SAZI6XT
TRIMLESS / IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED accent light for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Square IC Illumitech Decorative Accent
SDFI6LEDXT - DECORATIVE TRIM / IC RATED
APPLICATION
Illumitech decorative recessed series offers four suspended glass elements. These create visual focus and ceiling brightness while functioning as a performance downlight.- XT LED 6" Square IC Downlight 2000Lm
SDFI6XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED downlight for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 6" Square IC Adjustable 2000Lm
SAFI6XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED accent light for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 6" Square Downlight 5000Lm
SDFO6XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED downlight with a wide range of lumens and optical controls.- XT LED 6" Square Adjustable 5000Lm
SAFO6XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 6" Square aperture recessed LED accent light with a wide range of lumens and optical controls.- XT LED 6" Slope Ceiling Downlight
SGSC6LEDXT
APPLICATION
6" Round recessed slope ceiling downlight with optical control for high ceilings illumination in shopping malls, churches and commercial applications.- XT LED 6" Round Wall Wash 5000Lm
RWFO6XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED wall wash with a wide range of lumens and control options.- XT LED 6" Round Trimless Wall Wash 5000Lm
RWZO6XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED wall wash with flangeless trim and a wide range of lumens and control options.- XT LED 6" Round Trimless Downlight 5000Lm
RDZO6XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED downlight with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Round Trimless Adjustable 5000Lm
RAZO6XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED accent light with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Round Spun Aluminum Trim Rings
RDFO6LEDXT - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED downlight with a wide range of lumens and optical controls. Three tier decorative ring trim adds visual appeal and ceiling brightness.- XT LED 6" Round Pull Down Retrofit
SGRTP6LEDXT - TRIM FLANGE / NON-IC RATED
APPLICATION
Retrofit Pull Down adjustable accent light for retail and spotlight applications. Converts 6" aperture fixtures in to high performance LED accent luminaires.- XT LED 6" Round IC Wall Wash 2000Lm
RWFI6XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED wall wash for Insulated Ceiling installations with a wide range of lumens and control options.- XT LED 6" Round IC Trimless Wall Wash 2000Lm
RWZI6XT
TRIMLESS / IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED wall wash for Insulated Ceiling installations with flangeless trim and a wide range of lumens and control options.- XT LED 6" Round IC Trimless Downlight 2000Lm
RDZI6XT
TRIMLESS / IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED downlight for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Round IC Trimless Adjustable 2000Lm
RAZI6XT
TRIMLESS / IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED accent light for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 6" Round IC Spun Aluminum Trim Rings
RDFI6LEDXT - DECORATIVE TRIM / IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED downlight for Insulated Ceiling installations with a wide range of lumens and optical controls. Three tier decorative ring trim adds visual appeal and ceiling brightness.- XT LED 6" Round IC Downlight 2000Lm
RDFI6XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED downlight for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 6" Round IC Adjustable 2000Lm
RAFI6XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED accent light for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 6" Round Downlight 5000Lm
RDFO6XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED downlight with a wide range of lumens and optical controls.- XT LED 6" Round Adjustable 5000Lm
RAFO6XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 6" Round aperture recessed LED accent light with a wide range of lumens and optical controls. Tilts and locks to 35°. Rotates and locks 360°.- XT LED 6" Regressed Razor 5000 Lumens
RC66NF4LEDXT, RC612NF4LEDXT,
RC618NF4LEDXT, RC624NF4LEDXT
REGRESSED RAZOR EDGE / NON-IC RATED
APPLICATION
RC series modular fixture for retail, residential and commercial accent lighting.- XT LED 6" Regressed Razor 2000 Lumens
RC66NF3LEDXT, RC612NF3LEDXT,
RC618NF3LEDXT, RC624NF3LEDXT
REGRESSED RAZOR EDGE / NON-IC RATED
APPLICATION
RC series modular fixture for retail, residential and commercial accent lighting.- XT LED 6" Regressed Beveled 5000 Lumens
RC66RT4LEDXT, RC612RT4LEDXT,
RC618RT4LEDXT, RC624RT4LEDXT
REGRESSED BEVELED FLANGED / NON-IC RATED
APPLICATION
RC series modular fixture for retail, residential and commercial accent lighting.- XT LED 6" Regressed Beveled 2000 Lumens
RC66RT3LEDXT, RC612RT3LEDXT,
RC618RT3LEDXT, RC624RT3LEDXT
REGRESSED BEVELED FLANGED / NON-IC RATED
APPLICATION
RC series modular fixture for retail, residential and commercial accent lighting.- XT LED 6" Illumitech Deco 5000Lm
RDFO6LEDXT
DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative recessed series offer two lengths of decorative acrylic cylinder (FACY). Cylinder glows softly to create ambiance.- XT LED 6" IC Illumitech Deco 2000Lm
RDFI6LEDXT
DECORATIVE TRIM / IC RATED
APPLICATION
Illumitech decorative recessed series offer two lengths of decorative acrylic cylinder (FACY). Cylinder glows softly to create ambiance.- XT LED 6" Flush Flat 5000 Lumens
RC66FT4LEDXT, RC612FT4LEDXT,
RC618FT4LEDXT, RC624FT4LEDXT
FLUSH FLAT FLANGED / NON-IC RATED
APPLICATION
RC series modular fixture for retail, residential and commercial accent lighting.- XT LED 6" Flush Flat 2000 Lumens
RC66FT3LEDXT, RC612FT3LEDXT,
RC618FT3LEDXT, RC624FT3LEDXT
FLUSH FLAT FLANGED / NON-IC RATED
APPLICATION
RC series modular fixture for retail, residential and commercial accent lighting.- XT LED 6" Biaxial Tilt Accent Light
SGM6LEDXT
APPLICATION
Biaxial Tilt adjustable accent light for retail, residential and commercial ceiling.- XT LED 5" Pull Down Accent Light
SGP5LEDXT - TRIM FLANGE / NON-IC RATED
APPLICATION
Pull Down adjustable accent light for retail, residential and commercial ceiling.- XT LED 5" Concrete Pour Wall Wash 2000Lm
CPW5LEDXT
APPLICATION
5" XT LED Wall Wash series intended for concrete pour applications.- XT LED 5" Concrete Pour Downlight 2000Lm
CPE5LEDXT
APPLICATION
5" XT LED downlight series intended for concrete pour applications.- XT LED 5" Concrete Pour Accent 2000Lm
CPA5LEDXT
APPLICATION
5" XT LED accent light series intended for concrete pour applications.- XT LED 4"-14" Round Remodel Platform 5000Lm
SGRTE4LEDXT, SGRTE5EDXT, SGRTE6LEDXT, SGRTE7LEDXT, SGRTE8LEDXT, SGRTE9LEDXT, SGRTE10LEDXT, SGRTE12LEDXT, SGRTE14LEDXT
TRIM FLANGE / NON-IC RATED
APPLICATION
Round XT focused illumination series LED downlight for high performance retrofit or remodel application.- XT LED 4" Square Wall Wash 4000Lm
SWFO4XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED wall wash with a wide range of lumens and control options.- XT LED 4" Square Trimless Wall Wash 4000Lm
SWZO4XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED wall wash with flangeless trim and a wide range of lumens and control options.- XT LED 4" Square Trimless Downlight 4000Lm
SDZO4XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED downlight with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Square Trimless Adjustable 4000Lm
SAZO4XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED accent light with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Square Remodel Platform
SGRTE4SQLEDXT - TRIM FLANGE / NON-IC RATED
APPLICATION
4" LED remodelight square open aperture platform for focused downlighting.- XT LED 4" Square Illumitech Decorative Accent
SDFO4LEDXT - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative recessed series offers four suspended glass elements. These create visual focus and ceiling brightness while functioning as a performance downlight.- XT LED 4" Square IC Wall Wash 2000Lm
SWFI4XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED wall wash for Insulated Ceiling installations with a wide range of lumens and control options.- XT LED 4" Square IC Trimless Wall Wash 2000Lm
SWZI4XT
TRIMLESS / IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED wall wash for Insulated Ceiling installations with flangeless trim and a wide range of lumens and control options.- XT LED 4" Square IC Trimless Downlight 2000Lm
SDZI4XT
TRIMLESS / IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED downlight for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Square IC Trimless Adjustable 2000Lm
SAZI4XT
TRIMLESS / IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED accent light for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Square IC Illumitech Decorative Accent
SDFI4LEDXT - DECORATIVE TRIM / IC RATED
APPLICATION
Illumitech decorative recessed series offers four suspended glass elements. These create visual focus and ceiling brightness while functioning as a performance downlight.- XT LED 4" Square IC Downlight 2000Lm
SDFI4XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED downlight for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 4" Square IC Adjustable 2000Lm
SAFI4XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED accent light for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 4" Square Downlight 4000Lm
SDFO4XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED downlight with a wide range of lumens and optical controls.- XT LED 4" Square Adjustable 4000Lm
SAFO4XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 4" Square aperture recessed LED accent light with a wide range of lumens and optical controls.- XT LED 4" Round Wall Wash 4000Lm
RWFO4XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED wall wash with a wide range of lumens and control options.- XT LED 4" Round Trimless Wall Wash 4000Lm
RWZO4XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED wall wash with flangeless trim and a wide range of lumens and control options.- XT LED 4" Round Trimless Downlight 4000Lm
RDZO4XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED downlight with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Round Trimless Adjustable 4000Lm
RAZO4XT
TRIMLESS / NON-IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED accent light with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Round IC Wall Wash 2000Lm
RWFI4XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED wall wash for Insulated Ceiling installations with a wide range of lumens and control options.- XT LED 4" Round IC Trimless Wall Wash 2000Lm
RWZI4XT
TRIMLESS / IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED wall wash for Insulated Ceiling installations with flangeless trim and a wide range of lumens and control options.- XT LED 4" Round IC Trimless Downlight 2000Lm
RDZI4XT
TRIMLESS / IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED downlight for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Round IC Trimless Adjustable 2000Lm
RAZI4XT
TRIMLESS / IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED accent light for Insulated Ceiling installations with flangeless trim and a wide range of lumens and optical controls.- XT LED 4" Round IC Downlight 2000Lm
RDFI4XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED downlight for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 4" Round IC Adjustable 2000Lm
RAFI4XT
TRIM FLANGE / IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED accent light for Insulated Ceiling installations with a wide range of lumens and optical controls.- XT LED 4" Round Downlight 4000Lm
RDFO4XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED downlight with a wide range of lumens and optical controls.- XT LED 4" Illumitech Deco 4000Lm
RDFO4LEDXT
DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative recessed series offer two lengths of decorative acrylic cylinder (FACY). Cylinder glows softly to create ambiance.- XT LED 4" IC Illumitech Deco 2000Lm
RDFI4LEDXT
DECORATIVE TRIM / IC RATED
APPLICATION
Illumitech decorative recessed series offer two lengths of decorative acrylic cylinder (FACY). Cylinder glows softly to create ambiance.- XT LED 2'x2' Grid Ceiling 4x5000 Lumens
GC24244XLEDXT
FLUSH TRIM / NON-IC RATED
APPLICATION
GC 2' x 2' Series LED XT accent light designed for automotive and retail applications where crisp focused light is desired.- XT LED 2'x2' Grid Ceiling 2x5000 Lumens
GC24242XLEDXT
FLUSH TRIM / NON-IC RATED
APPLICATION
GC 2' x 2' Series LED XT accent light designed for automotive and retail applications where crisp focused light is desired.- XT LED 2'x2' Grid Ceiling 1x5000 Lumens
GC24241XLEDXT
FLUSH TRIM / NON-IC RATED
APPLICATION
GC 2' x 2' Series LED XT accent light designed for automotive and retail applications where crisp focused light is desired.- XT LED 12"x12" Flush Flat 4x4000 Lumens
RC1212FTLEDXT
FLUSH FLAT FLANGED / NON-IC RATED
APPLICATION
RC series modular fixture for retail, residential and commercial accent lighting.- XT Icon 8" Aluminum Pendant 3000Lm
AP8LEDXT
APPLICATION
The Icon Pendant series features a classic curved hand spun aluminum shade for decorative area lighting.- XT Icon 12" Glass Pendant 3000Lm
DP12LEDXT
APPLICATION
The Icon Pendant series features a classic curved molded glass shade for decorative area lighting.
FEATURES
Speclume series fixtures offer contemporary style with functional luminaire performance. Separate finishes may be chosen for fixture and mounting. Interchangeable LED module for ease of maintenance. Electronic LED Driver in canopy for thermal management. A variety of mounting and finish options available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
LED system features Xicato LED module with proprietary phosphor technology that provides consistent stable color with CCT control of +/- 100K over life of the light engine. Base CRI is 83 with 1 x 2 MacAdam Ellipses binning. High CRI is 98 with 1 x 2 MacAdam Ellipses binning. Variety of electronic 120v/277v and dimming drivers.
CONSTRUCTION
Glass is molded blown white cased inside and soft etched outside for even glare free illumination. Passive extruded aluminum heatsink for optimal thermal management.
CODE COMPLIANCE
ARRA Compliant. ETL listed for damp locations. Manufactured and tested to UL standard No. 1598/8750.- XT Icon 12" Aluminum Pendant 3000Lm
AP12LEDXT
APPLICATION
The Icon Pendant series features a classic curved hand spun aluminum for decorative area lighting.
- XT GTA Surface Mount 12" Glass Pendant 3000Lm
GTA1219LEDXT
The GTA 12" Pendant series features a classic curved molded glass shade with laser formed accent rings for decorative area lighting.
- XT GTA Cable Mount 12" Glass Pendant 3000Lm
GTA1219LEDXT
The GTA 12" Pendant series features a classic curved molded glass shade with laser formed accent rings for decorative area lighting.
- XT Glass Reflector Pendant 4000Lm
GPEXT1014LEDXT, GPEXT1214LEDXT
APPLICATION
The Glass Reflector Pendant’s distinctive styling will enhance any space with efficient lighting and a bold design.- XT Glass Reflector Pendant 3000Lm
GP1014LEDXT, GP1214LEDXT
APPLICATION
Reflector Pendant’s distinctive styling will enhance any space with efficient lighting and modern design.
- XT Glass Reflector Pendant 1300Lm
GPEXT67LEDXT
APPLICATION
The Glass Reflector Pendant’s distinctive styling will enhance any space with efficient lighting and a striking design.
- XT Aluminum Reflector Pendant 4000Lm
RPEXT1014LEDXT, RPEXT1214LEDXT
APPLICATION
The Aluminum Reflector Pendant’s distinctive styling will enhance any space with efficient lighting and striking design.
- XT Aluminum Reflector Pendant 3000Lm
RP1014LEDXT, RP1214LEDXT
APPLICATION
The Reflector Pendant features distinctive styling that will enhance any space with efficient lighting and modern design.
FEATURES
Speclume series fixtures offer contemporary style with functional luminaire performance. Separate finishes may be chosen for fixture and mounting. Interchangeable LED module for ease of maintenance. Electronic LED Driver in canopy for thermal management. A variety of mounting and finish options available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion. Specify inside and outside finish. Matte white interior is standard.
ELECTRONICS
LED system features Xicato LED module with proprietary phosphor technology that provides consistent stable color with CCT control of +/- 100K over life of the light engine. Base CRI is 83 with 1 x 2 MacAdam Ellipses binning. High CRI is 98 with 1 x 2 MacAdam Ellipses binning. Variety of electronic 120V/277V and dimming drivers.
CONSTRUCTION
Fixtures are spun in our factory from 0.063 high purity aluminum. Passive extruded aluminum heatsink for optimal thermal management.
CODE COMPLIANCE
ARRA Compliant. ETL listed for damp locations. Manufactured and tested to UL standard No. 1598/8750.- XT Aluminum Deco-Reflector Pendant 4000Lm
RPEXT1014LEDXT, RPEXT1214LEDXT
APPLICATION
The Aluminum Reflector Pendant’s distinctive styling will enhance any space with efficient lighting and striking design. Deco series offers suspended glass and metal tier options.
- XT Aluminum Deco-Reflector Pendant 3000Lm
RP1014LEDXT, RP1214LEDXT
APPLICATION
Reflector Pendant’s distinctive styling will enhance any space with efficient lighting and striking design. The Deco-Reflector features suspended glass and metal tier options.
- XT 8" Square Direct 3000Lm
SPC0812SQLEDXT, SPC0816SQLEDXT
APPLICATION
8" Square LED x 12" or 16" High XT Series Cylinder Luminaire for accent and general illumination.
- XT 8" Round Pro Adjustable Cylinder 3000Lm
SPC0812YKLEDXT
APPLICATION
8" Round x 12" High LED Cylinder Luminaire with adjustable / lockable yoke for aiming and adjustment.
- XT 8" Round Direct Cylinder w/ EM Battery 3000Lm
SPC0817LEDXT
This product has been discontinued.
For comparable fixtures see SPC0812LEDXT.
APPLICATION
8" Round x 17" High LED Cylinder Luminaire for accent and general illumination. This series offers Integral EM Battery.- XT 8" Round Direct 3000Lm
SPC0812LEDXT, SPC0818LEDXT
APPLICATION
8" Round x 12" or 18" High LED Cylinder Luminaire for accent and general illumination.
- XT 8" Round Direct 3000Lm
SPC0824DLEDXT
APPLICATION
8" Round x 24" High LED XT Series Cylinder Luminaire for accent and general illumination.
- XT 8" Round Direct / Indirect 2 x 2000Lm
C0824UDXT
PENDANT MOUNT
APPLICATION
8" round x 24" high mini cylinder luminaire for direct / indirect illumination.- XT 8" Round Accent 3000Lm
SPC0808LEDXT
APPLICATION
8” Round x 8" High LED Cylinder Luminaire for accent, decorative and general illumination. Unique biaxial trim adjustable for accent lighting.
- XT 8" Direct / Indirect 2 x 2000Lm
SPC0824UDLEDXT
APPLICATION
8” Round x 24” High Direct / Indirect LED XT Series Cylinder Luminaire for accent and general illumination.
- XT 8" Direct / Indirect - Uplight Adjustable 2 x 2000Lm
SPC0816ADJULEDXT
APPLICATION
8" Round x 16" High XT Series Aluminum Direct / Indirect Cylinder Luminaire with adjustable tilt indirect (uplight) component.
- XT 8" Direct / Indirect - Up / Down Adjustable 2 X 2000Lm
SPC0816ADJUDLEDXT
APPLICATION
8" Round x 16" High XT Series Aluminum Direct / Indirect Cylinder Luminaire with adjustable tilt direct (down) and indirect (uplight) component.
- XT 8" Cylinder Pendant Trio 6 x 2000Lm
SPC3X0824UDLEDXT
APPLICATION
Cloister pendant for direct indirect lighting. LED XT Series Cylinder Luminaire.
- XT 6" Square Direct 3000Lm
SPC0611SQLEDXT
APPLICATION
6" Square x 11" High LED XT Series Cylinder Luminaire for accent and general illumination.
- XT 6" Round Uplight / Indirect Cylinder 2000Lm
SPC0618ULEDXT, SPC0624ULEDXT
APPLICATION
6" Round x 18" or 24" High Indirect Uplight LED XT Series Cylinder Luminaire for accent and general illumination.
- XT 6" Round Pendant Trio 6 x 2000Lm
SPC3X0618UDLEDXT
APPLICATION
6" Cylinder Pendant Trio for direct / indirect lighting.
- XT 6" Round Direct 5000Lm
SPC0612LEDXT
APPLICATION
6" Round x 12" High LED Cylinder Luminaire designed for high output focused illumination.
- XT 6" Round Direct 3000Lm
SPC0611LEDXT, SPC0618LEDXT, SPC0624LEDXT
APPLICATION
6" Round x 11", 18" or 24" High LED Cylinder Luminaire for accent and general illumination.
- XT 6" Round Direct / Indirect 2 x 2000Lm
SPC0618UDLEDXT, SPC0624UDLEDXT
APPLICATION
6" Round x 18" or 24" High Direct / Indirect LED XT Series Cylinder Luminaire for accent and general illumination.
- XT 6" Round Direct / Indirect 2 x 2000Lm
C0618UDXT
PENDANT MOUNT
APPLICATION
6" round x 18" high mini cylinder luminaire for direct / indirect illumination.- XT 6" Direct / Indirect 2 x 2000Lm
SPC0618SQUDLEDXT, SPC0624SQUDLEDXT
APPLICATION
6" Square x 18” or 24” High Direct/Indirect LED XT Series Cylinder Luminaire for accent and general illumination.- XT 6" Deco Direct / Indirect 2 x 2000Lm
SPC0618DECORUDLEDXT
APPLICATION
6” Round x 18” Decorative Direct / Indirect LED XT Series Cylinder Luminaire for accent and general illumination.
- XT 4" Square Direct 3000Lm
SPC0412SQLEDXT
APPLICATION
4" Square x 12" High Cylinder Luminaire designed for high output focused illumination.
- XT 4" Square Direct 1000Lm
SPC0405SQLEDXT
APPLICATION
4" Square x 5" High Cylinder Luminaire designed for focused illumination.
- XT 4" Round Direct 5000Lm
SPC0412LEDXT
APPLICATION
4" Round x 12" High Cylinder Luminaire designed for high output focused illumination.
- XT 4" Round Direct 2000Lm
SPC0411LEDXT
APPLICATION
4" Round x 11" High Cylinder Luminaire designed for high output focused illumination.
- XT 4" Round Direct 1000Lm
SPC0405LEDXT
APPLICATION
4" Round x 5" High Cylinder Luminaire designed for high output focused illumination.
- XT 4" Round Direct / Indirect 2 x 1000Lm
C0411UDXT
PENDANT MOUNT
APPLICATION
4" round x 11" high mini cylinder luminaire for direct / indirect illumination.- XT 4" Round Adjustable 4000Lm
RAFO4XT
TRIM FLANGE / NON-IC RATED
APPLICATION
Versatile 4" Round aperture recessed LED accent light with a wide range of lumens and optical controls.- XT 4" Hoboken Pendant 1300Lm
CY0405DXT
APPLICATION
Hoboken Pendant features a clean design for a variety of architectural area lighting applications.- XT 3" Square Decorative 1300Lm
DC0312SQXT, DC0318SQXT, DC0324SQXT
PENDANT MOUNT
APPLICATION
3" square x 12", 18" or 24" high decorative cylinder offers a minimalist design for accent and general illumination.- XT 3" Square Accent 1000Lm
SPC0306SQLEDXT
APPLICATION
3" Square x 4.60" High Mini LED Cylinder Luminaire for accent and general illumination.
- XT 3" Round Indirect 1000 Lm
SPC0310ULEDXT
APPLICATION
3" Round x 10" High LED XT Series Indirect Uplight LED Cylinder Luminaire.
- XT 3" Round Direct 1000Lm
SPC0310LEDXT
APPLICATION
3" Round x 10" High Mini LED Cylinder Luminaire for accent and general illumination.
- XT 3" Round Direct 1000Lm
SPC0310DLEDXT
APPLICATION
3” Round LED XT Series Downlight LED Cylinder Luminaire.
- XT 3" Round Direct 1000Lm
SPC0310DLEDXT
APPLICATION
3" Round x 10" High Mini LED Cylinder Luminaire for direct illumination.
- XT 3" Round Direct / Indirect 2 x 1000Lm
SPC0310UDLEDXT
APPLICATION
3" Round x 10" High Direct / Indirect Wall Luminaire for accent, area and ambient lighting applications.
- XT 3" Round Direct / Indirect 2 x 1000Lm
C0310UDXT
PENDANT MOUNT
APPLICATION
3" round x 10" high mini cylinder luminaire for direct / indirect illumination.- XT 3" Round Decorative 1300Lm
DC0312XT, DC0318XT, DC0324XT
PENDANT MOUNT
APPLICATION
3" round x 12", 18" or 24" high decorative cylinder offers a minimalist design for accent and general illumination.- XT 3" Round Cylinder with EM 1000Lm
SPC0310DLEDXT
APPLICATION
3" Round x 10" High Mini LED Cylinder Luminaire for accent and general illumination. Integral EM battery in canopy for emergency illumination applications.
- XT 3" Round Accent 1000Lm
SPC0306LEDXT
APPLICATION
3" Round x 4" High Mini LED Cylinder Luminaire for accent and general illumination.
- XT 13" Round Pro Adjustable With Straight Snoot 20000Lm
SPCYKSS1320LEDXT
APPLICATION
13" Round x 20" High XT Series Pro Pendant for auditorium and area lighting. Features integral straight 3" deep snoot for additional cutoff.
- XT 13" Round Pro Adjustable With Flared Snoot 20000Lm
SPCYKTS1320LEDXT
APPLICATION
13" Round x 20" High XT Series Pro Pendant for auditorium and area lighting. Features integral flared 3" deep snoot for additional cutoff.
- XT 13" Round Pro Adjustable 20000Lm
SPCYK1320LEDXT
APPLICATION
13" Round x 20" High XT Series Pro Pendant for auditorium and area lighting.- XT 13" Round Direct 20000Lm
SPC1320LEDXT
APPLICATION
13" Round x 20" High XT Series Pro Luminaire for auditorium and area lighting.
- XT 13" Round Direct 20000Lm
SPC1320LEDXT
APPLICATION
13" Round x 20" High XT Series Pro Luminaire for auditorium and area lighting.
- XT 12" Round Direct 3000Lm
SPC1210LEDXT
APPLICATION
12" Round LED x 10" High LED XT Cylinder Series for general illumination with optional Integral Emergency Battery.
- XT 12" Round Accent Cylinder 5000Lm
SPC1216LEDXT
APPLICATION
12" Round x 16" High LED Cylinder Luminaire for accent, decorative and general illumination. Unique biaxial trim adjustable for accent lighting.
- XT 12" Layer Glass Pendant 3000Lm
LG1212LEDXT
12" Layered Glass Pendant series features a classic curved molded glass shade for decorative area lighting.
- XM 2.5" Series Tracklight 1300Lm
STT25XM
APPLICATIONS
2.5" Round Style STT track light for accent, display and general illumination.- XL Ambient Indirect Surface RDC5 Sconce 2000Lm
ID406LEDXL - RDC5
APPLICATION
Ambient Series Sconce for indirect lighting illumination. Modern replacement for classic halogen fixture.
- XL Ambient Indirect Sconce 2000Lm
ID406LEDXL
APPLICATION
Ambient Series Sconce for indirect lighting illumination. Modern replacement for classic halogen fixture.
- XL 6" Square Forward Throw 3000Lm
SPC0612SQFTLEDXL
APPLICATION
6" Square LED XL series cylinder with forward throw optic (peak candela at 50° above nadir.) Ideal for wall, stairwell, and pathway illumination.
- XL 6" Square Forward Throw 3000Lm
SPC0612SQFTLEDXL
APPLICATION
6" Square LED XL series cylinder with forward throw optic (peak candela at 50° above nadir.) May be pendant or surface mounted. Ideal for wall, stairwell, and pathway illumination.
- XL Ambient Indirect Surface SDC5 Sconce 2000Lm
ID406LEDXL - SDC5
APPLICATION
Ambient Series Sconce for indirect lighting illumination. Modern replacement for classic halogen fixture.
- VCF 9" Round Open Wall Wash
SGW9V
APPLICATION
9” aperture series features a deep reflector for excellent cutoff & even wall wash.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 9" Round Open Downlight
SG9V
APPLICATION
SG9V features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 9" Round Open Downlight
• 9” vertical lamp compact fluorescent.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 9" Round Lens Downlight
SG9V
APPLICATION
SG9V features a wide variety of lenses and splays.
FEATURES
Intended for Non-IC new construction.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 8" Round Open Wall Wash
SGW8V
APPLICATION
8” aperture series features a deep reflector for excellent cutoff & even wall wash.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 8" Round Open Wall Wash
• 8” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 8" Round Open Downlight
SG8V
APPLICATION
8” aperture series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 8" Round Open Downlight
• 8” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 8" Round Lens Wall Wash
SGL8V
APPLICATION
8” aperture series spread lens wall wash produces even wall illumination.
FEATURES
Intended for Non-IC new construction.
For IC applications, consult factory.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 8" Round Lens Downlight
SG8V
APPLICATION
8” aperture series features a wide variety of lenses and splays.
FEATURES
Intended for Non-IC new construction.
For IC applications, consult factory.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 8" Round Lens Downlight
• 8” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 8" Round Lens Adjustable
SGA8V
APPLICATION
SGA8V features a 30° adjustment from vertical with a 359° axial rotation.
FEATURES
Intended for Non-IC new construction.
For IC applications, consult factory.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 8" Round Dual Optic
SGD8V
APPLICATION
Features secondary reflector cone for optimum cutoff.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Fluorescent ballasts shall be integrally mounted, electronic
sound rated “A”, Class P, multi-volt 120v – 277v.
CONSTRUCTION
Housing constructed of 20 ga. aluminum.
Reflectors formed from .063 high purity aluminum & finished to
specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.- VCF 8" Round Cross Baffle
SG8V
APPLICATION
8” series offers deep reflector combined with four-cell cross baffle for excellent cutoff.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 8" Hand Blown Glass Cone
SGS8V/AR8312
APPLICATION
SGS8V features a shallow matte white dome that reflects light from a
decorative triplex glass cone. Hand-blown triplex glass cone available in white, orange, blue, and red.- VCF 8" Cast Acrylic Element
• 1FA1.25 offers a solid cast acrylic element with multiple trim finishes.
- VCF 7" Round Shower Light
• 6 1/2” (7”) vertical lamp compact fluorescent.
• Available lensed.
• Acrylic (Plastic) trim face and lens.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 7" Round Shallow Open
SGN7V
APPLICATION
7” aperture shallow series features a medium cutoff for wide general lighting.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 7" Round Shallow Open
SPS7VF/7150, SPS7VF/7159
• 6 1/2” (7”) shallow vertical lamp compact fluorescent.
• Available open and lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 7" Round Shallow Lens
SGN7V
APPLICATION
7” aperture series features a wide variety of lenses and splays.
FEATURES
Intended for Non-IC new construction.
For IC applications, consult factory.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 7" Round Open Wall Wash
SGW7V
APPLICATION
7” aperture open wall wash series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 7" Round Open Wall Wash
• 6 1/2” (7”) vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 7" Round Open Downlight
SG7V
APPLICATION
7” aperture open downlight series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 7" Round Open Downlight
• 6 1/2” (7”) vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 7" Round Lens Downlight
SG7V
APPLICATION
7” aperture lensed downlight series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 7" Round Lens Downlight
• 6 1/2” (7”) vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 7" Round Lens Downlight
• 6 1/2” (7”) vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 7" Dual Optic Downlight
SGD7V
APPLICATION
Features secondary reflector cone for optimum cutoff.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Fluorescent ballasts shall be integrally mounted, electronic
sound rated “A”, Class P, multi-volt 120v – 277v.
CONSTRUCTION
Housing constructed of 20 ga. aluminum.
Reflectors formed from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.- VCF 6" Square Open Downlight
SG6VSQ
APPLICATION
6” square vertical downlight series for compact fluorescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Fluorescent ballasts shall be integrally mounted, electronic
sound rated “A”, Class P, multi-volt 120v – 277v.
CONSTRUCTION
Housing constructed of 20 ga. aluminum.
Reflectors formed from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.- VCF 6" Square Open Downlight
• EFEX² Series CF Square trimless aperture.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Fluorescent ballasts shall be integrally mounted.
• Electronic sound rated “A”, Class P, multi-volt 120v – 277v.
• UL Listed for Damp Locations.- VCF 6" Round Trimless Downlight
APPLICATIONS
• 6”round trimless aperture downlight.
FEATURES
• For Non-IC new construction.
FINISH
• Standard housing is natural finish.
• Optional (EB) eco black powdercoat
CONSTRUCTION
• Housing constructed of 20 ga. CRS.
• Reflectors high purity .063 spun aluminum.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, Class P, multi-volt 120v – 277v.
• Dimming available.
LABELS
• Damp location rated. Wet location optional.
• Energy Star* rated.
• UL/ CUL listed, (File No. 1598).- VCF 6" Round Open Wall Wash
SGW6V
APPLICATION
6” aperture open wall wash series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 6" Round Open Wall Wash
• 6” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 6" Round Open Wall Wash
• 6” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 6" Round Open Downlight
SG6V
APPLICATION
6” aperture open downlight series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 6" Round Open Downlight
• 6” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 6" Round Open Downlight
• 6” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 6" Round Multi Faceted
SG6V/AR6416
APPLICATION
6” aperture series with multi-faceted reflector for distinct look.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 6" Round Lens Downlight
SG6V
APPLICATION
6” aperture lensed downlight series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 6" Round Lens Downlight
• 6” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 6" Round Lens Downlight
• 6” vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 6" Round IC Rated Open
SP6000FICAT/6610
• Insulated Ceiling/ Air Tight 6” downlight.
- VCF 6" Round IC Rated Open
• Clear Alzak reflector, white flange. (standard)
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277v standard.
• Suitable for use in damp location.
• UL listed.- VCF 5" Round Open Wall Wash
• Small aperture series with medium cutoff and even wall wash.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. galvanized steel.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, Class P, multi-volt 120v – 277v.
• UL Listed for Damp Locations.- VCF 5" Round Open Wall Wash
• 5” shallow vertical lamp compact fluorescent.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 5" Round Open Downlight
APPLICATION
5” aperture open downlight series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 5" Round Open Downlight
• 5” deep vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 5" Round Open Downlight
• 5” shallow vertical lamp compact fluorescent.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 5" Round Open Downlight
• 5” shallow vertical lamp compact fluorescent.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No.1598.- VCF 5" Round Lens Downlight
SG5V
APPLICATION
5” aperture lensed downlight series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 5" Round Lens Downlight
• 5” deep vertical lamp compact fluorescent.
• Available open, lensed, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 5" Round Lens Downlight
• 5” shallow vertical lamp compact fluorescent.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 5" Round FAPY Decorative
SG5V
APPLICATION
Flared acrylic or glass deco collar.
Open reflector allows full fixture performance.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 4"x8" Lens Wall Wash
APPLICATION
4” x 8” aperture vertical spread lensed wall wash series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Housing constructed of 20 ga. aluminum.
Reflectors formed from .050 high purity aluminum & finished to
specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.- VCF 4" Square Trimless Downlight
• EFEX² Series CF trimless recessed square.
• Serene ceiling features trimless fitter (PZ) for true trimless installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. galvanized steel.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, Class P, multi-volt 120v – 277v.
• Upper reflector is high purity specular aluminum.
• Manufactured and tested to UL standard No. 1598.- VCF 4" Sq. Open / Lens Downlight
SG4VSQ
APPLICATION
4” Square vertical downlight series for compact fluorescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Housing constructed of 20 ga. steel.
Reflectors formed from .050 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.- VCF 4" Round Wall Wash
SGW5V
APPLICATION
5” aperture open wall wash series for Compact Fluorescent lamps.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 4" Round Open Wall Wash
• 4” vertical lamp compact fluorescent series.
• Available open and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• UL listed to standard No.1598.- VCF 4" Round Open Wall Wash
SGW4V
APPLICATION
Small aperture series with medium cutoff and even wall wash.- VCF 4" Round Open Downlight
SG4V
APPLICATION
Small aperture series with deep cutoff.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 4" Round Open Downlight
SGS4V
APPLICATION
Small aperture super shallow vertical lamp series.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 4" Round Open Downlight
• 4” vertical lamp compact fluorescent series.
• Available open and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• UL listed to standard No.1598.- VCF 4" Round Open Downlight
• 4” shallow vertical lamp compact fluorescent.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• UL listed to standard No. 1598.- VCF 4" Round Lens Downlight
• 4" vertical lamp compact fluorescent series.
• Available open and wall wash.
• 20 gauge galvanized steel frame.
• 12" bar hangers expandable to 24" standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120v / 277v standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• UL listed to standard No.1598.- VCF 3" Round Open Downlight
SG3V
APPLICATION
Small aperture series with medium cutoff.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL Listed for Damp Locations.- VCF 12" Round Open Downlight
SG12V
APPLICATION
SG12V features a deep reflector for excellent cutoff.
FEATURES
Intended for Non-IC new construction.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Fluorescent ballasts shall be integrally mounted, electronic sound
rated “A”, Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL Listed for Damp Locations.- VCF 12" Round Open Downlight
• 12” vertical lamp compact fluorescent.
• Available open and lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option
• UL listed to standard No. 1598.- VCF 12" Round Lens Wall Wash
SGL12V
APPLICATION
12” aperture series spread lens wall wash produces even wall illumination.
FEATURES
Intended for Non-IC new construction.
For IC applications, consult factory.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Upper reflector fi nish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 12" Round Lens Downlight
SG12V
APPLICATION
SG12V features a deep reflector with a wide variety of lenses and splays.
FEATURES
Intended for Non-IC new construction.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Fluorescent ballasts shall be integrally mounted, electronic sound
rated “A”, Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 12" Round Lens Downlight
• 12” vertical lamp compact fluorescent.
• Available open and lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 10" Round Slope / Downlight
SG10V
APPLICATION
SG10V with three vertical compact fluorescent lamps, up to 57 watts.
Twist Lok sockets allow easy replacement.
Order SPECTRUM “Light Saber” to change lamps from floor level.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 10" Round Open Downlight
SG10V
APPLICATION
SG10V features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 10" Round Open Downlight
SG10V
APPLICATION
SG10V with three vertical compact fluorescent lamps, up to 57 watts.
Twist Lok sockets allow easy replacement.
Order SPECTRUM “Light Saber” to change lamps from floor level.
FEATURES
Efficient reflector design optimized for CFL lamps.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL 1598.
UL/ ETL Listed for Damp Locations.- VCF 10" Round Open Downlight
• 10” vertical lamp compact fluorescent.
• Available open and lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- VCF 10" Round Lens Wall Wash
SGL10V
APPLICATION
10” aperture series spread lens wall wash produces even wall illumination.
FEATURES
Intended for Non-IC new construction.
For IC applications, consult factory.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 10" Round Lens Downlight
SG10V
APPLICATION
SG10V features a deep reflector with a variety of lenses and splays.
FEATURES
Intended for Non-IC new construction.
Tool-less ballast access.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Fluorescent ballasts shall be integrally mounted, electronic sound
rated “A”, Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Upper reflector finish to match specified trim/ finish.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- VCF 10" Round Lens Downlight
• 10” vertical lamp compact fluorescent.
• Available open and lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- Twin Hi-Bay Mounting Bar
LMX2BKT
Shown with PREXT16LEDGV. Will work with any Spectrum Lumenmax Hi-Bay from 12" to 22".- Turbo Louver w/ Extended Center Cone
• Turbo Louver for 9” series downlight.
- Tier Concave Metal Ring
SG9V142EX/AR9115
• 3 CCMR offers concave metal rings in a finished to be specified.- Suspended Translucent Bowl w/ Metal Ring
• Faux Alabaster bowl with spun aluminum decorative metal ring.
• White Acrylic bowl with spun aluminum decorative metal ring.
• Choose 16”, 18” or 24” diameter open bowl.
• Formed of faux alabaster or white acrylic.
• Bowl suspended using adjustable cable fittings.- Stepped Rings
• STR offers a wet location rated semirecessed trim.
• Four lens options available.
• Tamper Proof option.
• Heavy gauge aluminum construction.
• Wet location available.- Spun Aluminum Trim Rings
• 3TMR offers 1, 2 or 3 metal rings in four finishes to be specified.
- Spun Aluminum & Acrylic
• 3TMR GRILL.
• 1 Open tier.
• 1 Perforated tier.
• 1 Tier with spiral laser formed “Grill”.- SGB8SQLEDGV 8" Square LED Open
SGB8SQLEDGV - TRIM FLANGE / NON-IC RATED
APPLICATION
8" Square aperture recessed LED with deep cutoff for general illumination.- SBT699 Tracklight 600Lm
SBT699
APPLICATIONS
Basix Series LED Track head for accent and display lighting.
- SBT609XL Tracklight 1500Lm
SBT609XL
APPLICATIONS
Basix Series LED Track head for accent and display lighting.
- SBT609S Tracklight 800Lm
SBT609S
APPLICATIONS
Basix Series LED Track head for accent and display lighting.
- SBT311 Tracklight 600Lm
SBT311
APPLICATIONS
Basix Series LED Track head for accent and display lighting.
- SBT120 Tracklight 1500Lm
SBT120
APPLICATIONS
Basix Series LED Track head for accent and display lighting.
- Round Opalescent Glass Trim
• AR42FG features an arcitectural opalescent glass trim for soft illumination.
• Wet location available.- Round In Wall / Step Light
STPK
APPLICATION
Round In wall / steplight series series for walkway safety, decorative accent and other footpath type lighting.
FEATURES
Fixtures offer contemporary style with functional luminaire performance. Low profile emitter modules fit within standard junction box and are designed to support cover plate. Steplight module may be ordered separately.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Features high brightness white LED’s. Produces 150 lumens at 3 watts. Available in 30K°, and 40 K°. Integral electronic dual voltage drivers. (120v/277v).
CONSTRUCTION
Housing is one-piece thermoformed all-weather polymer. Cover is die-cast aluminum, and finished to specification.
CODE COMPLIANCE
ETL listed for wet location. Manufactured and tested to UL standards No. 1598/8750.- Radial Bezel Louver
• RDFG Series offers a decorative Radial-Trim pattern w matching frosted glass.
• Frosted or clear glass available.
• Six standard finishes.- Polished Spun Aluminum Tier
• 1TMR is designed for our 4” series.
- Pendant / Surface Semi-Direct
EV04IND24OL, EV04IND48OL
APPLICATION
Evenlight is a 4" wide linear pendant, wall or surface mount for semi-direct illumination.- Pendant / Surface Semi-Direct
GL04IND48LX, GL04IND96LX
APPLICATION
Milltown is a 4" wide linear pendant or surface mount for semi-direct illumination.- Paracube Bezel Louver
• Unique decorative solution for reducing glare and providing visual details.
• Three main finishes available.- OS Sport Bay 29000Lm
LM1430OS
APPLICATION
Sport-Bay fixture designed for 20' + mounting heights. Can be used as downlight or floodlight. For use in gymnasiums, high ceilings and area lighting.- OS Sport Bay 18000Lm
LM1420OS
APPLICATION
Sport-Bay fixture designed for 20' + mounting heights. Can be used as downlight or floodlight. For use in gymnasiums, high ceilings and area lighting.- OS MRI LED 6" Square Downlight 2000Lm
SGE6SQMRILEDOS
TRIM FLANGE / IC RATED
APPLICATION
Square OS series LED downlight designed for general illumination. Non-ferrous construction for MRI-Compatible operation.- OS MRI LED 6" Round Downlight 2000Lm
SGE6MRILEDOS
TRIM FLANGE / IC RATED
APPLICATION
Round OS series LED downlight designed for general illumination. Non-ferrous construction for MRI-Compatible operation.- OS LED Square 6" Illumitech Deco Accent 4500Lm
SGE6SQLEDOS - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative accent LED series creates ceiling brightness and visual interest while delivering performance illumination.- OS LED Square 4"/6" Geo Metrics Deco Accent 4500Lm
SGE4SQLEDOS,SGE6SQLEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
Geo-Metrics decorative accent LED series. These create visual focus and ceiling brightness while functioning as a performance downlight.- OS LED Square 4" Illumitech Deco Accent 4500Lm
SGE4SQLEDOS - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative accent LED series creates ceiling brightness and visual interest while delivering performance illumination.- OS LED Round 8" Illumitech Deco Accent 4500Lm
SGE8LEDOS
APPLICATION
Illumitech decorative accent LED series creates ceiling brightness and visual interest while delivering performance illumination.- OS LED Round 8" 3 Tiers Ring Trim 4500Lm
SGE8LEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
8" LED Recessed open aperture downlight for general downlighting.- OS LED Round 6" Illumitech Deco Accent 4500Lm
SGE6LEDOS - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative accent LED series creates ceiling brightness and visual interest while delivering performance illumination.- OS LED Round 6" Illumitech Deco Accent 4500Lm
SGE6LEDOS - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative accent LED series creates ceiling brightness and visual interest while delivering performance illumination.- OS LED Round 6" 3 Tiers Ring Trim 4500Lm
SGE6LEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
6" LED Recessed open aperture downlight for general downlighting. Three tier decorative ring trim adds visual appeal and ceiling brightness.- OS LED Round 5" Illumitech Deco Accent 4500Lm
SGE5LEDOS - DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative accent LED series creates ceiling brightness and visual interest while delivering performance illumination.- OS LED Round 4"/6" Geo Metrics Deco Accent 4500Lm
SGE4LEDOS,SGE6LEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
Geo-Metrics decorative accent LED series. These create visual focus and ceiling brightness while functioning as a perfomance downlight.- OS LED Round 4" Illumitech Deco Accent 4500Lm
SGE4LEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
Illumitech decorative accent LED series creates ceiling brightness and visual interest while delivering performance illumination.- OS LED Prismatic 22" DDH Hi-Bay 99W Max
PRDDH22LEDOS
APPLICATION
Lumen Max Series Performance Pendant for low, mid-bay and hi-bay applications. Prismatic refractor promotes horizontal and vertical distribution.
FEATURES
Delivers a range of 7000-9000 lumens. Two-stage optical system for smooth light distribution. Zhaga LED module for ease of maintenance and replacement. Easy LED module, driver, and wiring access. Posi-lock reflector retention ring will absorb shocks and impact. Optional safety cable. Variety of optical lenses.
FINISH
Variety of powdercoat and anodized finishes available.
ELECTRONICS
LED module features high brightness white Nichia LEDs. 3-step MacAdam Ellipses binning and CRI 84 minimum. Variety of electronic 120v/277v and dimming devices.
CONSTRUCTION
Extruded and machined 6063-H32 aluminum heatsink. Titanium gasket for optimal thermal management. Housing constructed of #20 ga. galvanized steel to resist corrosion. Refractor made of cast UV stabilized acrylic.
CODE COMPLIANCE
ARRA Compliant. ETL/UL/CSA listed for damp locations. LM79/LM80/TM21 data available. Manufactured and built to UL standards No. 1598/8750.
DLC LISTING: PRDDHLEDOS99W35K
PRDDH22LEDOS99W35KDS102/xx/xx/PR22/xx (NO LENS ONLY)
PRDDH22LEDOS99W35KE1/xx/xx/PR22/xx (NO LENS ONLY)
PRDDH22LEDOS99W35KDO102/xx/xx/PR22/xx (NO LENS ONLY)
PRDDH22LEDOS99W35KE2/xx/xx/PR22/xx (NO LENS ONLY)
PRDDH22LEDOS99W35KEDS101/xx/xx/PR22/xx (NO LENS ONLY)
PRDDH22LEDOS99W35KDO102/xx/xx/PR22/xx (NO LENS ONLY)- OS LED Prismatic 12" DDH Mini-Bay 3000 Lm Max
PRDDH12LEDOS
APPLICATION
Lumen Max LED Series Mini Pendant offers a unique design for low and mid-bay applications.- OS LED Power Module / Retrofit 3000Lm
PM1LEDOS, PM2LEDOS, PM3LEDOS
APPLICATION
Power Module LED retrofit, can be screwed directly into existing Mogul or Medium base socket.- OS LED Aluminum 22" DDH Hi-Bay 99W Max
ALDDH22LEDOS
APPLICATION
Lumen Max LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- OS LED Aluminum 12" / 16" DDH Mini Bay 3000 Lm Max
ALDDH-LEDOS
APPLICATION
Lumen Max Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- OS LED 9" Suspended Translucent 4500Lm
SGE9LEDOS - DECORATIVE TRIM / NON-IC RATED
APPLICATION
9" LED Downlight with Suspended Deco Bowl and outside ring in 18" and 24" diameters.- OS LED 9" Suspended Bowl Trim 4500Lm
SGE6LEDOS,SGE9LEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
6" and 9" LED Downlight with Suspended Decorative Bowl in 14" and 20" diameters.- OS LED 9" Round Downlight 4500Lm
SGE9LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
9" LED Recessed open aperture downlight for general downlighting.- OS LED 8" Round Wall Wash 4500Lm
SGW8LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
8" LED Recessed wall wash aperture downlight for general illumination.- OS LED 8" Round Downlight 4500Lm
SGE8LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
8" LED Recessed open aperture downlight for general downlighting.- OS LED 8" Icon Recessed 4500Lm
SGE8LEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
Icon 8" LED Recessed Decorative Series features a shallow matte white reflector that glows gently from white glass shade.- OS LED 8" Downlight Estimator Series
SP8000L
APPLICATION
8" Estimators Series LED Downlight for General Illumination.
FEATURES
This series offers new construction options. Two stage optical system delivers smooth general illumination. Tool-less LED module, driver, and J-Box access. LED Module fits in most 8" Incandescent and compact fluorescent fixtures and can be ordered separately. Consult factory for options.
FINISH
LED module is offered in matte white finish.
ELECTRONICS
LED module features high brightness white Osram LEDs. 3-step MacAdam Ellipses binning and CRI 82 minimum. Fixture dims with standard MLV or ELV type dimmers. Consult factory for updated approved dimming list. Fixtures are 120v or 277v.
CONSTRUCTION
Passive aluminum heatsink. Housing/frame constructed of stamped galvanized steel and aluminum. Self flanged one piece molded plastic trim.
CODE COMPLIANCE
Energy Star Certified. Lighting Facts data available. Title 24 Compliant. Manufactured and tested to UL standards No. 8750.- OS LED 6" Square Wall Wash 4500Lm
SGW6SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed square aperture wall wash for general illumination.- OS LED 6" Square Techzone Ceiling 4500Lm
SGTZ6LEDOS
TECHZONE™ / NON-IC RATED
APPLICATION
6" Square Recessed downlight series for installation in TechZone™ 6" ceilings.- OS LED 6" Square Shallow Plenum Downlight 4500Lm
SGS6SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed shallow plenum square aperture downlight for general downlighting.- OS LED 6" Square Downlight 4500Lm
SGE6SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed square aperture downlight for general downlighting.- OS LED 6" Round Wall Wash 4500Lm
SGW6LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed wall wash aperture downlight for general illumination.- OS LED 6" Round Trimless Downlight 4500Lm
SGE6PZLEDOS
TRIMLESS / NON-IC RATED
APPLICATION
6" LED Recessed open aperture downlight with flangeless trim for general downlighting.- OS LED 6" Round Tamper Resistant 4500Lm
SGTP6LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed Tamper Resistant downlight.- OS LED 6" Round Super Shallow Downlight
SGSI6OS
TRIM FLANGE / IC RATED
APPLICATION
6" recessed round super shallow open aperture downlight for general downlighting.- OS LED 6" Round Downlight 4500Lm
SGE6LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed open aperture downlight for general downlighting.- OS LED 6" Polymer Wet Location 4500Lm
SGDF6LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
Round OS Series LED downlight with Flush Polymer wet location shower trim.- OS LED 6" Estimator Series New Construction 1500Lm
SP6000T
APPLICATION
6" SP Estimator series LED Downlight for general illumination features a wide range of new and remodel.- OS LED 6" Estimator Series New Construction
SP6000L, SP6000LRM
APPLICATION
6" SP Estimator series LED Downlight for general illumination features a wide range of new, remodel and IC housings.
FEATURES
This series offers new construction and retrofit options. Insulated Ceiling option for New and Remodel fixtures. Two stage optical system delivers smooth general illumination. Tool-less LED module, driver, and J-Box access. LED Module fits in most 5" and 6" Incandescent and compact fluorescent fixtures and can be ordered separately. Consult factory for options.
FINISH
LED module is offered in matte white finish.
ELECTRONICS
LED module features high brightness white Osram LEDs. 3-step MacAdam Ellipses binning and CRI 82 minimum. High CRI (90) available on some modules. SE model features Sunset (Dim to warm) effect. Fixture dims with standard MLV or ELV type dimmers. Consult factory for updated approved dimming list. Base fixtures are 120v. 277v step down transformer available.
CONSTRUCTION
Passive aluminum heatsink. Housing/frame constructed of stamped galvanized steel and aluminum. Self flanged one piece molded plastic trim.
CODE COMPLIANCE
Energy Star Certified. Lighting Facts data available. Title 24 Compliant. Manufactured and tested to UL standards No. 8750.- OS LED 6" Deep Deco 3 Tiers Ring Trim 4500Lm
SGE6DLEDOS
DECORATIVE TRIM / NON-IC RATED
APPLICATION
6" LED Recessed open aperture deep cut off downlight for general downlighting. Three tier decorative ring trim adds visual appeal and ceiling brightness.- OS LED 6" Deep Cut Off Downlight 4500Lm
SGE6DLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed open aperture deep cut off downlight for general downlighting.- OS LED 6" & 8" Round Slope Ceiling 4500Lm
SGSC6LEDOS,SGSC8LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
OS series designed for slope ceiling applications.- OS LED 5" Round Wall Wash 4500Lm
SGW5LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
5" LED Recessed wall wash aperture downlight for general illumination.- OS LED 5" Round Downlight 4500Lm
SGE5LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
5" LED Recessed open aperture downlight for general downlighting.- OS LED 5" Deep Cut Off Downlight 4500Lm
SGE5DLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
5" LED Recessed open aperture deep cut off downlight for general downlighting.- OS LED 4"/6" Square Tamper Resistant 4500Lm
SGTP4SQLEDOS,SGTP6SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
4" and 6" LED Recessed Tamper Resistant downlight.- OS LED 4"/6" Square Flush Lens 4500Lm
SGEF4SQLEDOS,SGEF6SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
LED Recessed Flush Lens square aperture downlight with die cast aluminum trim. Wide light distribution and wet location available.- OS LED 4"/6" Round IC Rated Downlight 3000Lm
SGICE4LEDOS, SGICE6LEDOS
TRIM FLANGE / IC RATED
APPLICATION
4"/6" LED Recessed open aperture downlight for Insulated Ceiling installations for general downlighting.- OS LED 4"/6" PZ Square Downlight 4500Lm
SGE4PZSQLEDOS,SGE6PZSQLEDOS
TRIMLESS / NON-IC RATED
APPLICATION
4" & 6" LED Recessed square flangeless trim aperture downlight for general downlighting.- OS LED 4"-8" Round Retrofit Wall Wash 4500Lm
SGRTW4LEDOS, SGRTW5LEDOS,
SGRTW6LEDOS, SGRTW8LEDOS
TRIM FLANGE / NON IC-RATEDAPPLICATION
Round OS general illumination series LED wall wash for retrofit or remodel applications.- OS LED 4"-14" Round Retrofit Downlight 4500Lm
SGRTE4LEDOS, SGRTE5LEDOS, SGRTE6LEDOS,
SGRTE7LEDOS, SGRTE8LEDOS, SGRTE9LEDOS,
SGRTE10LEDOS, SGRTE12LEDOS, SGRTE14LEDOS
TRIM FLANGE / NON IC-RATEDAPPLICATION
Round OS general illumination series LED downlight for retrofit or remodel applications.- OS LED 4", 5" & 6" Round Fire Pro 2000Lm
FPE4LEDOS,FPE5LEDOS,FPE6LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
Fire Pro 4", 5" and 6" LED recessed open aperture downlight for fire rated ceilings.- OS LED 4" Square Wall Wash 4500Lm
SGW4SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
4" LED Recessed square aperture wall wash for general illumination.- OS LED 4" Square Techzone Ceiling 4500Lm
SGTZ4LEDOS
TECHZONE™ / NON-IC RATED
APPLICATION
4" Square Recessed downlight series for installation in TechZone™ 4" ceilings.- OS LED 4" Square Downlight 4500Lm
SGE4SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
4" LED Recessed square aperture downlight for general downlighting.- OS LED 4" Round Wall Wash 4500Lm
SGW4LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
4" LED Recessed wall wash aperture downlight for general illumination.- OS LED 4" Round Flush Lens 4500Lm
SGEF4LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
4" LED Recessed Flush Lens round aperture with die cast aluminum trim. Wide light distribution and wet location available.- OS LED 4" Round Downlight 4500Lm
SGE4LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
4" LED Recessed open aperture downlight for general downlighting.- OS LED 4" Downlight Estimator Series
SP4000L, SP4000LRM, SP4000LICAT
APPLICATION
4" SP Estimator series LED Downlight for general illumination features a wide range of new, remodel and IC housings.
FEATURES
This series offers new construction and retrofit options. Insulated Ceiling option for New Construction only. Two stage optical system delivers smooth general illumination. Tool-less LED module, driver, and J-Box access. LED Module fits in most 4" Incandescent fixtures and can be ordered separately. Consult factory for options.
FINISH
LED module is offered in matte white finish.
ELECTRONICS
LED module features high brightness white Osram LEDs. 3-step MacAdam Ellipses binning and CRI 82 minimum. Fixture dims with standard MLV or ELV type dimmers. Consult factory for updated approved dimming list. Base fixtures are 120v. 277v step down transformer available.
CONSTRUCTION
Passive aluminum heatsink. Housing/frame constructed of stamped galvanized steel and aluminum. Self flanged one piece molded plastic trim.
CODE COMPLIANCE
Energy Star Certified. Lighting Facts data available. Title 24 Compliant. Manufactured and tested to UL standards No. 8750.- OS LED 4" Deep Cut Off Downlight 4500Lm
SGE4DLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
4" LED Recessed open aperture deep cut off downlight for general downlighting.- OS LED 4" & 6" Square Fire Pro 2000Lm
FPE4SQLEDOS,FPE6SQLEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
Fire Pro 4" and 6" LED recessed square open aperture downlight for fire rated ceilings.- OS LED 10"-14" Round Downlight 4500 Lm
SGE10LEDOS,SGE12LEDOS,SGE14LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
10", 12" and 14" LED Recessed open aperture downlight for general downlighting.- OS Flood Bay 29000Lm
LM1430OS
APPLICATION
Sport-Bay fixture designed for 20' + mounting heights. Can be used as downlight or floodlight. For use in gymnasiums, high ceilings and area lighting.- OS Flood Bay 18000Lm
LM1420OS
APPLICATION
Sport-Bay fixture designed for 20' + mounting heights. Can be used as downlight or floodlight. For use in gymnasiums, high ceilings and area lighting.- OS 6" Round Retrofit/Remodel Tamper Resistant
SGRTP6LEDOS
TRIM FLANGE / NON-IC RATED
APPLICATION
Round OS Tamper Resistant retrofit/remodel downlight.- Open Center Glass Hard
• 1THS offers a hard edged square in glass or acrylic with an open center.
- Open Center Frosted Sq. Tier
SG4HSQ/AR0404
• 1TFGSQOC offers a hard edged square in glass an open square center.- Open Center Frosted Glass Soft
• 1TSSFG offers a soft edged square in glass with an open center.
- OL Specline Pendant 2500Lm
SL03IND24OL, SL03IND48OL, SL03IND96OL
APPLICATION
1.8" aperture linear pendant for general illumination.- OL Specline Grid Ceiling 2500Lm
LT0324OL, LT0348OL
APPLICATION
Specline 1.8" aperture architectural slot for accent and general illumination.- OC STT 3" Tracklight 2100Lm
STT3OC
APPLICATIONS
Spectrum 3" Round track light for accent lighting.
- OC LED 3" Square Platform Retrofit / Remodel
RTS3LEDOC
APPLICATION
Square OC general illumination series LED downlight for retrofit or remodel applications.- OC LED 3" Round Platform Retrofit / Remodel
RTR3LEDOC
APPLICATION
Round OC general illumination series LED downlight for retrofit or remodel applications.- OC 6" Square Adjustable Accent
SAFO6OC
TRIM FLANGE / NON IC RATED
APPLICATIONS
6" square LED adjustable accent light with finished trim flange for Non-IC installations.- OC 6" Round Adjustable Accent
RAFO6OC
TRIM FLANGE / NON IC RATED
APPLICATIONS
6" Round LED adjustable accent light with finished trim flange for Non-IC installations.- OC 4" Square Adjustable Accent
SAFO4OC
TRIM FLANGE / NON IC RATED
APPLICATIONS
4" square LED adjustable accent light with finished trim flange for Non-IC installations.- OC 4" Round Adjustable Accent
RAFO4OC
TRIM FLANGE / NON IC RATED
APPLICATIONS
4" Round LED adjustable accent light with finished trim flange for Non-IC installations.- OC 3" Square Platform Standard, IC, Remodel
SDFO3,SDFI3S,SDFI3D,RTS3
NON-IC / IC / REMODEL
APPLICATION
Versatile shallow plenum 3" square aperture recessed LED fixture features downlight, wall wash and adjustable accent trim options that are installed in one universal housing.- OC 3" Round Platform Standard, IC, Remodel
RDFO3,RDFI3S,RDFI3D,RTR3
NON-IC / IC / REMODEL
APPLICATION
Versatile shallow plenum 3" round recessed LED fixture features downlight, wall wash and adjustable accent trim options with new construction, insulated ceiling construction and remodel construction housing.- OA X-Treme Pendant
XT4804LEDOA
X-treme LED pendant for functional area lighting or decorative accent.
- OA STW 24" Track Mounted 3000Lm
STW24OA,STW24OAL
APPLICATIONS
Spectrac high output LED track light ideal for large area illumination and for wall wash.- OA STW 12" Track Mounted 3000Lm
STW12OA
APPLICATIONS
Spectrac high output wall wash LED track light ideal for large
area illumination.
- OA LED Vapor Tight Series 16000 Lm Max
VT2LEDOA, VT4LEDOA
APPLICATIONS
Industry-Pro LED Dust and Vaportight LED area light.- OA LED P-ID9700 Linear Retrofit
LC-P-ID9700LEDOA
APPLICATION
Linear LED retrofit designed to fit Light Control fixture model number #P-ID9700.- OA LED 8" Square New/Remodel Soffit Light
SR8SQLEDOA
APPLICATION
8" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 8" Square New/Remodel Soffit Light
SR8SQLEDOA
APPLICATION
8" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 14" Square New/Remodel Soffit Light
SR14SQLEDOA
APPLICATION
14" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 14" Square New/Remodel Soffit Light
SR14SQLEDOA
APPLICATION
14" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 14" Square New/Remodel Area Light
RT14SQLEDOA & NC14SQLEDOA
APPLICATION
14" Square aperture area light for retrofit or new construction.- OA LED 14" Square New/Remodel Area Light
RT14SQLEDOA & NC14SQLEDOA
APPLICATION
14" Square aperture area light for retrofit or new construction.- OA LED 12" Square New/Remodel Soffit Light
SR12SQLEDOA
APPLICATION
12" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 12" Square New/Remodel Soffit Light
SR12SQLEDOA
APPLICATION
12" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 12" Square New/Remodel Area Light
RT12SQLEDOA & NC12SQLEDOA
APPLICATION
12" Square aperture area light for retrofit or new construction.- OA LED 12" Square New/Remodel Area Light
RT12SQLEDOA & NC12SQLEDOA
APPLICATION
12" Square aperture area light for retrofit or new construction.- OA LED 10" Square New/Remodel Soffit Light
SR10SQLEDOA
APPLICATION
10" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 10" Square New/Remodel Soffit Light
SR10SQLEDOA
APPLICATION
10" square recessed LED downlight LED features soffit/area light for optimal performance.- OA LED 10" Square New/Remodel Area Light
RT10SQLEDOA & NC10SQDRLEDOA
APPLICATION
10" Square aperture area light for retrofit or new construction.- OA LED 10" Square New/Remodel Area Light
RT10SQLEDOA & NC10SQDRLEDOA
APPLICATION
10" Square aperture area light for retrofit or new construction.- OA LED 10" Retrofit for HALO M200T
SGRM10SQM200TLEDOA
APPLICATION
10" Square aperture retrofit for HALO #M200T.- OA Atrium Fixture
ATL40X3LEDOA
APPLICATION
LED atrium fixture designed for 20’ + mounting heights. Fixture adjustment allows for use as down, side or indirect area light.
FEATURES
Three individual heads may be aimed for indirect (up), horizontal (side) or down lighting (down). Delivers a range of 9000-18000 lumens. Unique triangle of fabricated aluminum is decorative and functional providing a rigid mounting platform. Variety of finishes and mounting methods.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
LED module features high brightness white Nichia LEDs. 3-step MacAdam Ellipses binning and CRI 84 minimum. Variety of electronic 120v/277v and dimming drivers.
CONSTRUCTION
Extruded and machined 6063-H32 aluminum heatsink and fixture housing. Fixture frame constructed of aluminum extrusion and finished to specification.
CODE COMPLIANCE
ARRA Compliant. ETL/UL/CSA listed for damp locations. LM79/LM80/TM21 data available. Manufactured and tested to UL standards No. 1598/8750.- OA 12" SQ Lense 2200Lm
SG12SQLEDOA
APPLICATION
12" square recessed LED downlight features a curved linear prismatic acrylic center lens for optimal performance.- MRI INC 12"x5" Shallow Cylinder A19
SPC1205MRI
APPLICATION
12" Round shallow MRI cylinder series for use with A19 lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Spun .063 1100-0 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- MRI INC 12"x5" Lens Cylinder A19
SPC1205MRI
APPLICATION
12" Round shallow MRI cylinder series for use with A19 lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Spun .063 1100-0 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- MR16 LED Gimbal Ring - Track 20W Max
GTMR16LED
APPLICATIONS
Gimbal style track light for LED MR16 lamps.
FEATURES
Die cast gimbal ring with quick twist front bezel. Accepts 1-2 accessories.
Rotated 360° and tilts to 45° for optimal aiming.Available for a full range of
track systems.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die cast machined and stamped aluminum.
ELECTRONICS
Dimmable (Hatch Model# RS12-60M-LED) transformer for MR16 LED lamps. See your MR16 lamp manufacturer for compatability.
LABELS
Manufactured and tested to UL Standards No. 1598/8750.- MR16 LED Gimbal Ring - Track 20W Max
GTMR16LED
APPLICATIONS
Gimbal style track light for LED MR16 lamps.
- MR16 LED Gimbal Ring - Surface 20W Max
GTMR16LED
APPLICATIONS
Gimbal style track light for LED MR16 lamps.
FEATURES
Die cast gimbal ring with quick twist front bezel. Accepts 1-2 accessories.
Rotates 360° and tilts to 45° for optimal aiming. Pendant or surface mount
options.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die cast machined and stamped aluminum.
ELECTRONICS
Dimmable (Hatch Model# RS12-60M-LED) transformer for MR16 LED lamps. See your MR16 lamp manufacturer for compatability.
LABELS
Manufactured and tested to UL Standards No. 1598/8750.- Mini In Wall / Step Light
STPR
APPLICATION
Mini In wall / steplight series series for walkway safety, decorative accent and other footpath type lighting.
FEATURES
Fixtures offer contemporary style with functional luminaire performance. Low profile emitter modules fit within standard junction box and are designed to support cover plate. Steplight module may be ordered separately.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Features high brightness white LED’s. Produces 200 lumens at 5 watts. Available in 30K°, and 40 K°. Integral electronic dual voltage drivers. (120v/277v).
CONSTRUCTION
Housing is one-piece thermoformed all-weather polymer. Cover is die-cast aluminum, and finished to specification.
CODE COMPLIANCE
ETL listed for wet location. Manufactured and tested to UL standards No. 1598/8750.- MH-INC 4" Hoboken Pendant Series
SPCY0405D
APPLICATION
Hoboken Pendant features a clean design for a variety of architectural area lighting applications.
FEATURES
Speclume series fixtures offer contemporary style with functional luminaire performance. performance. All fixtures are designed and manufactured in our factory. Hoboken Pendant offers a variety of acrylic lengths and colors for a creative design. A variety of mounting and finishes options are available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Choose from Incandescent or Metal Halide lamping options. Consult factory for dimming and EM options.
CONSTRUCTION
Fixtures constructed of spun, machined and formed aluminum and optical quality UV stabilized cast acrylic.
CODE COMPLIANCE
ARRA Compliant. ETL/UL/CSA listed for damp locations. Manufactured and tested to UL standards No. 1598.- MH T9 10" Round Open Downlight
SGD10MH/AR1045
APPLICATION
10” Aperture Metal Halide Platform, features a deep cone for excellent cutoff,
and upper focusing reflector.
Excellent for high ceiling and general area lighting.
FEATURES
Energy efficient replaces 250w/ 400w lamping.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”, 277v only.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH T6 Euro - TX Tracklight
STX6MH
APPLICATIONS
Euro-TX tracklight for T6 mini Metal Halide Lamps.
FEATURES
Quick twist front bezel accepts up to three accessories. Choose T6 lamp type with 3 beam spreads. Lens/reflector/accessories are easily changed. Variety of mounting options.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast/extruded and machined aluminum.
ELECTRONICS
Electronic ballasts 120v-277v standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH T6 Euro - TF Tracklight
STF6MH
APPLICATIONS
Euro-TF tracklight for T6 mini Metal Halide Lamps.
FEATURES
Quick twist front bezel accepts up to three accessories. Choose T6 lamp type with 3 beam spreads. Lens/reflector/accessories are easily changed. Variety of mounting options.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast/extruded and machined aluminum.
ELECTRONICS
Electronic ballasts 120v-277v standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH T4-T4.5 Euro - TX Tracklight
STX4MH
APPLICATIONS
Euro-TX tracklight for T4 and T4.5 mini Metal Halide Lamps.
FEATURES
Quick twist front bezel accepts up to three accessories. Choose T4 or T4.5 lamp type with 3 beam spreads. Lens/reflector/accessories are easily changed. Variety of mounting options.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast/extruded and machined aluminum.
ELECTRONICS
Electronic ballasts 120V-277V standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH T4-T4.5 Euro - TF Tracklight
STF4MH
APPLICATIONS
Euro-TF tracklight for T4 and T4.5 mini Metal Halide Lamps.
FEATURES
Quick twist front bezel accepts up to three accessories. Choose T4 or T4.5 lamp type with 3 beam spreads. Lens/reflector/accessories are easily changed. Variety of mounting options.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast/extruded and machined aluminum.
ELECTRONICS
Electronic ballasts 120v-277v standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH T4 Wall Wash Tracklight
STWX4MH
APPLICATIONS
STWX wall wash for T4 metal halide lamp.
FEATURES
Adjustable mini wall wash for T4 lamps. Wide distribution for efficient wall illumination. Three tilt and rotation points for optional aiming. Rotation lock available on TEK100, HTEK100 and GA100 adaptors. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast/extruded and machined aluminum.
ELECTRONICS
Electronic ballasts 120v-277v Standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH T4 5" Round Open Downlight
• 5” Aperture T4 Metal Halide downlight.
• Intended for concrete pour construction.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• Ballast accessible from below ceiling.
• Listed for Damp Locations. Wet Location avaliable.
• Manufactured and tested to UL standard No. 1598.- MH Sign Light Series
SL0306MH
APPLICATION
The Sign Light is perfect for a variety of sign and surface lighting applications.
FEATURES
Spectrum Lighting's RLM Series are interpretations of classic lighting fixtures reimagined with modern MH light sources and materials. The wide range of combinations for illumination, mounting, enclosures, guards and finishes allows for creative fixture specification and design. A variety of lamp enclosures are available as well as guards and light shields. Fixtures may be wall or pendant mounted with standard or custom wall arm (goosenecks) and pendants.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Integral electronic Metal Halide 120v/277v ballast is thermally protected class A rated. Starting temp is -30° c/-20° f.
CONSTRUCTION
Fixture shades are spun in our factory from 0.063 high purity aluminum. Wall enclosures and fittings are die-cast aluminum with stainless steel hardware. Wall arms are formed 3/4 NPT aluminum pipe. Gaskets are machine cut neoprene.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and tested to UL standard No. 1598.- MH Prismatic 12"-16" ATXPR Series
ATXPR12-1MR and ATXPR16-1MR
• Tech pendant offers modern style with a variety of lamping options.
• 20 powdercoat colors available.
• Choice of mounting options and mounting systems.
• Damp location listed.
• Manufactured and tested to UL standard No. 1598 ETL Listed.- MH PAR30L Custom Tracklight
STPAR30LMH
APPLICATIONS
STPAR Series surface mount decorative track fixture.
FEATURES
Features optional company name/logo lazer etched in fixture. Enclosed integral Metal Halide ballast. Aims to 45° locks with set screws.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
Electronic ballasts 120v-277v standard. Specify voltage.
CONSTRUCTION
Fabricated .080 5052-H32 aluminum.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH PAR30 Decorative Tracklight
DAR30MH
APPLICATIONS
Deco PAR tracklight for PAR30 metal halide lamps.
FEATURES
Three tilt and rotation points for optional aiming. Rotation lock available on TEK100, HTEK100 and GA100 adaptors.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
Electronic ballasts 120v-277v Standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH PAR20 3.5" Round Adjustable
APPLICATION
3.5" round PAR20 adjustable accent light for Metal Halide lamps.
FEATURES
Features a 35° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and built to UL standard No. 1598.- MH PAR Can Surface Mount Tracklight
CAR38MH
APPLICATIONS
CAR Series surface mount tracklight fixture for PAR30 / PAR38 metal halide lamps.
FEATURES
Unique low profile fixture. Ballast housing mounts directly to J-Box, also available to be pendant mounted.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
Electronic ballasts 120v-277v Standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH PAR 9" Pull Down Lamp
- MH PAR 8" Round Pull Down Accent
• ‘Pull Down’ Features 45° tilt from vertical with a 359° axial rotation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH PAR 8" Round Pull Down Accent
APPLICATION
Adjustable Pull Down PAR30L/ PAR38 accent light.
FEATURES
Feature rotates 360°/ locks 35°/ Pull Down 6".
Can be set fully recessed or fully pulled down.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH PAR 8" Round Open Downlight
APPLICATION
8" Round PAR30L/ PAR38 downlight for Metal Halide lamps.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH PAR 8" Round Lens Wall Wash
APPLICATION
8” round PAR30L/ PAR38 lens wall wash for Metal Halide lamps.
FEATURES
Efficient wall wash design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH PAR 8" Round Lens Adjustable
APPLICATION
8” Round PAR30L/ PAR38 accent for Metal Halide lamps.
FEATURES
Features a 35° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH PAR 8" Round Lens Adjustable
SGRMA8MH
• 8” Aperture Remodel PAR Metal Halide Platform.
• Features a 35° adjustment from vertical with a 359° axial rotation.
• Intended for Non-IC remodel.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• Manufactured and tested to UL standard No. 1598.- MH PAR 7" Round Open Downlight
APPLICATION
7” Aperture PAR30L/ PAR38 Metal Halide Platform.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH PAR 7" Round Open Downlight
• 7” HS Series.
• Available open, and lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH PAR 7" Round Open Downlight
• 7” MH Series.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH PAR 7" Round Lens Downlight
• 7” HS Series.
• Available open, and lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277Vstandard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH PAR 7" Round Lens Adjustable
APPLICATION
7” round PAR30L/ PAR38 accent light for Metal Halide lamps.
FEATURES
Features a 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH PAR 6" Square Open Downlight
SGDSQMH/AR0306-PAR, SGDSQMH/AR0606-PAR
APPLICATION
6" Square aperture PAR30L/ PAR38 Metal Halide downlight.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH PAR 6" Square Open Adjustable
APPLICATION
6" Square PAR30L/ PAR38 Metal Halide adjustable accent light.
FEATURES
Features 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH PAR 6" Square Lens Wall Wash
APPLICATION
6" Square PAR30L/ PAR38 Metal Halide lens wall wash.
FEATURES
Efficient wall wash design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH PAR 5" Round Open Wall Wash
• 5” MH Series down-light.
• Available open, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH PAR 5" Round Open Downlight
• 5” Metal Halide series downlight.
• Available open, and wall wash.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120v/ 277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• UL listed to standard No.1598.- MH PAR 5" Round Lens Adjustable
APPLICATION
5" round PAR20/ PAR30L accent light for Metal Halide lamps.
FEATURES
Features a 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH PAR 5" Round Lens Adjustable
• SGA5MH PAR Series features a 45° adjustment from vertical.
• 359° axial rotation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH PAR 4" Square Lens Wall Wash
APPLICATION
4" Square aperture CMH16/ PAR20 Metal Halide lens wall wash.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH PAR 4" Round Open Downlight
SGD4MH/AR4450, SGD4MH/AR4455
APPLICATION
4” round PAR20 downlight for Metal Halide lamps.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and built to UL standard No. 1598.
- MH PAR 4" Round Open Downlight
• 4” Metal Halide down-light series.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• ETL listed to standard No. 1598.- MH PAR 3.5" Round Deco Trim
APPLICATION
3.5" round PAR20/ CMH16 downlight with decorative trims.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of decorative metal and glass trims.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and built to UL standard No. 1598.
- MH HID 9" Round Open Downlight
APPLICATION
H9MH series features a shallow open reflector for a very wide distribution.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 9" Round Open Downlight
• ED17 Lamps, and Twist-lok compact fluorescent emergency lamps.
• 18 ga. galvanized architectural fram.
• Adjustable mounting ears.
• 27” mounting bars or T-bar clips available.
• Electronic Metal Halide ballast up to 100 watts-120/277v
• Junction box pre-wired, grounded, listed for thruwiring.
• Damp location listed.
• Manufactured and tested to UL standard No. 1598. ETL listed.- MH HID 9" Round Open Downlight
• 9MH series features a open reflector for deep cutoff.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. galvanized steel.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH HID 9" Round Lens Downlight
APPLICATION
H9MH series features a wide distribution with a variety of lenses & splays.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH HID 9" Round Lens Downlight
• ED17 Lamps, and Twist-lok compact fluorescent emergency lamps.
• 18 ga. galvanized architectural fram.
• Adjustable mounting ears.
• 27” mounting bars or T-bar clips available.
• Electronic Metal Halide ballast up to 100 watts-120/277v
• Junction box pre-wired, grounded, listed for thruwiring.
• Damp location listed.
• Manufactured and tested to UL standard No. 1598. ETL listed.- MH HID 9" Round Lens Downlight
• 9MH series features a wide distribution.
• Variety of lenses and splays.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. galvanized steel.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH HID 9" Round Emergency Light
SGH9MH/CF*/AR9410
APPLICATION
Eliminates need for separate emergency circuit and generator when using Metal Halide lamping.
ED17 Lamps, and Twist-lock Compact Fluorescent emergency lamps.
FEATURES
9" open reflector for maximum efficienct.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Electronic Metal Halide ballast up to 100 watts-120v/ 277v.
Junction box pre-wired, grounded, listed for thru-wiring.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 9" Round Cross Baffle
SGH9MH/CF/AR9500
APPLICATION
Eliminates need for separate emergency circuit and generator when using Metal Halide lamping.
ED17 Lamps, and Twist-lock Compact Fluorescent emergency lamps.
FEATURES
4-cell cross blade trim for glare reduction.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Electronic Metal Halide ballast up to 100 watts-120V/ 277V.
Junction box pre-wired, grounded, listed for thru-wiring.
CONSTRUCTION
18 ga. galvanized architectural frame.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 9" Lens Emergency Light
SGH9MH/CF/AR9420
APPLICATION
Eliminates need for separate emergency circuit and generator when using Metal Halide lamping.
ED17 Lamps, and Twist-lock Compact Fluorescent emergency lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Electronic Metal Halide ballast up to 100 watts-120V/ 277V.
Junction box pre-wired, grounded, listed for thru-wiring.
CONSTRUCTION
18 ga. galvanized architectural frame.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH HID 9" Baffle Emergency Light
SGH9MH/CF*/AR9500
APPLICATION
Eliminates need for separate emergency circuit and generator when using Metal Halide lamping.
ED17 Lamps, and Twist-lock Compact Fluorescent emergency lamps.
FEATURES
4-cell cross blade trim for glare reduction.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Electronic Metal Halide ballast up to 100 watts-120V/ 277V.
Junction box pre-wired, grounded, listed for thru-wiring.
CONSTRUCTION
18 ga. galvanized architectural frame.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 8" Round Open Downlight
SG8MH/AR8215, SG8MH/AR8208
APPLICATION
8” Metal Halide series features a deep reflector for excellent cutoff.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 8" Round Lens Downlight
APPLICATION
8” MH series features a deep reflector and a wide variety of lenses & splays.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH HID 7" Round Shallow Lens
APPLICATION
7” MH series features a shallow depth and medium cutoff with a wide variety of lenses and splays.
FEATURES
Efficient reflector designed with a variety of lens options.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH HID 7" Round Open Downlight
SG7MH/7215, SG7MH/7208
APPLICATION
7” aperture Open downlight series for Metal Halide lamps.
FEATURES
Efficient reflector designed for PAR30L/ PAR38 and ED17 lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120V – 277V. (Specify voltage for correct thermal device).
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 7" Round Open Downlight
APPLICATION
7” MH series features a very deep reflector for excellent cutoff.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 7" Round Open Downlight
APPLICATION
7” MH series shallow depth and features a medium cutoff for wide general lighting.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 7" Round Lens Downlight
SG7MH/AR7225
APPLICATION
7” aperture Lensed downlight series for Metal Halide lamps.
FEATURES
Efficient reflector designed with a variety of lens options.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120V – 277V. (Specify voltage for correct thermal device).
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH HID 12" Round Open Downlight
SG12MH/AR1210
APPLICATION
12” Metal Halide series features a deep reflector for excellent cutoff.
FEATURES
Versatile fixture accepts a variety of Metal Halide lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 12" Round Open Downlight
• 12” Metal halide down light series.
• Available open and lens.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 12" Round Open Downlight
• 12” Metal halide down light series.
• Available open and lens.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 12" Round Lens Downlight
APPLICATION
12” MH series features a deep reflector for excellent cutoff with a
wide variety of lenses and splays.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH HID 12" Round Lens Downlight
• 12” Metal halide down light series.
• Available open and lens.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 12" Round Lens Downlight
• 12” Metal halide down light series.
• Available open and lens.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 12" Round Lens Downlight
• 12” Metal halide down light series.
• Available open and lens.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" Round Open Wall Wash
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" Round Open Downlight
SG10MH/AR1010
APPLICATION
10” MH series features a deep reflector and excellent cutoff.
FEATURES
Versatile fixture accepts a wide variety of Metal Halide lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH HID 10" Round Lens Downlight
APPLICATION
10” MH series features a deep reflector with a wide variety of lenses & splays.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Wet location available.
Manufactured and tested to UL standard No. 1598.- MH HID 10" Round Lens Downlight
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" Round Lens Downlight
• 12” Metal halide down light series.
• Available open and lens.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" Open Wall Wash
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" Open Downlight
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" Lens Wall Wash
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" High Pressure Open
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH HID 10" High Pressure Lens
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277Vstandard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard no. 1598.- MH HID 10" High Pressure Lens
•10” Metal Halide downlight series.
• Available open, wall washed, and lensed.
• 18 gauge galvanized steel frame.
• 27” bar hangers.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH CMH16 3.5" Lens Adjustable
SGA3MH/AR3500
• 3 1/2” aperture adjustable Metal Halide CMH16 accent light.
• Features a 35° adjustment from vertical with a 359° axial rotation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted, electronic sound rated “A”, multi-volt 120v or 277v.
• Manufactured and built to UL standard No. 1598.- MH BT5-T4 Euro - TX Tracklight
STX3MH
APPLICATIONS
Euro-TX tracklight for BT5 and T4 mini Metal Halide Lamps.
FEATURES
Quick twist front bezel accepts up to three accessories. Choose BT5 or T4 lamp type with 3 beam spreads. Lens/reflector/accessories are easily changed. Variety of mounting options.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast/extruded and machined aluminum.
ELECTRONICS
Electronic ballasts 120v-277v standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH BT5-T4 Euro - TF Tracklight
STF3MH
APPLICATIONS
Euro-TF tracklight for BT5 and T4 mini Metal Halide Lamps.
FEATURES
Quick twist front bezel accepts up to three accessories. Choose BT5 or T4 lamp type with 3 beam spreads. Lens/reflector/accessories are easily changed. Variety of mounting options.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast/extruded and machined aluminum.
ELECTRONICS
Electronic ballasts 120v-277v standard. Specify voltage.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- MH Atrium Indirect Series
ATWMH
APPLICATION
Atrium wall mount fixture for adjustable indirect lighting.
FEATURES
Speclume series fixtures offer contemporary style with functional luminaire performance. All fixtures are designed and manufactured in our factory. Atrium fixture can be mounted for direct or indirect output aimed to 45° degrees. ED17 or T6 lamps. Integral electronic ballast housing. A variety of finishes and lamp wattages are available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
CONSTRUCTION
Fixtures are machined in our factory from high purity aluminum. Passive machined aluminum heatsink for optimal thermal managment. Tempered glass solite safety lens.
ELECTRONICS
Integral electronic Metal Halide 120v/277v ballast is thermally protected class A rated. Starting temp is -30° c/-20° f.
LABELS
ARRA Compliant. UL/ETL listed for damp locations. Manufactured and tested to UL standard No. 1598.- MH Aluminum 12"-16" ATXAL Series
ATXAL12-1MR and ATXAL16-1MR
• Tech pendant offers modern style with a variety of lamping options.
• Outside finished in color of your choice.
• 20 powdercoat colors available.
• Choice of mounting options and mounting systems.
• Damp location listed.
• Manufactured and tested to UL standard No. 1598 ETL Listed.- MH 9" Stepped Deco Ring
APPLICATION
Stepped Deco Ring (STR) offers a semi-recessed decorative element.
FEATURES
Choice of 3 lenses.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
Class P, multi-volt 120v – 277v.
CONSTRUCTION
Frame constructed of #18 ga. galvanized steel.
Ring constructed of #18 ga. 5052 H32 aluminum.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 8" Square Open Downlight
APPLICATION
V8SQMH Series features a secondary reflector cone for optimum cutoff.
Wide distribution is excellent for general illumination.
FEATURES
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, core and coil.
CONSTRUCTION
Housing constructed of 20 ga. galvanized steel, vented for circulation.
Trim spun formed .050 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Wide Distribution
SGD8MH/AR8045-ED17
APPLICATION
8” Round ED17 downlight for Metal Halide lamps.
FEATURES
Primary and secondary optic designed for ED17 lamps.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location available.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Open Wall Wash
APPLICATION
8” MH series features a deep reflector for excellent cutoff & even Wall Wash.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Open Wall Wash
• 8” MH Series.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 8" Round Open Wall Wash
• 8” Metal halide horizontal down light series
• Available open, wall wash, and lens.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 8" Round Open Downlight
APPLICATION
H8MH Series features a shallow reflector for wide general lighting.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Open Downlight
SGB8MH/AR8216
APPLICATION
B8MH series features a deep reflector for excellent cutoff, plus increased wattage of 175w.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Open Downlight
• 8” Metal halide horizontal down light series
• Available open, wall wash, and lens.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 8" Round Open Downlight
• 8” MH Series.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 8" Round Open Downlight
APPLICATION
8” round T4/ T6 downlight for Metal Halide lamps.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location available.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Narrow Distribution
SGD8MH/AR8044-ED17
APPLICATION
8" Round ED17 downlight for Metal Halide lamps.
FEATURES
Primary and secondary optics designed for ED17 lamps.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location available.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Lens Wall Wash
• 8MH series features a deep reflector for excellent cutoff.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. galvanized steel.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH 8" Round Lens Wall Wash
APPLICATION
8” Metal Halide series for lens wall wash.
FEATURES
Efficient wall wash design with a variety of lens options.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Lens Downlight
APPLICATION
H8MH series features a shallow depth with a wide variety of lenses & splays.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Lens Downlight
APPLICATION
B8MH series features a deep reflector for excellent cutoff and a wide
variety of lenses and splays plus increased wattage of 175w.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 8" Round Lens Downlight
• 8” Metal halide horizontal down light series
• Available open, wall wash, and lens.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 8" Round Lens Downlight
• 8” MH Series.
• Available open.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 8" Round Lens Downlight
APPLICATION
8” Aperture PAR30L/ PAR38 Metal Halide Platform.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and built to UL standard No. 1598.- MH 8" Round Lens Adjustable
APPLICATION
8” Round ED17 accent for Metal Halide lamps.
FEATURES
Features a 35° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.
- MH 8" Round Deep Downlight
APPLICATION
H8MH Series features a secondary reflector cone for optimum cutoff.
FEATURES
Intended for Non-IC new construction.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 7" x 9" Pull Down Adjustable
SGW79MHT/PD0709T4, SGW79MHT/PD0709T6
APPLICATION
Adjustable Wall Wash housing Pulls Down and tilts to 35°.
FEATURES
Efficient reflector design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel and extruded aluminum.
Reflectors formed from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 7" x 9" Pull Down Adjustable
APPLICATION
Adjustable Wall Wash housing Pulls Down and tilts to 35°.
FEATURES
Efficient reflector design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel and extruded aluminum.
Reflectors formed from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 7" Round Shallow Wall Wash
• 7” Metal halide down light series.
• Available Open, wall wash, lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 7" Round Shallow Open
• 7” Metal halide down light series.
• Available Open, Wall Wash, Lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 7" Round Shallow Lens
• 7” Metal halide down light series.
• Available Open, Wall Wash, Lensed.
• 20 gauge galvanized steel frame.
• 12” bar hangers expandable to 24” standard.
• .0625 spun aluminum reflector.
• Junction box pre-wired, grounded.
• Electronic ballast 120/277V standard.
• Ballast serviceable from the ceiling aperture.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• UL listed to standard No. 1598.- MH 7" Round Open Wall Wash
APPLICATION
7” aperture Open Wall Wash series for Metal Halide lamps.
FEATURES
Efficient reflector designed for ED17 and BD17 lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120V – 277V. (Specify voltage for correct thermal device).
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 7" Round Open Downlight
SGD7MH
APPLICATION
7" round ED17 downlight for Metal Halide lamps.- MH 7" Round Open Downlight
• 7” Aperture ED17 Metal Halide Platform.
• Features a deep cone for excellent cutoff.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH 7" Round Open Downlight
APPLICATION
7” Round ED17 downlight for Metal Halide lamps.
FEATURES
Primary and secondary optics designed for ED17 lamps.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 7" Round Open Downlight
APPLICATION
7" round T4/ T6 open downlight for Metal Halide lamps.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 7" Round Lens Wall Wash
APPLICATION
7” Round PAR30L/ PAR38 lens wall wash for Metal Halide lamps.
FEATURES
Efficient wall wash design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 7" Round Lens Downlight
APPLICATION
7” Aperture PAR30L/ PAR38 Metal Halide Platform.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 7" Round Lens Adjustable
APPLICATION
7” Round ED17 accent lamp for Metal Halide lamps.
FEATURES
Features a 35° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 7" Round Lens Adjustable
• 7” Aperture T4 / T6 Metal Halide Platform.
• Features a 45° adjustment from vertical with a 359° axial rotation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH 7" Round Lens Adjustable
APPLICATION
7” round T4/ T6 accent light for Metal Halide lamps.
FEATURES
Features a 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 6" Square Open Downlight
APPLICATION
6" Square aperture T4/ T6 Metal Halide downlight.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 6" Square Lens Wall Wash
APPLICATION
6" Square aperture T4/ T6 Metal Halide wall wash.
FEATURES
Efficient wall wash design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 6" Square Lens Adjustable
APPLICATION
6" square aperture T4/ T6 adjustable accent.
FEATURES
Fixture features 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 6" Round Open Downlight
APPLICATION
Series features a Deep reflector for excellent cutoff.
FEATURES
Efficient reflector designed for ED17/ PAR30L and PAR38 lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 6" Round Multi Faceted
SG6MH/AR6416
APPLICATION
6” aperture series with multi-faceted reflector for distinct look.
FEATURES
Efficient reflector designed for ED17/ PAR30L and PAR38 lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 6" Round Lens Downlight
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector designed with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 5"-12" Retrofit Split Frame
SPRM5MH, SPRM6MH, SPRM7MH, SPRM8MH, SPRM9MH, SPRM10MH, SPRM12MH
• Easy to install remodeling system.
• .063 Heavy gauge reflector, self flange/white flange standard.
• Many finishes available on reflectors and flanges.
• Remodel ring made of 20 gauge galvanized steel for corrosion resistance.
• Positive locking clips on frame to secure reflector.
• Options include extended whip length,dimming ballasts, or quartz re-strike.
• Junction box removable, 13" whip standard.
• Electronic ballast 120/277.
• ETL listed.
• Made in USA.- MH 5"-12" Retrofit Downlight Ring
SGRM5MH, SGRM6MH, SGRM7MH, SGRM8MH, SGRM9MH, SGRM10MH, SGRM12MH
• Easy to install remodeling system.
• . 063 Heavy gauge reflector, self flange/white flange standard.
• Remodel ring made of 20 gauge galvanized steel for corrosion resistance.
• Many finishes available on reflectors and flanges.
• Return flange on ring for positive “stop”.
• Aid in “trimming out” ceiling opening.
• Mounting hardware provided.
• Electronic ballast 120/277 FCan ballast with 24” whip.
• Manufactured and tested to UL standard No. 1598.- MH 5" Round Open Wall Wash
APPLICATION
5” aperture open Wall Wash series for Metal Halide lamps.
FEATURES
Efficient reflector designed for ED17 lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120V – 277V. (Specify voltage for correct thermal device).
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 5" Round Open Downlight
APPLICATION
5” aperture open downlight series for Metal Halide lamps.
FEATURES
Efficient reflector designed for PAR20/ PAR30L and ED17 lamps.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v. (Specify voltage for correct thermal device).
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 5" Round Open Downlight
SGD5MH/AR5400, SGD5MH/AR5440
APPLICATION
5" round PAR20/ PAR30L downlight for Metal Halide lamps.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 5" Round Lens Wall Wash
• 5” Aperture T4 Metal Halide downlight.
• Intended for concrete pour construction. .
• Ballasts shall be integrally mounted, electronic sound rated “A”, multi-volt 120v or 277v.
• Ballast accessible from below ceiling.
• Listed for Damp Locations. Wet Location
• For options detail, see page numbers listed below available
• Manufactured and tested to UL standard No. 1598.- MH 5" Round Lens Wall Wash
SGL5MH/AR5550
• 5” Aperture T4 Metal Halide wall wash.
• Intended for concrete pour construction.
• Ballasts shall be integrally mounted, electronic sound rated “A”, multi-volt 120v or 277v.
• Ballast accessible from below ceiling.
• Listed for Damp Locations. Wet Location available
• Manufactured and tested to UL standard No. 1598.- MH 5" Round Lens Wall Wash
SGCPL5MH
• Metal Halide T4/T6 wash fixture designed for concrete pour applications.
• Housing is #18 gauge galvanized and treated with special corrosion resistant finish.
• Electronic ballast, (dual tapped 120/277).
• Ballast mounted to junction box, thermally protected.
• Accessible from below ceiling.
• Junction box pre-wired, grounded, listed for thru-wiring.
• Damp location listed.
• Manufactured and tested to UL standard No. 1598. ETL Listed.- MH 5" Round Lens Downlight
APPLICATION
5” aperture lensed downlight series for Metal Halide lamps.
FEATURES
Efficient reflector designed with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts are integrally mounted, electronic sound rated “A”, Class P,
multi-volt 120v – 277v. (Specify voltage for correct thermal device).
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 5" Round Lens Downlight
• 5” Aperture T4 Metal Halide Platform.
• Features 35° adjustment from vertical with a 359° axial rotation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH 5" Round Lens Concrete Pour
• 5” Aperture T4 Metal Halide downlight.
• Intended for concrete pour construction. .
• Ballasts shall be integrally mounted, electronic sound rated “A”, multi-volt 120v or 277v.
• Ballast accessible from below ceiling.
• Listed for Damp Locations. Wet Location
• For options detail, see page numbers listed below available
• Manufactured and tested to UL standard No. 1598.- MH 5" Round Lens Adjustable
APPLICATION
5” round T4/ T6 accent light for Metal Halide lamps.
FEATURES
Features 35° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 5" Rnd Open Concrete Pour
SGD5MH/AR5440
• 5” Aperture T4 Metal Halide downlight.
• Intended for concrete pour construction.
• Ballasts shall be integrally mounted, electronic sound rated “A”, multi-volt 120v or 277v.
• Ballast accessible from below ceiling.
• Listed for Damp Locations. Wet Location.
• Manufactured and tested to UL standard No. 1598.- MH 4"/5" Round Open Wall Wash
SGW4MH/AR4490, SGW5MH/AR5490
APPLICATIONS
4” and 5” aperture T4.5 (GU6.5) Metal Halide Wall Wash.
FEATURES
Conical lens and reflector design for increased efficiency, & visual comfort.
Rotating open wall wash adds versatility by offering adjustment once installed.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
Shallow housing depth.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Optional (EB) eco black powdercoat.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Housing constructed of 20 ga. aluminum.
Trim high purity .063 Spun aluminum, finished according to specifications.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 4"/5" Round Open Downlight
SGD4.5MH, SGD5.5MH
APPLICATION
4” and 5” round T4.5 (GU6.5) downlight for Metal Halide lamps.
FEATURES
Conical lens & reflector design for increased efficiency, and visual comfort.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Optional (EB) eco black powdercoat.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Housing constructed of 20 ga. aluminum.
Trim high purity .063 spun aluminum, finished according to specifications.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and built to UL standard No. 1598.- MH 4"/5" Round Open Downlight
APPLICATION
T4.5 (GU6.5) Metal Halide downlight.
Conical lens and reflector design for increased efficiency, and visual comfort.
FEATURES
Tool free ballast access for ease of maintenance.
Multi bar adjustable mounting brackets.
Shallow housing depth.
FINISH
Variety of powdercoat and anodized finishes available.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”, multi-volt
120v or 277v.
CONSTRUCTION
Housing constructed of 20 ga. CRS.
Goof ring available.
Optional (EB) eco black powdercoat.
Reflectors high purity .063 Spun aluminum, finished according to specifications.
LABELS
Damp location rated. Wet location optional.
Manufactured and tested to UL No. 1598.- MH 4"-12" Retrofit Downlight Series
SGRT4MH,SGRT5MH, SGRT6MH, SGRT7MH, SGRT8MH, SGRT9MH, SGRT10MH, SGRT12MH
• Easy to install remodeling system, for installations where frame is existing.
• . 063 Heavy gauge reflector, self flange/white flange standard.
• Other finishes and trims may be available.
• Options include extended whip length, QRS, mounting hub, fuse.
• Goof Ring Available.
• 13” whip standard.
• Electronic or F-Can ballast.
• Manufactured and tested to UL Standard No. 1598.- MH 4" x 8" Open Wall Wash
APPLICATION
4" x 8" aperture 2 lamp CMH16 vertical rectangle wall wash.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 4" x 8" Open Downlight
APPLICATION
4" x 8" aperture 2 lamp CMH16 rectangular area light.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 4" x 8" Open Adjustable
APPLICATION
4" x 8" aperture 2 lamp CMH16 accent light.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 4" x 8" Lens Wall Wash
APPLICATION
4" x 8" aperture 2 lamp CMH16 rectangle foward lens wall wash.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 4" Square Trimless Downlight
APPLICATION
EFEX² Series MH Square trimless aperture.
Fixture features shallow plenum and deep cutoff.
FEATURES
Tool free ballast access for ease of maintenance.
Intended for Non-IC new construction.
Supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Reflectors spun from .063 high purity aluminum and finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- MH 4" Square Serene Ceiling
SGDG4F/LW4.5SQ, SGDG4F/AW4.5SQ
• The mini square trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment during installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Square Open Downlight
APPLICATION
4" Square aperture CMH16/ PAR20 Metal Halide downlight.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 4" Square Open Downlight
APPLICATION
4" Square aperture T4 Metal Halide downlight.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 4" Square Open Adjustable
APPLICATION
4" Square aperture CMH16/ PAR20 Metal Halide accent light.
FEATURES
Features 35° adjustment from vertical with a 359° axial rotation.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 4" Square Lens Wall Wash
APPLICATION
4" Square aperture T4 Metal Halide wall wash.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting rackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 4" Square Lens Adjustable
APPLICATION
4" Square aperture T4 Metal Halide accent light.
FEATURES
Features 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 4" Round Open Downlight
APPLICATION
4” Metal Halide series features small aperture with medium cutoff.
FEATURES
Efficient reflector design optimized for Metal Halide lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on refl ector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 4" Round Open Downlight
APPLICATION
4" round T4 downlight for Metal Halide lamps.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and built to UL standard No. 1598.- MH 4" Round Open Adjustable
SGA4MHX/AR4500
APPLICATION
4" round PAR20/ CMH16 accent light for Metal Halide lamps.
FEATURES
Features a 35° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 4" Round Lens Wall Wash
APPLICATION
4" round PAR20/ CMH16 lens wall wash for Metal Halide lamps.
FEATURES
Efficient wall wash design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 4" Round Lens Wall Wash
APPLICATION
4" round T4 lens wall wash for Metal Halide lamps.
FEATURES
Efficient wall wash design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 4" Round Lens Downlight
APPLICATION
4” round T4 accent light for Metal Halide lamps.
FEATURES
Features a 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.
- MH 4" Mini Square Open Wall Wash
• The mini square trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment during installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Square Open Downlight
• The mini square trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment during installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Square Open Downlight
• The mini square trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment during installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Square Open Adjustable
• The mini square trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment during installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Square Open Adjustable
• The mini square trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment during installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Sq Lens Wet Location
• The mini square trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment during installation.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Wet Location
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Slot Aperture
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Slot Aperture
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Pin Hole
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Open Downlight
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Open Adjustable
SGDG4F/AR32SAPH, SGDG4F/AR32SASG
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Lens Wall Wash
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Mini Round Lens Wall Wash
• The mini round trim blends seamlessly with ceiling plane.
• Optional PZ Fitter with plaster mesh for a flush fit.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- MH 4" Adjustable Remodel CMH16
• Architectural Metal Halide CMH16 remodel fixture.
• Adjusts up to 35°, rotates 360°.
• Non IC construction.
• Supplied with adjustable brackets for positive contact with existing ceiling.
• Will adapt from 1/2" to 1" thick ceilings.
• Electronic ballast is standard.
• Manufactured and built to UL standard No .1589.- MH 3.5" Round Open Downlight
APPLICATION
3.5” Aperture CMH16 downlight for metal halide lamps.
FEATURES
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and built to UL standard No. 1598.- MH 3.5" Round Open Downlight
SGD3MH/AR3250_CMH16
• 3 1/2”Aperture CMH16 downlight.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted, electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.
• Manufactured and built to UL standard No. 1598.- MH 3.5" Round Lens Adjustable
APPLICATION
3.5" round CMH16 adjustable accent light for Metal Halide lamps.
FEATURES
Features a 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and fi nished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and built to UL standard No. 1598.- MH 3.5" Round Lens Adjustable
APPLICATION
3.5" round T4.5 (GU6.5) accent light for Metal Halide lamps.
FEATURES
Fixture features 45° adjustment from vertical with a 359° axial rotation.
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and built to UL standard No. 1598.- MH 3" Round Open Downlight
• Series features a deep trim for good cutoff.
• Variety of lens /accessory options.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Ballasts shall be integrally mounted.
• Electronic sound rated “A”, multi-volt 120v or 277v.
• UL Listed for Damp Locations.- MH 2'X2' Grid Ceiling Mount
GC22MH/AR1208, GC22MH/AR1611, GC22MH/AR2214
APPLICATION
2" x 2" pan to fit in grid ceiling with choice of reflector.
FEATURES
Efficient reflector design with a variety of options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- MH 12" Square Lens Downlight
APPLICATION
12” Square Metal Halide Platform.
Features shallow plenum and wide distribution.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Trim of extruded aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 12" Round Open Downlight
APPLICATION
12” Aperture Metal Halide platform with a primary & secondary optical system.
FEATURES
Intended for Non-IC new construction.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 12" Round Lens Downlight
APPLICATION
SG12MH features a shallow plenum and wide variety of lenses and splays.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL standard No. 1598.- MH 12" Round Lens Adjustable
APPLICATION
SGA12 adjustable high wattage Metal Halide fixture.
FEATURES
Features 30° adjustment from vertical with a 359° axial rotation.
Efficient reflector design with a variety of lens options.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 10" Round Turbo Louver
APPLICATION
Series features a shallow depth with a decorative turbo louver trim.
FEATURES
6-cell turbo-louver for maximum glare reduction.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 10" Round Open Wall Wash
APPLICATION
10” MH series features a deep reflector with an even Wall Wash.
FEATURES
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120V or 277V.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- MH 10" Round Deep Downlight
APPLICATION
10” Aperture Metal Halide platform with primary & secondary optical system.
FEATURES
Designed for high ceiling applications.
Integral 5/8" (0.625) plaster ring.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
Ballasts shall be integrally mounted, electronic sound rated “A”,
multi-volt 120v or 277v.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- LX Schoolhouse Shade 10000Lm
SS12LEDLX, SS14LEDLX, SS16LEDLX, SS18LEDLX - INTERIOR ONLY / DAMP LOCATION
APPLICATION
Decorative glass pendant schoolhouse shade for general area lighting. LX Series is designed for covered or indoor dry/damp locations.
- LX LED Warehouse Shade 14000Lm
WSDDH20LEDLX
APPLICATION
Warehouse Shade for decorative area lighting.
- LX LED Prismatic Tech Pendant 14000Lm
PRX22LEDLX
APPLICATION
22" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED Prismatic Pendant Series 13000Lm
PA1611LEDLX
APPLICATION
16" LED LX Series is a performance pendant that provides excellent vertical surface, general illumination.
- LX LED Prismatic 22" Prismatic Hi Bay 14000Lm
PRDDH22LEDLX
Lumen Max LX LED Series Performance Pendant for mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED 22" Prismatic EXT Mini-Bay 14000Lm
PREXT22LEDLX
22" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED 22" Prismatic EXT Arc Pendant 10000Lm
PRAF22LEDLX
APPLICATION
22" Arc Pendant evokes industrial age designs while using the latest LED technology for excellent general illumination.
- LX LED 22" Prismatic EXL Mini-Bay 14000Lm
PREXL22LEDLX
22" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED 22" Aluminum Hi-Bay 14000Lm
ALDDH22LEDLX
22" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- LX LED 22" Aluminum EXT Hi Bay 14000Lm
ALEXT22LEDLX
Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- LX LED 22" Aluminum EXL Mini-Bay 14000Lm
ALEXL22LEDLX
Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- LX LED 16" Prismatic Tech Pendant 13000Lm
PRX16LEDLX
APPLICATION
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED 16" Prismatic Hi Bay 14000Lm
PRDDH16LEDLX
Lumen Max LX LED Series Performance Pendant for mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED 16" Prismatic EXT Mini-Bay 14000Lm
PREXT16LEDLX
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED 16" Prismatic EXT Arc Pendant 10000Lm
PRAF16LEDLX
16" Arc Pendant evokes industrial age designs while using the latest LED technology for excellent general illumination.
- LX LED 16" Prismatic EXL Mini-Bay 14000 Lm Max
PREXL16LEDLX
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Prismatic refractor provides horizontal and vertical distribution.
- LX LED 16" Prismatic Arc Pendant 10000Lm
PRAFL16LEDLX
16" Arc Pendant evokes industrial age designs while using latest LED technology for excellent general illumination.
- LX LED 16" LED Aluminum Wide Distribution Mini-Bay 14000Lm
ALDDHWD16LEDLX
APPLICATION
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Wide distribution aluminum reflector designed for maximum downlight.
- LX LED 16" LED Aluminum Medium Distribution Mini-Bay 14000Lm
ALDDHMD16LEDLX
APPLICATION
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Medium distribution aluminum reflector designed for maximum downlight.
- LX LED 16" Aluminum Tech Pendant 13000Lm
ALX16LEDLX
APPLICATION
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector provides horizontal and vertical distribution.
- LX LED 16" Aluminum Mini-Bay 14000Lm
ALDDH16LEDLX
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- LX LED 16" Aluminum EXT Hi Bay 14000Lm
ALEXT16LEDLX
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- LX LED 16" Aluminum EXL Mini-Bay 14000Lm
ALEXL16LEDLX
16" Lumen Max LX LED Series Performance Pendant for low, mid-bay and hi-bay applications. Aluminum reflector designed for maximum downlight.
- LX LED 12" Prismatic Pendant Series 10000Lm
PA1212LEDLX
12" LED LX Series is a performance pendant that provides excellent general illumination.
- LX LED 12" Opal Acrylic Pendant Series 10000Lm
WA1212LEDLX
12" LED LX Series is a performance pendant that provides excellent general illumination.
- LX Giant Dome 60W
GD2619LEDLX
APPLICATION
Giant Dome fixture offers wide distribution for general illumination.- LX 8" Deep Round
SGV8LX
TRIM FLANGE / NON-IC RATED
APPLICATION
8" recessed open aperture high output fixture for high ceiling area lighting with deep cutoff.- LX 48" Light Disc Pendant 15000Lm
LD4805LEDLX
APPLICATION
The Light Disc series for decorative and functional area lighting.
- LX 36" Light Disc Pendant 7600Lm
LD3605LEDLX
APPLICATION
The Light Disc series for decorative and functional area lighting.
- LX 24" Prismatic 13000Lm
PR2405LX - PENDANT MOUNT
APPLICATION
Lumen Max LX 24" Disco series high bay for area lighting in retail, gymnasiums, and open office areas.- LX 24" Light Disc Pendant 4700Lm
LD2405LEDLX
APPLICATION
The Light Disc series for decorative and functional area lighting.- LX 18" Light Disc Pendant 4100Lm
LD1805LEDLX
APPLICATION
The Light Disc series for decorative and functional area lighting.
- LW Warehouse Shade 2000Lm Exterior
WS1210LW, WS1410LW, WS1611LW,
WS1812LW, WS2015LWAPPLICATION
The Warehouse Shade is one of our most popular RLM styles for general downlighting.- LW Wall Mount Dome Light 2000Lm Exterior
DL1600LW
EXTERIOR / WET LOCATION
APPLICATION
Decorative wall mount fixture casts light back onto wall surface.
LW Series is designed for outdoor wet location.- LW Wall Bulkhead 2000Lm Exterior
WJ1LW
WALL MOUNT
APPLICATION
The LED Bulkhead Series offers rugged design and three mounting options. LW Series is designed for outdoor wet location.
APPLICATION
The LED Bulkhead Series offers rugged design and three mounting options. LW Series is designed for outdoor wet location.- LW Vapor Tight 2x1000Lm Exterior
WJ1LWX2
EXTERIOR ONLY / WET LOCATION
APPLICATION
The vapor tight series offers rugged design and three mounting options.
LW Series is designed for outdoor wet location.- LW Tech Tier 2000Lm Exterior
TT0510LW,TT1010LW,TT1610LW
EXTERIOR / WET LOCATION
APPLICATION
Tech Tier series for decorative general area lighting.
LW Series is designed for outdoor wet location.- LW Surface Bulkhead Series 2000Lm Exterior
SJ1LW
SURFACE MOUNT CEILING OR WALL
APPLICATION
The LED Bulkhead Series offers rugged design and three mounting options. LW Series is designed for outdoor wet location.- LW Stagecoach Shade 2000Lm Exterior
SV1007LW,SV1411LW
EXTERIOR / WET LOCATION
APPLICATION
The Stagecoach Shade RLM has a classic bell shape for decorative lighting. LW Series is designed for outdoor wet location.- LW Short Warehouse Shade 2000Lm Exterior
SW1509LW,SW1910LW
EXTERIOR / WET LOCATION
APPLICATION
The Short Warehouse Shade is a shallow version of most popular Warehouse Shades. LW Series is designed for outdoor wet location.- LW Radial Wave 2000Lm Exterior
RW1205LW,RW1405LW,RW1606LW,RW2007LW
EXTERIOR / WET LOCATION
APPLICATION
The Radial Wave is a classic RLM “Wave” style for decorative area lighting.
LW Series is designed for outdoor wet location.- LW Pier Light Straight 2000Lm Exterior
PN1411LW
EXTERIOR / WET LOCATION
APPLICATION
The contemporary Pier Light is both a beacon and an architectural element.
LW Series is designed for outdoor wet location.- LW Pier Light Short 2000Lm Exterior
PS1408LW,PS1609LW,PS2011LW
EXTERIOR / WET LOCATION
APPLICATION
Compact and contemporary the Pier Light Short is a shallow version of the pier light, for general area lighting. LW Series is designed for outdoor wet location.- LW Pier Light 2000Lm Exterior
PL1411LW,PL1613LW,PL2015LW
EXTERIOR / WET LOCATION
APPLICATION
The Pier Light RLM has a nautical design for decorative lighting.
LW Series is designed for outdoor wet location.- LW Pendant Bulkhead Series 2000 Lm Exterior
PJ1LW - PENDANT MOUNT
APPLICATION
The LED Bulkhead Series offers rugged design and three mounting options.
LW Series is designed for outdoor wet location.- LW Park Lighter 2000Lm Exterior
PK1910LW
EXTERIOR / WET LOCATION
APPLICATION
The Park Lighter Series offers rugged design and pole mounting options.
LW Series is designed for outdoor wet location.- LW Nautical Light 1000Lm Exterior
NL1008LW,NL1012LW
EXTERIOR / WET LOCATION
APPLICATION
Nautical Light RLM series for decorative area lighting.
LW Series is designed for outdoor wet location.- LW Mini Pier Light 2000Lm Exterior
MPN1209LW
EXTERIOR / WET LOCATION
APPLICATION
The compact and contemporary Mini Pier Light is both a beacon and an architectural element. LW Series is designed for outdoor wet location.- LW Mini Dock Light 1000Lm Exterior
DG09LW, DS09LW, DV06LW
EXTERIOR / WET LOCATION
APPLICATION
Mini Dock Light LED Series for area lighting.
LW Series is designed for outdoor wet location.- LW Large Dock Light 2000Lm Exterior
DO1609LW,DG1609LW,DS1609LW
EXTERIOR / WET LOCATION
APPLICATION
16" diameter Large Dock Light Series for decorative area and security lighting. LW Series is designed for outdoor wet location.- LW Expanded Dome 2000Lm Exterior
ED2015LW
EXTERIOR / WET LOCATION
APPLICATION
The Expanded Dome has an LED integral driver and LED for a simple installation. LW Series is designed for outdoor wet location.- LW Emblem Sign 2000Lm Exterior
EB0910LW,EB1214LW
EXTERIOR / WET LOCATION
APPLICATION
Emblem Sign light is perfect for a variety of sign and surface lighting applications. LW Series is designed for outdoor wet location.- LW Deep Bowl 2000Lm Exterior
DB1009LW,DB1211LE,DB1413LW,
DB1615LW,DB1817LW
EXTERIOR / WET LOCATION
APPLICATION
Deep Bowl is one of our most popular RLM styles for general lighting.
LW Series is designed for outdoor wet location.- LW Angled Reflector 2000Lm Exterior
AR1012LW,AR1214LW
EXTERIOR / WET LOCATION
APPLICATION
Angled Reflector light is perfect for a variety of sign and surface lighting applications. LW Series is designed for outdoor wet location.- LV PAR36 Stage Tracklight
SAR36LV
APPLICATIONS
Stage lighting type track head for PAR36LV lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated aluminum.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- LV PAR36 5" Rnd Open Downlight
SGD5LV/AR5400, SGD5LV/AR5450
APPLICATION
5" aperture round Low Voltage downlight.
FEATURES
Efficient trim design optimized for AR111/ PAR36 Halogen lamps.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.
- LV PAR36 5" Rnd Lens Adjustable
APPLICATION
5" aperture round Low Voltage adjustable accent light.
FEATURES
Efficient trim design optimized for Halogen lamps.
Trim rotates 360º for easy alignment, lamp tilts and locks to 35º.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV MR16 Tulip Glass Tracklight
SPTB509
APPLICATIONS
Decorative tulip glass MR16 tracklight.
FEATURES
Rotates 359° degrees, tilts 60° degrees. Front loading MR16 lamp/lens.
For use with Spectrum Basix track (TM3) series.
FINISH
White, Black, Chrome and Gold available.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL listed to Standard No. 1598.- LV MR16 Stage Tracklight
SAR16LV MR16
APPLICATIONS
MR16 stage lighting style track head for Low Voltage lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated aluminum.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- LV MR16 Slim Back Tracklight
SPTB112
APPLICATIONS
Slim back die cast MR16 tracklight.
FEATURES
Rotates 359° degrees, tilts 60° degrees. Front loading MR16 lamp/lens.
For use with Spectrum Basix track (TM3) series.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL listed to Standard No. 1598.- LV MR16 Radar Tracklight
SPTB149
APPLICATIONS
Decorative radar ring MR16 tracklight.
FEATURES
Rotates 359° degrees, tilts 60° degrees. Front loading MR16 lamp/lens.
For use with Spectrum Basix track (TM3) series.
FINISH
White, Black, Chrome and Gold available.
Variety of glasses ring colors.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL listed to Standard No. 1598.- LV MR16 Photo Style Tracklight
STQ16LV
APPLICATIONS
Photo style MR16 low voltage track fixture.
FEATURES
Integral barn doors. Electronic LED lamp rated transformer option. Rotation lock available on TEK100, HTEK100 and GA100 adaptors. Designed for MR16 lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Fabricated aluminum.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standards No. 1598.- LV MR16 Mini Gimbal Tracklight
SPTB009
APPLICATIONS
Mini gimbal MR16 tracklight.
FEATURES
Rotates 359° degrees, tilts 60° degrees. Front loading MR16 lamp/lens.
For use with Spectrum Basix track (TM3) series.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL listed to Standard No. 1598.- LV MR16 Fluted Glass Tracklight
SPTB501
APPLICATIONS
Decorative frosted glass MR16 tracklight.
- LV MR16 Eye Glass Tracklight
SPTB508
APPLICATIONS
Decorative eye glass MR16 tracklight.
- LV MR16 Decorative Glass Tracklight
SPTB07W
APPLICATIONS
Decorative cone glass MR16 tracklight.
FEATURES
Rotates 359° degrees, tilts 60° degrees. Front loading MR16 lamp/lens. For use with Spectrum Basix track (TM3) series.
FINISH
White, Black, Chrome and Gold available.
Variety of glasses ring colors.
ELECTRONICS
120V-12V electronic transformers standard. 277V-12V electronic transformer optional.
LABELS
UL listed to Standard No. 1598.- LV MR16 5" Rnd Open Downlight
SGDG4X/AR5250
• 3.5 Aperture MR16 low voltage downlight.
• Intended for concrete pour construction.
• Housing finish specific to concrete pour application.
• Electronic transformer is standard.
• Manufactured and tested to UL standard No. 1598.- LV MR16 5" Rnd Lens Downlight
• 5 Aperture MR16 low voltage downlight.
• Intended for concrete pour construction.
• Housing finish specific to concrete pour application.
• Electronic transformer is standard.
• Manufactured and tested to UL standard No.1598.- LV MR16 4" Sq Open Adjustable
APPLICATION
4" Square aperture MR16 adjustable accent.
FEATURES
Efficient trim design optimized for Halogen lamps.
Trim rotates 360º for easy alignment, lamp tilts and locks to 45º.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL Standard No. 1598.- LV MR16 4" Round Glass Trim
APPLICATION
3.5" aperture round MR16 downlight with opal glass trim.
FEATURES
Molded glass reflector design optimized for Halogen lamps. Integral
5/8" (0.625) plaster ring. Maximum wattage label (MWL) for low wattage
Halogen or LED lamps. Tool-less transformer access. Multi-bar adjustable
mounting brackets.
FINISH
Etched opal glass trim. Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
LABELS
UL/ETL Listed for Damp Locations. Wet location available. Manufactured
and tested to UL Standard No. 1598.- LV MR16 4" Rnd Trimless Downlight
APPLICATION
3.5" aperture MR16 trimless adjustable accent light.
FEATURES
Trim rotates 360° for easy aligment, tilts and locks to 45°.
PZ series for trimless installation in plaster ceilings.**
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less access for ease of mantenance.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120v Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Spun from .063 high purity aluminum and finished to specification.
LABELS
UL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV MR16 4" Rnd Super Shallow
SGDG4SS
APPLICATION
Series features a trim for a lamp positioned at the surface of the trim.
FEATURES
Integral 5/8" (0.625) plaster ring. Maximum wattage label (MWL) for low wattage Halogen or LED lamps. Tool-less transformer access. Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector. Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120v Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum. Trim fabricated from .063 aluminum and finished to specification.
LABELS
UL/ETL Listed for Damp Locations. Manufactured and tested to UL standard No. 1598.- LV MR16 4" Rnd Open Downlight
SGDG4X
• Series features a deep trim for good cutoff.
• Variety of lens /accessory options.
• Intended for non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL listed for Damp locations.- LV MR16 4" Rnd Open Downlight
APPLICATION
3.5" aperture round MR16 downlight with deep trim.
FEATURES
Efficient reflector design optimized for Halogen lamps.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL Standard No. 1598.- LV MR16 4" Rnd Open Downlight
SGDG4X/AR3200SAPH, SGDG4X/AR3200SASG, SGDG4X/AR3200SASL
• Series features a deep trim for good cutoff.
• Variety of lens /accessory options.
• The mini round trim blends seamlessly with ceiling plane.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- LV MR16 4" Rnd Open Downlight
APPLICATION
3.5 Versa light MR16 for flat trim installations.
FEATURES
Versa light housing accepts variety of trims.
Trim rotates 360º for easy alignment, tilts and locks to 45º.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less access for ease of mantenance.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120v Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim fabricated from .063 aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV MR16 4" Rnd Open Adjustable
APPLICATION
3.5" aperture round MR16 adjustable accent.
FEATURES
Efficient reflector design optimized for Halogen lamps.
Trim rotates 360º for easy alignment, lamp tilts and locks to 45º.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV MR16 4" Open Downlight
SP4100LV
APPLICATION
4" SP Estimator series MR16 Downlight for general illumination features a wide range of housing and trim options.
FEATURES
This series offers new construction in Non IC, IC listed and retrofit options. Insulated Ceiling option for New construction fixtures only. Wide variety of trims and finishes. Remodeler fixture is Non IC only. Integral expandable mounting bars.
FINISH
Wide range of anodized, painted and metal trim finishes available.
ELECTRONICS
Junction box pre-wired, grounded, thermally protected. 120v-12v magnetic transformer standard. Electronic 277v and 120v-12v and LED rated 120v-12v transformer optional.
CONSTRUCTION
Housing/frame constructed of stamped galvanized steel and aluminum. Trims are stamped, spun and cast aluminum.
CODE COMPLIANCE
UL listed for damp locations. Wet location available on some trims. Manufactured and tested to UL standards No. 1598/8750.- LV MR16 4" Adjustable Retrofit
• Architectural low voltage MR16 remodel fixture.
• Trim matches SGAG4X Series.
• Lamp rotates 360°, and tilts 30°.
• Non IC construction.
• Supplied with adjustable brackets for positive contact whith existing ceiling.
• Will adapt from 1/2" to 1" thick ceilings
• Electronic transformer is standard.
• Manufactured and built to UL standard No. 1589- LV MR16 3.5" Round Wall Wash
APPLICATION
3.5" aperture round MR16 lens wall wash.
FEATURES
Wall Wash trim can be rotated, aimed and locked.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL Standard No. 1598.- LV MR16 3.5" Round Deco Trim
SGDG4X
APPLICATION
3.5" aperture round MR16 downlight with decorative trims.
FEATURES
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of decorative metal and glass trims.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV MR16 3.5" Round Adjustable
SGDG4X
APPLICATION
3.5" aperture MR16 LV Adjustable accent trim.
FEATURES
Efficient reflector design optimized for Halogen lamps. Integral 5/8" (0.625) plaster ring. Maximum wattage label (MWL) for low wattage Halogen or LED lamps. Tool-less transformer access. Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim. Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum. Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ETL Listed for Damp Locations. Wet location available. Manufactured and tested to UL Standard No. 1598.- LV MR16 3.5" Rnd Super Shallow
SGDG4SH
• Series features a super shallow housing.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- LV MR16 3.5" Rnd Shower Light
APPLICATION
3.5" aperture round MR16 showerlight downlight with die cast trim.
FEATURES
Integral 5/8" (0.625) plaster ring. Maximum wattage label (MWL) for low
wattage Halogen or LED lamps. Tool-less transformer access. Multi-bar
adjustable mounting brackets.
FINISH
Variety of trim finishes. Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Trim die cast aluminum. Frame constructed of 20 ga. aluminum.
LABELS
UL/ETL Listed for Damp Locations. Wet location available. Manufactured and tested to UL Standard No. 1598.- LV MR16 3.5" Mini Trimless Downlight
APPLICATION
3.5" aperture MR16 trimless Downlight.
FEATURES
PZ series for trimless installation in plaster ceilings.**
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less access for ease of mantenance.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120v Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV MR16 3.5" Mini Round Downlight
APPLICATION
3.5 Versa light MR16 for Flush fit plaster installation.
FEATURES
Versa Light housing accepts variety of trims.
Trim rotates 360º for easy alignment, lamp tilts and locks to 45º.
Fits flush to ceiling with PZ4RP fitter.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less access for ease of mantenance.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120v Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim fabricated from .063 aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL standard No. 1598.- LV MR16 3" Rnd Estimator Series
SP3100LV
APPLICATION
3" SP Estimator series MR16 Downlight for general illumination features a wide range of housing and trim options.
FEATURES
This series offers new construction in Non IC, IC listed and retrofit options. Insulated Ceiling option for New construction fixtures only. Wide variety of trims and finishes. Remodeler fixture is Non IC only. Integral expandable mounting bars.
FINISH
Wide range of anodized, painted and metal trim finishes available.
ELECTRONICS
Junction box pre-wired, grounded, thermally protected. 120v-12v magnetic transformer standard. Electronic 120v-12v and LED rated 120v-12v transformer optional.
CONSTRUCTION
Housing/frame constructed of stamped galvanized steel and aluminum. Trims are stamped, spun and cast aluminum.
CODE COMPLIANCE
UL listed for damp locations. Wet location available on some trims. Manufactured and tested to UL standards No. 1598/8750.- LV 8"x"8 Flush Flat MR16 Series
RC88SQLV
APPLICATION
8" Square aperture for 4 x MR16 adjustable accent light.- LV 5" Suspended / Surface MR16 Series
RCC510LV, RCC515LV
APPLICATION
RCC 5" series MR16 Low Voltage suspended/surface accent light.- LV 5" Round Open Cylinder MR16
SPC0507LV
APPLICATION
5" Cylinder Series for use with MR16 lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures. This series offers a variety of finish trims.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Electronic Transformer 120v standard. 277v and 120v electronic LED
Transformer optional.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- LV 4" Shallow Regressed Razor MR16 Series
RC44DLVNF, RC48DLVNF, RC412DLVNF, RC416DLVNF
REGRESSED RAZOR EDGE / NON-IC RATED
APPLICATION
RC4 series Shallow Plenum MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" Shallow Regressed Beveled MR16 Series
RC44DLVRT, RC48DLVRT, RC412DLVRT, RC416DLVRT
REGRESSED BEVELED FLANGED / NON-IC RATED
APPLICATION
RC4 series Shallow Plenum MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" Shallow Flush Flat MR16 Series
RC44DLVFT, RC48DLVFT, RC412DLVFT, RC416DLVFT
FLUSH FLAT FLANGED / NON-IC RATED
APPLICATION
RC4 series Shallow Plenum MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" Regressed Razor MR16 Series
RC44LVNF, RC48LVNF, RC412LVNF, RC416LVNF
REGRESSED RAZOR EDGE / NON-IC RATED
APPLICATION
RC4 series MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" Regressed Beveled MR16 Series
RC44LVRT, RC48LVRT, RC412LVRT, RC416LVRT
REGRESSED BEVELED FLANGED / NON-IC RATED
APPLICATION
RC4 series MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" Mini Square Trimless Downlight
SGDG4X
APPLICATION
3.5" Versa Light MR16 for flat ceiling installations.
FEATURES
Versa light housing accepts a variety of trims.
Trim rotates 360º for easy alignment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less access for ease of mantenance.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120v electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim fabricated from .063 aluminum and fi nished to specifications.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV 4" Mini Sq. Trimless Shallow
SGDG4SQF
APPLICATION
3.5" square Versa light MR16 for flush fit plaster installations.- LV 4" Mini Round Downlight
SGD4X/AR3200NAPH, SGD4X/AR3200NAWL
• Series features a deep trim for good cutoff.
• Variety of lens /accessory options.
• The mini round trim blends seamlessly with ceiling plane.
• Trim rotates 360º for easy alignment, and locks to 40º.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. aluminum.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• Electronic transformer is standard.
• UL Listed for Damp Locations.- LV 4" IC Regressed Razor MR16 Series
RC44ICLVNF, RC48ICLVNF, RC412ICLVNF, RC416ICLVNF
REGRESSED RAZOR EDGE / IC RATED
APPLICATION
RC4 series MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" IC Regressed Beveled MR16 Series
RC44ICLVRT, RC48ICLVRT, RC412ICLVRT, RC416ICLVRT
REGRESSED BEVELED FLANGED / IC RATED
APPLICATION
RC4 series MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" IC Flush Flat MR16 Series
RC44ICLVFT, RC48ICLVFT, RC412ICLVFT, RC416ICLVFT
FLUSH FLAT FLANGED / IC RATED
APPLICATION
RC4 series MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 4" Flush Flat MR16 Series
RC44LVFT, RC48LVFT, RC412LVFT, RC416LVFT
FLUSH FLAT FLANGED / NON-IC RATED
APPLICATION
RC4 series MR16 Low Voltage modular fixture for retail, residential and commercial accent lighting.- LV 3.5" Trimless Wall Wash
APPLICATION
3.5" aperture MR16 Trimless wall wash.
FEATURES
PZ series for trimless installation in plaster ceilings.**
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less access for ease of mantenance.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120v Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- LV 3" Mini Square Cylinder MR16
SPC0306SQLV
APPLICATION
3" Compact square cylinder series for use with MR16 lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Electronic Transformer 120v standard. 277v and 120v electronic LED
Transformer optional.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Stainless steel hardware with galvanized steel brackets to resist corrosion.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- LV 3" Mini Round Cylinder MR16
SPC0310UDLV, SPC0310UPLV, SPC0310DNLV,
SPC0310YKLVAPPLICATION
3" Cylinder series provides direct and indirect lighting for use with MR16 lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Electronic Transformer 120v standard. 277v and 120v electronic LED
Transformer optional.
CONSTRUCTION
Extruded and machined 6063 seamless aluminum fixture housing. Silicone gasket seals optical chamber. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- LV 3" Mini Round Cylinder MR16
SPC0304LV
APPLICATION
3" Compact round cylinder series for use with MR16 lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Electronic Transformer 120v standard. 277v and 120v electronic LED
Transformer optional.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Stainless steel hardware with galvanized steel brackets to resist corrosion.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- LU LED (K+) 4"-14" Round Dim to Warm Remodel
SGRTE4LEDLU, SGRTE5LEDLU, SGRTE6LEDLU, SGRTE7LEDLU, SGRTE8LEDLU, SGRTE9LEDLU, SGRTE10LEDLU, SGRTE12LEDLU, SGRTE14LEDLU - TRIM FLANGE / NON-IC RATED
APPLICATION
Round LU LED retrofit or remodel platform. Kelvin Tunable (K+) white light LED system that warms as it dims from 3050K at full intensity to 1800K at 1% intensity.- LU LED (HUE/CCT) 4"-14" Round Dim to Warm Remodel
SGRTE4LEDLU, SGRTE5LEDLU, SGRTE6LEDLU,
SGRTE7LEDLU, SGRTE8LEDLU, SGRTE9LEDLU,
SGRTE10LEDLU, SGRTE12LEDLU, SGRTE14LEDLU
TRIM FLANGE / NON-IC RATED
APPLICATION
Round LU LED retrofit or remodel platform with Tunable color (HUE) LED system. System can be programmed for scenes or set for manual control. Adjusts to over 300,000 colors as well as 1600K-6000K white light.- LU 6" Round Direct Dynamic Dimming
SPC0611LEDLU
APPLICATION
Round 6" x 11" LU LED downlight platform. Kelvin Tunable (K+) white light LED system that warms as it dims from 3000K at full intensity to 1800K at 1% intensity.
- LH LED 8" Downlight 12000Lm
SGE8LEDLH
TRIM FLANGE / NON-IC RATED
APPLICATION
8" LED Recessed round open aperture downlight high output fixture for high ceiling spaces in malls, churches and commercial applications.- LH LED 8" Adjustable Accent 12000Lm
SGA8LEDLH
TRIM FLANGE / NON-IC RATED
APPLICATION
8" LED Recessed round open aperture adjustable accent high output fixture for high ceiling illumination in malls, churches and commercial applications.- LH LED 6" Adjustable Accent 10000Lm
SGA6LEDLH
TRIM FLANGE / NON-IC RATED
APPLICATION
6" LED Recessed round open aperture adjustable accent high output fixture for high ceiling illumination in malls, churches and commercial applications.- LEDP 4"-12" Retrofit Series
SGRTP4LED, SGRTP5LED, SGRTP6LED, SGRTP7LED, SGRTP8LED, SGRTP9LED, SGRTP10LED, SGRTP12LED
• Custom clips install into exsisting frame.
• Allow installation of reflector/baffle/wiring assembly.
• .063 heavy guage reflector, soft glow flange/white flange standard.
• Other finishes and trims available.
• Options include extended whip length, good ring, and fusing.
• 13" whip standard.
• Manufactured and tested to UL standard No. 1598.- LED 5"-12" "RMP" Remodelight PAR
SGRMP5LED, SGRMP6LED, SGRMP7LED, SGRMP8LED, SGRMP9LED, SGRMP10LED, SGRMP12LED
• Easy to install remodeling system, with support ring.
• Ring made of 20 gauge aluminum for corrosion resistance.
• Return flange on ring for positive “stop”.
• Aid in triming out ceiling opening.
• .063 heavy guage reflector.
• Mounting hardware included.
• Goof ring available.
• Dimmable to 5%.
• Energy Star rating pending.
• Manufactured and tested to UL standard No. 1598.- Large In Wall / Step Light
STPLG
APPLICATION
Large in wall steplight series for walkway safety, decorative accent and other footpath type lighting.
FEATURES
Fixtures offer contemporary style with functional luminaire performance. Low profile emitter modules fit within standard junction box and are designed to support cover plate. Steplight module may be ordered separately.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
Features high brightness white LED’s. Produces 250 lumens at 6 watts. Available in 30K°, and 40 K°. Integral electronic dual voltage drivers. (120v/277v).
CONSTRUCTION
Housing is one-piece thermoformed all-weather polymer. Cover is die-cast aluminum, and finished to specification.
CODE COMPLIANCE
ETL listed for wet location. Manufactured and tested to UL standards No. 1598/8750.- INC Warehouse Shade Int./Ext.
WS1210INC,WS1410INC,WS1611INC,
WS1812INC,WS2015INC
INTERIOR / EXTERIOR
APPLICATION
The Warehouse Shade is one of our most popular RLM styles for general lighting. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Warehouse Dome w/ Door Interior Only
WD1611INC,WD1812INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Warehouse Dome is designed for decorative general illumination. Domed deco lens glows softly. INC Series is designed for covered or indoor dry/damp locations.- INC Warehouse Dome Int./Ext.
WD1611INC,WD1812INC,WD2015INC
INTERIOR / EXTERIOR
APPLICATION
The Warehouse Dome is designed for decorative general illumination.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Wall Mount Int./Ext.
DL1600INC
INTERIOR / EXTERIOR
APPLICATION
Decorative wall mount fixture casts light back onto wall surface.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Wall Mount Concordia Int. Only
CN1812INC
INTERIOR ONLY / DAMP LOCATIONAPPLICATION
The Wall Mount Concordia is one of our most elegant RLM styles.
INC Series is designed for covered or indoor dry/damp locations.- INC Vapor Tight Series Int./Ext.
WJ1INCX2 - SURFACE MOUNT
INTERIOR / EXTERIOR
APPLICATION
The Vapor Tight Series offers rugged design and three mounting options.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Tech Tier Series Int./Ext.
TT0510INC,TT1010INC,TT1610INC
INTERIOR / EXTERIOR
APPLICATION
Tech Tier series for decorative general area lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Subway Series Int./Ext.
SJ1INC - SURFACE MOUNT
INTERIOR / EXTERIOR
APPLICATION
The INC Subway Series offers rugged design and decorative perforated accent. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Subway Series Int./Ext.
WJ1INC - WALL MOUNT
INTERIOR / EXTERIOR
APPLICATION
The LED Bulkhead Series offers rugged design.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Subway Series Int./Ext.
SB1016INC
INTERIOR / EXTERIOR
APPLICATION
The Subway series inspired by the Boston “T” Train offers rugged design and a variety of decorative options. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Subway Series Int./Ext.
SB1014INC
INTERIOR / EXTERIOR
APPLICATION
The Subway series inspired by the Boston “T” Train offers rugged design and a variety of decorative options. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Subway Series Int./Ext.
PJ1INC - PENDANT MOUNT
INTERIOR / EXTERIOR
APPLICATION
The LED Bulkhead Series offers rugged design and three mounting options.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Subway Series Int./Ext.
WJ2INC - WALL MOUNT
INTERIOR / EXTERIOR
APPLICATION
The LED Bulkhead Series offers rugged design.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Stepped Glass Interior Only
ST1310INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
The Stepped Glass Bankers Light offers traditional looks with modern lamping options. INC Series is designed for covered or indoor dry/damp locations.- INC Stepped Dome Interior Only
SD1208INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Cafe series offers a playful variety of fixture shapes.
INC Series is designed for covered or indoor dry/damp locations.- INC Step Cylinder
SPTB703
APPLICATIONS
Step Neck “Classic” PAR tracklight.
FEATURES
For Use with Spectrum Lighting “Basix” Track.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V only.
LABELS
UL listed to Standard No. 1598.- INC Stagecoach Interior/Exterior
SV1007INC,SV1411INC
INTERIOR / EXTERIOR
APPLICATION
The Stagecoach Shade RLM has a classic bell shape for decorative downlighting. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Spike Sconce Series
FRMC0314UDINC
APPLICATION
Spike Sconce for decorative wall accent lighting.
FEATURES
Speclume series fixtures offers contemporary style with functional luminaire performance. All fixtures are designed and manufactured in our factory. Spike wall sconce sits flat against wall and projects “Hot” light pattern against wall for dramatic effect. A variety of lens, wattage and other options available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
50 watt max MR16. 120 volt standard (E1). 277 volt optional (E2).
CONSTRUCTION
Fixtures are fabricated in our factory from aluminum extrusion.
LABELS
ARRA Compliant. ETL/UL/CSA listed for damp locations. Manufactured and tested to UL standards No. 1598.- INC Small Schoolhouse Shade Int. Only
SS0806INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
The Small Schoolhouse Shade is ideal for entryways and as a wall mount sconce.
INC Series is designed for covered or indoor dry/damp locations.- INC Sign Light Series
SL0306INC
APPLICATION
The Sign Light is perfect for a variety of sign and surface lighting applications.
FEATURES
Spectrum Lighting's RLM Series are interpretations of classic lighting fixtures reimagined with modern INC light sources and materials. The wide range of combinations for illumination, mounting, enclosures, guards and finishes allows for creative fixture specification and design. A variety of lamp enclosures are available as well as guards and light shields. Fixtures may be wall or pendant mounted with standard or custom wall arm (goosenecks) and pendants. MR16 and LED lamping available.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
CONSTRUCTION
Fixture shades are spun in our factory from 0.063 high purity aluminum. Wall enclosures and fittings are die-cast aluminum with stainless steel hardware. Wall arms are formed 3/4 NPT aluminum pipe. Gaskets are machine cut neoprene.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and tested to UL standard No. 1598.- INC SHS Theatrical Tracklight
SHSINC
APPLICATIONS
SHS series theatrical track fixture for PAR30/PAR38 incandescent lamps.
FEATURES
Tilt and rotation points for optimal aiming. SHSSR Sparkle Design option. Integral barn doors.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC Short Warehouse Shade Int./Ext.
SW1509INC,SW1910INC
INTERIOR / EXTERIOR
APPLICATION
The Short Warehouse Shade is a shallow version of most popular Warehouse Shades. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Ship Light Interior Only
PY1824INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Ship Light fixture evokes classic nautical fixture design.
INC Series is designed for covered or indoor dry/damp locations.- INC Schoolhouse Shade Int. Only
SS12INC,SS14INC,SS16INC,SS18INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Decorative glass pendant schoolhouse shade for general area lighting.
INC Series is designed for covered or indoor dry/damp locations.- INC SAR38 Canopy Stage Tracklight
SAR38INC
APPLICATIONS
SAR Series surface mount track fixture for Incandescent lamps.
FEATURES
Three tilt and rotation points for optional aiming.
Rotation lock available on TEK100, HTEK100 and GA100 adaptors.
Accepts up to 3 accessories.
Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations.
Manufactured and tested to UL Standards No. 1598.- INC Round Back Cylinder
SPTB718
APPLICATIONS
Round back “Classic” PAR tracklight.
FEATURES
For Use with Spectrum Lighting “Basix” Track.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V only.
LABELS
UL listed to Standard No. 1598.- INC Rayed Bullet Interior Only
RB70INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Cafe series offers a playful variety of fixture shapes.
INC Series is designed for covered or indoor dry/damp locations.- INC Radial Wave Interior/Exterior
RW1205INC,RW1405INC,RW1606INC,RW2007INC
INTERIOR / EXTERIOR
APPLICATION
The Radial Wave is a classic RLM “Wave” style for decorative area lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Quartz T4 Triangle Wall Wash Tracklight
STWINC
APPLICATIONS
STW T4 Quartz Wall Wash Fixture provides even wall wash distribution.
FEATURES
Rotation lock available on TEK100, HTEK100 and GA100 adaptors.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standards No. 1598.- INC QT4 7" Round Open Downlight
APPLICATION
7" Round QT4 quartz downlight with special tilt/ lock for slope ceiling.
FEATURES
Rotates 360°, tilts/ locks to 35° for slope/ domed ceilings.
Die-cast aluminum heat sink.
Vycor® Safety Glass Lens is standard.
Intended for Non-IC new construction.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Trim spun from .063 high purity aluminum and fi nished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.
- INC Prismatic 12"/16"/22" DDH Series
PRDDH12INC,PRDDH16INC,PRDDH22INC
APPLICATION
Prismatic Acrylic Tech pendant offers modern style with a variety of lamping options.- INC Pier Light Straight Int./Ext.
PN1411INC
INTERIOR / EXTERIOR
APPLICATION
The contemporary Pier Light is both a beacon and an architectural element.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Pier Light Short Int./Ext.
PS1408INC,PS1609INC,PS2011INC
INTERIOR / EXTERIOR
APPLICATION
Compact and contemporary the Pier Light Short is a shallow version of the pier light, for general area lighting. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Pier Light Series Int./Ext.
↵
PL1411INC,PL1613INC,PL2015INC
INTERIOR / EXTERIOR
APPLICATION
The Pier Light RLM has a nautical design for decorative lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC PAR64 Stage Tracklight
SAR64INC
APPLICATIONS
PAR64 stage lighting style track head for Incandescent lamping.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Fuse holder standard, Consult Factory for fuse specifications. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC PAR56 Stage Tracklight
SAR56INC
APPLICATIONS
Stage lighting style track head for PAR56 lamping.
FEATURES
Housing tilts and locks for precision aiming.
Beam rotation lock.
Rotation lock available on TEK100 and GA100 adaptors.
Accepts up to 3 accessories.
Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
Variety of dimming, controls and battery backup available.
LABELS
Manufactured and tested to UL standard No. 1598. ETL Listed.- INC PAR46 Stage Tracklight
SAR46INC
APPLICATIONS
PAR46 stage lighting style track head for Incandescent lamping.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC PAR38 Stage Tracklight
SAR38INC
APPLICATIONS
PAR38 rugged stage lighting style track head for Incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 2 accessories. Positive lock bracket disk. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC PAR38 Stage Tracklight
SNR38INC
APPLICATIONS
PAR38 Stage lighting style track head with integral one piece snoot
for Incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 2 accessories. Positive locking bracket. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC PAR38 Round Open Downlight
SGRMP5INC, SGRMP6INC, SGRMP7INC, SGRMP8INC, SGRMP9INC, SGRMP10INC and SGRMP12INC
FEATURES:
Round remodeler ring.
Removeable J-Box, whip. Clips to intall ring.
Ring fastens to ceiling with adjustable bars. (Mechanically Locks)
Stop flange at bottom.
Ring adjusts +/- .5 (1/2”) for uneaven installation in aperture.
ADVANTAGES:
Works in uneven holes and uneven ceilings up to 1 1/2” thick.
RATING:
Manufactured and tested to UL Standards No. 1598/8750.- INC PAR30L Series 6" Regressed Razor
RC66NF3INC, RC612NF3INC, RC618NF3INC, RC624NF3INC
REGRESSED RAZOR EDGE / NON-IC RATED
APPLICATION
RC series PAR30L Incandescent modular fixture for retail, residential and commercial accent lighting.- INC PAR30L Series 6" Regressed Beveled
RC66RT3INC, RC612RT3INC, RC618RT3INC, RC624RT3INC
REGRESSED BEVELED FLANGED / NON-IC RATED
APPLICATION
RC series PAR30L Incandescent modular fixture for retail, residential and commercial accent lighting.- INC PAR30L Series 6" Flush Flat
RC66FT3INC, RC612FT3INC, RC618FT3INC, RC624FT3INC
FLUSH FLAT FLANGED / NON-IC RATED
APPLICATION
RC series PAR30L Incandescent modular fixture for retail, residential and commercial accent lighting.- INC PAR30 Stage Tracklight
SAR30INC
APPLICATIONS
PAR30 stage lighting track head for Incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
120V only.
CODE COMPLIANCE
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC PAR20-30-38 Gimbal Ring Tracklight
SPTB722
APPLICATIONS
PAR lamp gimbal style tracklight.
FEATURES
For Use with Spectrum Lighting “Basix” Track.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V only.
LABELS
UL listed to Standard No. 1598.- INC PAR20 Stage Tracklight
SAR20INC
APPLICATIONS
PAR20 mini stage lighting track head for incandescent lamps.
FEATURES
Tilt and rotation points for optional aiming. Accepts up to 3 accessories. Hinged door for easy re-lamping.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun/Fabricated .063 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC PAR20 Series 6" Regressed Razor
RC66NF2INC, RC612NF2INC, RC618NF2INC, RC624NF2INC
REGRESSED RAZOR EDGE / NON-IC RATED
APPLICATION
RC series PAR20 Incandescent modular fixture for retail, residential and commercial accent lighting.- INC PAR20 Series 6" Regressed Beveled
RC66RT2INC, RC612RT2INC, RC618RT2INC, RC624RT2INC
REGRESSED BEVELED FLANGED / NON-IC RATED
APPLICATION
RC series PAR20 Incandescent modular fixture for retail, residential and commercial accent lighting.- INC PAR20 Series 6" Flush Flat
RC66FT2INC, RC612FT2INC, RC618FT2INC, RC24FT2INC
FLUSH FLAT FLANGED / NON-IC RATED
APPLICATION
RC series PAR20 Incandescent modular fixture for retail, residential and commercial accent lighting.- INC PAR20 MD Tracklight
CAR20MDINC
APPLICATIONS
Mini cylinder lighting track head for PAR20 lamps.
FEATURES
Designed for shallow mounting areas (5.3" to track). Quick twist front bezel. Max watts label for low watts, Inc or LED lamps. Tilt and rotation points for optional aiming.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Machined and cast aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for dry locations. Manufactured and tested to UL Standard No. 1598.- INC PAR Basix Line Voltage Tracklight
TL880PAR20, TL880PAR30, TL880PAR38
APPLICATIONS
Spectrum Basix track for line voltage PAR lamp base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.- INC PAR Basix Line Voltage Tracklight
TL704S, TL704M, TL704L
APPLICATIONS
Spectrum Basix track for line voltage PAR lamp base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.- INC PAR Basix Line Voltage Tracklight
TL960
APPLICATIONS
Spectrum Basix track for line voltage PAR lamp base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL/ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.- INC PAR 6" Shallow Estimator
SP6000PSH, SP6000PRMSH
APPLICATION
6" SP Estimator series PAR30/PAR38 Downlight for general illumination features a wide range of new, remodel and IC housings.
FEATURES
This series offers new construction and retrofit options. Insulated Ceiling option for New and Remodel fixtures. Wide variety of trims for PAR30 and PAR38 lamps.
FINISH
Wide range of anodized, painted and metal trim finishes available.
ELECTRONICS
Junction box pre-wired, grounded, thermally protected. 120v standard.
277v optional.
CONSTRUCTION
Housing/frame constructed of stamped galvanized steel and aluminum. Trims are spun, stamped and cast metal.
CODE COMPLIANCE
UL listed for damp locations. Wet location available on some trims. Manufactured and tested to UL standards No. 1598/8750.- INC PAR 6" Round Downlight
SP6000P, SP6000PRM, SP6000PICAT
APPLICATION
6" SP Estimator series PAR30/PAR38 Downlight for general illumination features a wide range of new, remodel and IC housings.
FEATURES
This series offers new construction and retrofit options. Insulated Ceiling option for New and Remodel fixtures. Wide variety of trims for PAR30 and PAR38 lamps.
FINISH
Wide range of anodized, painted and metal trim finishes available.
ELECTRONICS
Junction box pre-wired, grounded, thermally protected. 120v standard.
277v optional.
CONSTRUCTION
Housing/frame constructed of stamped galvanized steel and aluminum. Trims are spun, stamped and cast metal.
CODE COMPLIANCE
UL listed for damp locations. Wet location available on some trims. Manufactured and tested to UL standards No. 1598/8750.- INC PAR 4"-6" Trimless Open
SG4PZIN/PAR20, SG5PZIN/PAR30, SG6PZIN/PAR38
APPLICATION
Round trimless aperture downlight for Incandescent lamps.
FEATURES
Reflector designed for deep cutoff.
Intended for Non-IC new construction.
Posi-lock mechanical reflector attachment.
Integral mesh fitting for trim-free installation.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Adjustable mounting brackets supplied with 27” long, heavy ga. galvanized steel bar hangers.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- INC PAR 4" Round Trimless Downlight
SG4PZIN
APPLICATION
4" aperture series with deep cutoff for flush fit plaster installations.
FEATURES
Efficient reflector design optimized for Incandescent or LED lamps. Posi-lock reflector attachment. Integral 5/8" (0.625) plaster ring. Maximum wattage label (MWL) for low wattage Incandescent or LED lamps. Tool-less ballast access. Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector. Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel. Reflectors spun from .063 high purity aluminum and finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598. ETL listed for damp locations.- INC Open Reflector Int. Only
OR1212, OR1818
APPLICATION
The Open Reflector RLM offers 80% downlight and 20% up-light.- INC Open 3" Round Cylinder
SPC0306INC
APPLICATION
3" Compact round cylinder series for use with PAR lamps.
- INC Nautical Light Interior/Exterior
NL1008INC
INTERIOR / EXTERIORAPPLICATION
Nautical Light RLM series for decorative area lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Nautical Light Interior/Exterior
NL1012INC
INTERIOR / EXTERIOR
APPLICATION
Nautical Light RLM series for decorative area lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Mini Pier Light Interior/Exterior
MPN1209INC
INTERIOR / EXTERIOR
APPLICATION
The compact and contemporary Mini Pier Light is both a beacon and an architectural element. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Mini Dock Light Int./Ext.
DG09INC,DS09INC,DV06INC
INTERIOR / EXTERIOR
APPLICATION
Mini Dock Light INC Series for area lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Milk Shade Interior Only
GS1410INC,GS2112INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
The Milk Shade Pendant offers traditional looks with modern lamping options.
INC Series is designed for covered or indoor dry/damp locations.- INC Lava Cone Interior Only
LC50INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Cafe series offers a playful variety of fixture shapes.
INC Series is designed for covered or indoor dry/damp locations.- INC Half Dome
HD24INC
APPLICATION
Half dome hemisphere pendant for decorative area lighting.
- INC GU10 Basix Line Voltage Tracklight
TL010GU10
APPLICATIONS
Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. Accepts up to 3 accessories. Front Loading lamp / accessory ring adaptors fit a wide range of lamps. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Die-cast aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.- INC GU10 Basix Line Voltage Tracklight
TL020GU10
APPLICATIONS
Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun and Die-cast aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.- INC GU10 Basix Line Voltage Tracklight
TL030GU10
APPLICATIONS
Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun and Die-cast aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.- INC GU10 Basix Line Voltage Tracklight
TL040GU10
APPLICATIONS
Spectrum Basix track for line voltage GU10 base lamps.
FEATURES
Tilt and rotation points for optimal aiming. May be used with LED lamps.
FINISH
Variety of powdercoat finishes available.
CONSTRUCTION
Spun / fabricated .063 5052-H32 aluminum.
ELECTRONICS
120V only.
LABELS
UL / ETL listed for damp locations. Manufactured and tested to UL Standard No. 1598.- INC Giant Dome Interior Only
GD2619INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Giant Dome fixture offers wide distribution for general illumination.
INC Series is designed for covered or indoor dry/damp locations.- INC Flat Pendant Interior Only
FP1906INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Cafe series offers a playful variety of fixture shapes.
INC Series is designed for covered or indoor dry/damp locations.- INC Flat Back Cylinder
SPTB704
APPLICATIONS
Flat back “Classic” PAR can tracklight.
FEATURES
Rotates 359° degrees, tilts 60° degrees.
Front loading MR16 lamp/lens.
For use with Spectrum Basix track (TM3) series.
FINISH
Variety of powdercoat finishes available.
ELECTRONICS
120V only.
LABELS
UL listed to Standard No. 1598.- INC Expanded Dome Int./Ext.
ED2015INC
INTERIOR / EXTERIOR
APPLICATION
The Expanded Dome has an LED integral driver and LED for a simple installation. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Euro Bullet Interior Only
ET60INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Cafe series offers a playful variety of fixture shapes.
INC Series is designed for covered or indoor dry/damp locations.- INC Emblem Sign Interior/Exterior
EB0910INC,EB1214INC
INTERIOR / EXTERIOR
APPLICATION
Emblem Sign light is perfect for a variety of sign and surface lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Domo Pendant
EG1612INC
APPLICATION
Domo Pendant is perfect for decorative and retail lighting.
- INC Deep Bowl Interior/Exterior
DB1009INC,DB1211INC,DB1413INC,
DB1615INC,DB1817INC
INTERIOR / EXTERIOR
APPLICATION
The Deep Bowl is one of our most popular RLM styles for general lighting.
INC Series is designed for indoor damp locations or outdoor wet locations.- INC Dedal Pendant
TD1617INC
APPLICATION
Dedal Pendant is perfect for decorative and retail lighting.
- INC Decorative Socket Pendant
DSP1INC,DSP2INC,DSP3INC,DSP4INC,DSP5INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Decorative socket pendant for use with LED and incandescent lamps.
INC Series is designed for indoor locations.- INC Decorative Cast Gimbal
SPTB720S, SPTB720M, SPTB720L
APPLICATIONS
Spectrack basix series decorative die cast gimbal.
FEATURES
Unique front bezel adjusts to fit a variety of lamps including LED PAR lamps. Rotates 359° degrees, tilt 60° degrees. For use with Spectrum Basix track (TM3) series.
FINISH
Black, white and satin nickel available.
CONSTRUCTION
Die cast aluminum.
ELECTRONICS
120v only.
LABELS
UL/ETL listed for dry location. Manufactured and tested to UL standard No. 1598.- INC Deco Lamp Options
- INC Concordia Pendant Mount Interior Only
CN1812INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
The Pendat Mount Concordia is one of our most elegant RLM styles.
INC Series is designed for covered or indoor dry/damp locations.- INC Cloud 10" Surface Light
SX1003RDINC
APPLICATION
Cloud 10" surface light for area illumination.
- INC Bullet Interior Only
BU40INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Cafe series offers a playful variety of fixture shapes.
INC Series is designed for covered or indoor dry/damp locations.- INC Angled Reflector with Adjustable Lamp
AR1214INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Angled Reflector light is perfect for a variety of sign and surface lighting applications. INC Series is designed for covered or indoor dry/damp locations.- INC Angled Contemporary Interior Only
AC1007INC
INTERIOR ONLY / DAMP LOCATION
APPLICATION
Cafe series offers a playful variety of fixture shapes.
INC Series is designed for covered or indoor dry/damp locations.- INC Angle Reflector Int./Ext.
AR1012INC,AR1214INC
INTERIOR / EXTERIOR
APPLICATION
Angled Reflector light is perfect for a variety of sign and surface lighting applications. INC Series is designed for indoor damp locations or outdoor wet locations.- INC Accent Corner Surface Mount
CM1010INCX1, CM1020INCX2, CM1030INCX3,
CM1040INCX4APPLICATION
CM10 series modular accent light designed for ceiling corner mounting.- INC 9" Round Open Downlight
APPLICATION
9" Round PAR46/ PAR56 downlight with reflector.
FEATURES
Efficient trim design optimized for Incandescent lamps.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Wide Distribution
• Series features a lamp placed for wide distribution.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. galvanized steel.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• 120 Volt is standard. Use option T277 for 277v supply feed.
• UL Listed for Damp Locations.- INC 8" Round Shallow Lens
• 8” Shallow incandescent series.
• Available open and lensed.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 8" Round Shallow Downlight
• 8” Shallow incandescent series.
• Available open and lensed.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 8" Round Pull Down Accent
SGP8IN/PDWH/8402, SGP8IN/PDBL/8402
APPLICATION
Adjustable Pull Down PAR30/ PAR38 accent light for Incandescent lamps.
FEATURES
Fixture rotates 360°/ locks 35°/ pulls down 6".
Can be set fully recessed or fully pulled down.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Open Wall Wash
APPLICATION
Series features a deep reflector for excellent cutoff and even wall wash.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Open Wall Wash
• 8” incandescent series.
• Available open, lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 8" Round Open Downlight
APPLICATION
8" Round PAR30/ PAR38 open downlight for Incandescent lamps.
FEATURES
Efficient trim design for PAR lamps.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp location.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Open Downlight
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Open Downlight
• 8” incandescent series.
• Available open, lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 8" Round Open Cylinder PAR
SPC0810INC
APPLICATION
8" Diameter cylinder series for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Spun .063 1100-0 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 8" Round MRI Wall Wash
SGW8MRI/AR8935
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features an aluminum wall wash reflector with white flange (standard).
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 8" Round MRI Open Downlight
SGH8MRI/AR8615
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features a shallow aluminum reflector with white flange. (Standard)
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard. Use option T277 for 277v supply feed.
• Manufactured and tested to UL standard No. 1598. ETL Listed- INC 8" Round MRI Open Downlight
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features an aluminum reflector with white flange (Standard).
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard. Use option T277 for 277v supply feed.
• Manufactured and tested to UL standard No. 1598. ETL Listed.- INC 8" Round MRI Lens Downlight
SG8MRI/AR8125
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features an aluminum reflector with regressed lensed trim.
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 8" Round MRI Lens Downlight
SGH8MRI/AR8625
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features a shallow aluminum reflector regressed lensed trim.
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 8" Round Lens Wall Wash
SGL8IN/AR8900
APPLICATION
SGL8IN series spread lens Wall Wash produces an even wall illumination.
FEATURES
Efficient trim design with a variety of lens options.
Lamp/ trim rotates 360°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Reflectors spun from .063 high purity aluminum & finished to specifi cation.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Lens Wall Wash
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Lens Downlight
APPLICATION
Series features a deep reflector and a wide variety of lenses and splays.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Lens Downlight
• Series features a shallow reflector for low plenum applications.
• Intended for Non-IC new construction.
• Frame constructed of 20 ga. galvanized steel.
• Supplied with 27” long, heavy ga. galvanized steel bar hangers.
• 120 Volt is standard. Use option T277 for 277v supply feed.
• UL Listed for Damp Locations.- INC 8" Round Lens Downlight
• 8” incandescent series.
• Available open, lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 8" Round Lens Downlight
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp location. Wet location available.
Manufactured and tested to UL Standard No. 1598.- INC 8" Round Lens Cylinder PAR
SPC0810INC
APPLICATION
8" Diameter cylinder series for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Spun .063 1100-0 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 8" Round Lens Adjustable
SGA8IN/AR8500, SGA8IN/AR8550
APPLICATION
8" Round PAR30/ PAR38 accent light for Incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 360°. Lamp tilts/ locks 35°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.
- INC 8" Round Direct/Indirect Open PAR
SPC0824UDINC
APPLICATION
8" Cylinder series provides direct and indirect lighting for use with INC lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 8" Round Direct/Indirect Lens PAR
SPC0824UDINC
APPLICATION
8" Cylinder series provides direct and indirect lighting for use with INC lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Wet location optional. Manufactured and built to UL standard No. 1598.- INC 8" Round Cylinder PAR
SPC0812SQINC
APPLICATION
8" Square cylinder series for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Formed .063 aluminum reflector/trim finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 8" Mini Can Quartz Open Cylinder QT4
SPC0812INC
APPLICATION
8" Diameter cylinder series for use with Quartz Mini Can lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Fabricated .080 5052 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector formed high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 8" Mini Can Quartz Lens Cylinder QT4
SPC1220INC
APPLICATION
12" Diameter cylinder series for use with Quartz Mini Can lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 7" Shallow Open Downlight
• 7” Shallow incandescent series.
• Available open and lensed.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Shower Light
• 7” Shallow incandescent series.
• Wet location/shower lens.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Open Wall Wash
APPLICATION
Series features a deep reflector for excellent cutoff and even wall wash.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Open Wall Wash
• 7” Horizontal incandescent series, excellent cutoff.
• Available open, lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Open Wall Wash
• 7” incandescent series.
• Available open, Lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Open Downlight
APPLICATION
7" round QT4 quartz downlight with ellipsoidal reflector.
FEATURES
Die-cast heat sink.
Vycor® Safety Glass Lens is standard.
Intended for Non-IC new construction.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Trim- spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Open Downlight
APPLICATION
Series features a shallow reflector for low plenum applications.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Open Downlight
APPLICATION
7" Round R30/ PAR30/ PAR38 open downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp location.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Open Downlight
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Open Downlight
• 7” Horizontal incandescent series, excellent cutoff.
• Available open, lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Open Downlight
• 7” incandescent series.
• Available open, Lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Open Downlight
• 7” incandescent series.
• Available open, Lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Open Downlight
• 7” Deep incandescent series.
• Available Open.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Manufactured and tested to UL No. 1598.- INC 7" Round MRI Wall Wash
SGW7MRI/AR7925
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features an aluminum wall wash reflector with white flange (standard).
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 7" Round MRI Open Downlight
SG7MRI/AR7115
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features an aluminum reflector with white flange (standard).
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 7" Round MRI Open Downlight
SGH7MRI/AR7415
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features a shallow aluminum reflector with white flange (standard).
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 7" Round MRI Lens Downlight
SG7MRI/AR7125
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features a specular aluminum reflector with regressed lensed trim.
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 7" Round MRI Lens Downlight
SGH7MRI/AR7425
• 5052 all aluminum frame and hardware. (non-ferrous)
• For use in MRI equipment areas.
• Series features a shallow aluminum reflector regressed lensed trim.
• Intended for Non-IC new construction.
• For IC applications, consult factory.
• Adjustable mounting brackets standard.
• 120 Volt is standard.- INC 7" Round Lens Wall Wash
APPLICATION
7" Round PAR30L/ PAR38 lens wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Lamp/ trim rotate 360°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Lens Downlight
APPLICATION
7" aperture Lensed downlight series for Incandescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum and finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Lens Downlight
APPLICATION
Series features a shallow reflector for low plenum applications.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Lens Downlight
• 7” Horizontal incandescent series, excellent cutoff.
• Available open, lensed and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Lens Downlight
• 7” Shallow incandescent series.
• Available open and lensed.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 7" Round Lens Downlight
APPLICATION
7" Round R30/ PAR30L/ PAR38 lens downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 277v supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL listed for Damp location. Wet location available.
Manufactured and tested to UL 1598.- INC 7" Round Lens Downlight
APPLICATION
7" aperture Lensed downlight series for Incandescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Lens Adjustable
SGA7IN/AR7500
APPLICATION
7" round R30/ PAR30L/ PAR38 accent light for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 360°. Lamp tilts/ locks 35°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 7" Round Esimator R Series
• “Estimator” Series is a quality housing with a variety of trim options.
• Easy to install.
• # 20 GA steel pan.
• Aluminum housing dissipates heat.
• 12” bar hangers expandable to 24” standard
• Junction box pre-wired, grounded, thermally protected.
• 3” from insulation required.
• Suitable for use in damp location.
• Manufactured and assembled in U.S.A.
• Manufactured and tested to UL standard No. 1598/ETL.- INC 7" Pull Down Wall Wash
APPLICATION
QT4 Quartz Lamp pull down wall wash.
FEATURES
Pull down to 35° and lock for smooth wall wash effect.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Trim formed from extruded aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598. ETL Listed.- INC 7" Deep Open Downlight
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 6" Square Open Downlight
SGD6SQIN/AR0606, SGD6SQIN/AR0306
APPLICATION
6" Square PAR30/ PAR38 downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 6" Square Open Downlight
APPLICATION
6" Square QT4 Quartz downlight with ellipsoidal reflector.
FEATURES
Die-cast aluminum heat sink.
Vycor® Safety Glass Lens is standard.
Intended for Non-IC new construction.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 6" Square Open Cylinder PAR
SPC0609SQINC
APPLICATION
6" Square cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Formed .063 aluminum reflector/trim finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Square Open Adjustable
SGA6SQIN
APPLICATION
6" square PAR30/ PAR38 accent light for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 360°. Lamp tilts/ locks 35 °.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.
- INC 6" Square Lens Wall Wash
APPLICATION
6" Square PAR30/ PAR38 lens wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 6" Round Open/Slope Cylinder
SPC0609SLINC
APPLICATION
6" Diameter cylinder series with custom adaptor for slope ceiling.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Round Open Wall Wash
• 6” incandescent series.
• Available open, lens and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 6" Round Open Downlight
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- INC 6" Round Open Downlight
• Standard “White Can” housing with a range of trim colors.
• Full reflector improves effiency with A-Type lamps.
• Reflectors spun heavy gauge aluminum with white poly flange.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard
• Junction box pre-wired, grounded, thermally protected.
• 3” from insulation required.
• Suitable for use in damp location.
• Manufactured and tested to UL standard No. 1598/ETL Listed.- INC 6" Round Open Downlight
• 6” Incandescent series.
• Available open, lens and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 6" Round Open Cylinder w/ Yoke
SPCYK0609INC
APPLICATION
6" Diameter cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Round Open Cylinder PAR
SPC0609INC
APPLICATION
6" Diameter cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Round Multi Faceted
APPLICATION
6” aperture series with multi-faceted reflector for distinct look.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL Listed for Damp Locations.
Manufactured and tested to UL Standard No. 1598.- INC 6" Round Lens Downlight
APPLICATION
Series features a deep reflector for excellent cutoff.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- INC 6" Round Lens Downlight
• 6” incandescent series.
• Available open, lens and wall wash.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 6" Round Lens Cylinder w/ Yoke
SPCYK0609INC
APPLICATION
6" Diameter cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Round Lens Cylinder PAR
SPC0609INC
APPLICATION
6" Diameter cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Round Direct/Indirect Open
SPC0618UDINC
APPLICATION
6" Cylinder series provides direct & indirect lighting for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded and machined 6063 seamless aluminum fixture housing. Silicone gasket seals optical chamber. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. One piece finish trim spun from .063 thick high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Round Direct/Indirect Lens
SPC0618UDINC
APPLICATION
6" Cylinder series provides direct & indirect lighting for use with incandescent lamps.FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded and machined 6063 seamless aluminum fixture housing. Silicone gasket seals optical chamber. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. One piece finish trim spun from .063 thick high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Wet location optional. Manufactured and built to UL standard No. 1598.- INC 6" Round Adjustable Cylinder PAR
SPC0609ADJINC
APPLICATION
6" Internally Adjustable Cylinder Series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Round Adjustable Cylinder PAR
SPC0612ADJINC
APPLICATION
6" Diameter cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 6" Direct/Indirect Cylinder PAR
SPC0618SQUDINC
APPLICATION
6" Square cylinder series provides direct and indirect lighting for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Formed seamless aluminum fixture housing. Silicone gasket seals optical chamber. Specular primary optical reflectors provide high efficiency illumination optional. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. One piece finish trim spun from .063 thick high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Wet location option. Manufactured and built to UL standard No. 1598.- INC 6" Adjustable Retrofit Series
SGRTA6INC
APPLICATION
6" Round adjustable retrofit accent PAR38 fixture for general downlighting.
FEATURES
Designed for retrofit into existing fixture, or remodel where no fixture exists. Tool-less access.One piece-self-flanged trim. Intended for Non-IC retrofit. Goof ring available for oversized or damaged ceiling installations. Posi-lock trim retention torsion springs. Designed for 0.5" - 1" thick ceilings. Contact factory for ceiling applications (over 1").
FINISH
Variety of powdercoat and anodized finishes available.
ELECTRONICS
120 Volt is standard. Use option T277 for 277v supply feed.
CONSTRUCTION
Housing/frame constructed of .060 aluminum to resist corrosion. Self flanged one piece trim spun from 0.060" thick high purity aluminum and finished to specification.
INSTALLATION
Goof rings available for rough or OB-Round holes. Integral retrofit quick mount clips. Optional clips, springs and extended whips available (See options and installation details).
LABELS
ARRA Compliant. UL/ETL Listed for Damp location. Manufactured and tested to UL standard No. 1598.- INC 5" Shallow Adjustable Accent
SGA5SIN
APPLICATION
5" Shallow round PAR30 accent light for incandescent lamps.- INC 5" Round Shallow Open
• 5” Shallow incandescent series.
• Available open, wall wash and lens.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No.1598.- INC 5" Round Open Wall Wash
SGW5IN/AR5925
APPLICATION
5" aperture Open Wall Wash series for Incandescent lamps.
FEATURES
Wall Wash reflector design accomodates “A” type lamps.
Intended for Non-IC new construction.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- INC 5" Round Open Wall Wash
• 5” Shallow incandescent series.
• Available open, wall wash and lens.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No. 1598.- INC 5" Round Open Downlight
APPLICATION
5" aperture open downlight series for Incandescent lamps.
FEATURES
Efficient reflector design accomodates A, PAR, and R lamps.
Intended for Non-IC new construction.
Posi-lock mechanical reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- INC 5" Round Open Downlight
APPLICATION
Small aperture series with medium cutoff for Incandescent lamps.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- INC 5" Round Open Downlight
SGD5IN/AR5400, SGD5IN/AR5450
APPLICATION
5" Round PAR20/ PAR30 downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location available.
Manufactured and tested to UL Standard No. 1598.
- INC 5" Round Open Downlight
• “Estimator” Series is a quality housing with a variety of trim options.
• Easy to install.
• # 20 GA steel pan.
• Aluminum housing dissipates heat.
• 12” bar hangers expandable to 24” standard
• Junction box pre-wired, grounded, thermally protected.
• 3” from insulation required.
• Suitable for use in damp location.
• Manufactured and assembled in U.S.A.
• Manufactured and tested to UL standard No. 1598/ETL Listed.- INC 5" Round Open Downlight
SP5000A/5150
This product has been discontinued.
For comparable fixtures see SP5000A/5110 & SP5VF/5310.
- INC 5" Round Open Cylinder PAR20
SPC0507INC
APPLICATION
5" Cylinder Series for use with PAR16 and PAR20 lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 5" Round Lens Wall Wash
APPLICATION
5" Round PAR20/PAR30 short lens, wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options. Lamp/trim rotate 360°. Integral 5/8" (0.625) plaster ring. Maximum wattage label (MWL) for low wattage Incandescent or LED lamps. Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim. Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum. Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ETL Listed for Damp locations. Wet location avaliable. Manufactured and tested to UL Standard No. 1598.- INC 5" Round Lens Downlight
APPLICATION
5" aperture lens downlight series with a wide variety of lenses and splays.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet Location Available.
Manufactured and tested to UL 1598.- INC 5" Round Lens Downlight
• 5” Shallow incandescent series.
• Available open, wall wash and lens.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No.1598.- INC 5" Round Lens Downlight
• 5” Deep incandescent series.
• Available open, wall wash, and lens.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No.1598.- INC 5" Round Deep Downlight
• 5” Deep incandescent series.
• Available open, wall wash, and lens.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No.1598.- INC 4"-12" Rtrofit Downlight Ring
SGRM4IN, SGRM5IN, SGRM6IN, SGRM7IN, SGRM8IN, SGRM9IN, SGRM10IN, SGRM12IN
• Easy to install remodeling system.
• .063 Heavy gauge reflector, self flange/white flange standard.
• Remodel ring made of 20 gauge galvanized steel for corrosion resistance.
• Many finishes available on reflectors and flanges.
• Return flange on ring for positive "stop".
• Aid in "trimming out" ceiling opening.
• Mounting hardware provided.
• Options include extended whip length.
• Junction box removable, 13" whip standard
• Electronic ballast 120/277.
• ETL listed- INC 4"-12" Retrofit Split Frame
SPRM4IN, SPRM5IN, SPRM6IN SPRM7IN, SPRM8IN, SPRM9IN, SPRM10IN, SPRM12IN
• Easy to install remodeling system.
• .063 Heavy gauge reflector, self flange/white flange standard.
• Frame with junction box (and ballast) fits into existing aperture.
• Many finishes available on reflectors and flanges.
• Positive locking clips on frame to secure reflector.
• Options include extended whip lengt, UL Listed.
• Made in USA.- INC 4"-12" Retrofit Downlight Series
SGRT4IN, SGRT5IN, SGRT6IN, SGRT7IN, SGRT8IN, SGRT9IN, SGRT10IN, SGRT12IN
• Easy to install remodeling system, for installations where frame is existing.
• . 063 Heavy gauge reflector, self flange/white flange standard.
• Other finishes and trims may be available.
• Options include extended whip length, goof ring, and fusing.
• 13” whip standard.
• Manufactured and tested to UL standard No. 1598.- INC 4" Square Open Downlight
APPLICATION
Square aperture MR16 downlight with good cutoff.
FEATURES
Efficient trim design optimized for Halogen lamps.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL Standard No. 1598.- INC 4" Square Open Downlight
APPLICATION
4" square PAR20 downlight for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL listed for damp locations. Wet locationavaliable.
Manufactured and tested to UL Standard No. 1598.
- INC 4" Square Open Adjustable
APPLICATION
4" Square PAR20 accent light for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 36°. Lamp tilts/ locks 35°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.
- INC 4" Square Lens Wall Wash
APPLICATION
4" Square aperture MR16 lens wall wash.
FEATURES
Efficient trim design for smooth wall wash.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Halogen or LED lamps.
Tool-less transformer access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120V Electronic transformer is standard.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL Standard No. 1598.- INC 4" Round Open Wall Wash
APPLICATION
Small aperture series with deep cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
ETL listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 4" Round Open Downlight
APPLICATION
Small aperture series with medium cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
ETL listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 4" Round Open Downlight
APPLICATION
4" Round PAR20 downlight for Incandescent lamps.
FEATURES
Efficient reflector design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.
- INC 4" Round Open Downlight
APPLICATION
4" aperture series with deep cutoff for Incandescent lamps.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.
ETL listed for Damp locations.- INC 4" Round Open Downlight
SP4000P
APPLICATION
4" SP Estimator series PAR20 Downlight for general illumination features a wide range of new, remodel and IC housings.
FEATURES
This series offers new construction in Non IC and IC listed. Remodel fixture is Non IC only. Wide variety of trims for PAR20 lamps.
FINISH
Wide range of anodized, painted and metal trim finishes available.
ELECTRONICS
Junction box pre-wired, grounded, thermally protected. 120v standard. Optional, 277v to 120v transformer available.
CONSTRUCTION
Housing/frame constructed of stamped galvanized steel and aluminum. Self-flanged one-piece, power-coated aluminum trim.
CODE COMPLIANCE
UL listed for damp locations. Wet location available on 4210FG1 trim. Manufactured and tested to UL standards No. 1598/8750.- INC 4" Round Open Downlight
• “Estimator” Series is a quality reflector system, easy to install.
• Socket cup with medium base socket.
• 12" Bar hangers expandable to 24" standard on new construction model.
• Reflector has socket cup attached to junction box as single assembly.
• Junction box pre-wired, grounded, thermally protected.
• 3” from insulation required.
• Suitable for use in damp location.
• Manufactured and assembled in U.S.A.
• Manufactured and tested to UL standard No. 1598/ETL Listed.- INC 4" Round Open Downlight
• 4” Shallow incandescent series.
• Available open.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Manufactured and tested to UL No.1598.- INC 4" Round Lens Wall Wash
APPLICATION
4" round PAR20 lens wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Lamp/ trim rotate 360°.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.- INC 4" Round Lens Wall Wash
SGL4SQIN
APPLICATION
4" Square spread lens wall wash for incandescent lamps.
FEATURES
Efficient trim design with a variety of lens options.
Trim rotates/ locks 360°. Lamp tilts/locks 35°.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim formed from .050 high purity aluminum and finished to specification.
LABELS
UL/ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 4" Round Lens Adjustable
SGA4IN/AR4500
APPLICATION
4" Round PAR20 accent light for incandescent lamps.
FEATURES
Trim rotates/ locks 360°, lamp tilts/ locks 35°
Efficient trim design with a variety of lens options.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. aluminum.
Trim spun from .063 high purity aluminum and finished to specification.
LABELS
UL/ ETL Listed for Damp Locations. Wet location available.
Manufactured and tested to UL 1598.- INC 4" Round Deep Open
• 4” Deep incandescent series, excellent cutoff.
• Available open.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Manufactured and tested to UL No.1598.- INC 4" Round Cylinder PAR20/PAR30S
SPC0405INC
APPLICATION
4" Cylinder Series for use with PAR20 lamps.
- INC 3" Round Up Down Cylinder
SPC0310UD
APPLICATION
3" Mini wall up down cylinder for hallways and walkway lighting is ADA Compliant.
- INC 3" Round Cylinder
SPC0310D
3" Mini wall cylinder for hallways and walkway lighting is ADA Compliant.
- INC 3" Mini Square Cylinder PAR20
SPC0306SQINC
APPLICATION
3" Compact square cylinder series for use with PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Extruded .125 6063 aluminum fixture housing. Stainless steel hardware with galvanized steel brackets to resist corrosion.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 3" Mini Round Cylinder PAR20
SPC0304INC
APPLICATION
3" Compact round cylinder series for use with PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Stainless steel hardware with galvanized steel brackets to resist corrosion.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 2'x2' Grid Ceiling 4 x PAR38
GC24244XPAR38INC
FLUSH TRIM / NON-IC RATED
APPLICATION
GC 2' x 2' Series INC accent light designed for automotive and retail applications where crisp focused light is desired.- INC 2'x2' Grid Ceiling 2 x PAR38
GC24242XPAR38INC
FLUSH TRIM / NON-IC RATED
APPLICATION
GC 2' x 2' Series INC accent light designed for automotive and retail applications where crisp focused light is desired.- INC 2'x2' Grid Ceiling 1 x PAR38
GC24241XPAR38INC
FLUSH TRIM / NON-IC RATED
APPLICATION
GC 2' x 2' Series INC accent light designed for automotive and retail applications where crisp focused light is desired.- INC 12" Square Exam Light
APPLICATION
12" Square exam light.
FEATURES
Series features a rectangular light pattern for excellent patient examination lighting.
Narrow, Medium and Wide patterns available.
Intended for Non-IC new construction.
Efficient trim design optimized for Incandescent lamps.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on trim.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. powercoated galvanized steel.
Door formed from .063 high purity aluminum & finished to specification.
LABELS
Manufactured and tested to UL Standard No. 1598.- INC 12" Round Open Downlight
APPLICATION
SGH12IN features a shallow plenum height for wide general lighting.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 12" Round Open Downlight
APPLICATION
Series features a deep reflector and excellent cutoff.
FEATURES
Efficient reflector design optimized for Incandescent lamps.
Posi-lock reflector attachment.
Integral 5/8" (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 18 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations.
Manufactured and tested to UL Standard No. 1598.- INC 12" Round Open Downlight
• 12” incandescent series.
• Available open and lensed.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No.1598.- INC 12" Round Open Cylinder PAR38/R
SPC1216INC
APPLICATION
12" Nominal diameter cylinder series for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Fabricated .080 5052 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector formed high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 12" Round Lens Downlight
APPLICATION
12" aperture horizontal A-lamp lens downlight.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 12" Round Lens Downlight
APPLICATION
Series features a deep reflector and a wide variety of lenses and splays.
FEATURES
Efficient reflector design with a variety of lens options.
Posi-lock reflector attachment.
Integral 5/8” (0.625) plaster ring.
Maximum wattage label (MWL) for low wattage Incandescent or LED lamps.
Tool-less ballast access.
Multi-bar adjustable mounting brackets.
FINISH
Variety of powdercoat and anodized finishes available on reflector.
Eco Black (EB) finish available on frame/ housing.
ELECTRONICS
120 Volt is standard. Use option T277 for 277V supply feed.
CONSTRUCTION
Frame constructed of 20 ga. galvanized steel.
Reflectors spun from .063 high purity aluminum & finished to specification.
LABELS
UL/ ETL Listed for Damp locations. Wet location avaliable.
Manufactured and tested to UL Standard No. 1598.- INC 12" Round Lens Downlight
• 12” incandescent series.
• Available open and lensed.
• 20 gauge galvanized frame.
• 12” bar hangers expandable to 24” standard.
• BH27 - 27” bars available.
• Junction box pre-wired, grounded.
• Suitable for use in damp location.
• Lensed fixture has Wet Location option.
• Manufactured and tested to UL No.1598.- INC 12" Round Lens Cylinder PAR38/R
SPC1216INC
APPLICATION
12" Nominal diameter cylinder series for use with incandescent lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Fabricated .080 5052 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Impact resistant tempered glass lenses. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector formed high purity aluminum and finished to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.- INC 12" Round Direct/Indirect
SPC1220UDINC
APPLICATION